API Audio Tranzformer GT Bruksanvisning

API Audio Gitarrförstärkare Tranzformer GT

Läs nedan 📖 manual på svenska för API Audio Tranzformer GT (2 sidor) i kategorin Gitarrförstärkare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

The API TranZformer®

provides unsurpassed sonic sculpting by combining a legendary API 525

“feedback” type compressor circuit with an inductor-based tone control inspired by the vintage API 553

program equalizer in a versatile and robust guitar pedal/direct box with balanced and unbalanced outputs.

Features include independent tone and compression in/out footswitches, phase inverters on each output,

ground lift, clip indicator, transformer output, true hardwire bypass, and of course the classic API sound.

SIGNAL FLOW (from right to left) : Input > GAIN > COMP > TONE > Transformer Output

AUDIO CONTROLS

1. GAIN: Input level; +9dB to +30dB; More gain creates more compression

2. COMP (compression): Determines amount of compression (gain-reduction); Higher

numbers provide more compression (lower threshold)

3. CLIP LED: Illuminates to indicate Input Gain or Output stage (pre Level) clipping

4. TONE (equalizer): 3-band +/- dB EQ (see graph on page 2) 15

 200Hz peaking EQ; low-end (body, warmth, power…)

 1.5kHz peaking EQ; mid-range (presence, attack, articulation…)

 5kHz shelving EQ; high-end (air, brightness, brilliance, edge…)

5. Output LEVEL: -inf. to 0dB attenuator; 0db (no cut) is fully clockwise

 Sets level for ¼” unbalanced output only (balanced output level is fixed)

FOOTSWITCHES

A. COMP (compressor): Engage/disengage compressor; lit LED when engaged

B. TONE (equalizer) Engage/disengage equalizer; lit LED when engaged :

C. BYPASS: Hardwired unbalanced bypass; lit LED when BYPASSED

GT GUITAR PEDAL USER GUIDE

INPUTS & OUTPUTS

SETUP

 Plug cable from instrument output into TranZformer INSTRUMENT INPUT. GT

 Connect UNBALANCED OUT to an amplifier input or the next pedal in your chain.

 The BALANCED OUT can be connected to a balanced line-level input for recording or live.

USE Starting settings: Disengage BYPASS, engage TONE & COMP footswitches, set all three TONE

controls to 0 dB boost/cut (12 o’clock), and LEVEL fully clockwise (0dB).

 Adjust GAIN to set input level to the compressor; Higher GAIN creates more compression at a

given COMP setting; Reduce GAIN to avoid clipping if needed.

 Set COMP as desired for increased sustain, perceived loudness, and punchiness; higher COMP

numbers provide increased gain reduction and greater compression.

 SET the three TONE controls to achieve the desired tone. Each band has +/- 15dB of boost & cut

(reduce boost if clipping is indicated).

 Adjust the LEVEL control to set the level of the ¼” UNBALANCED OUTPUT (Does not reduce .

clipping of internal signal.) The level of the BALANCED OUTPUT is fixed.

 Engage the PHASE inverters and the GROUND LIFT as needed.

CONNECTIONS

1. INSTRUMENT INPUT :

¼” hi-Z, unbalanced

2. UNBALANCED OUTPUT (to amp):

¼” hi-Z

Fed directly from INPUT in BYPASS

3. BALANCED OUTPUT :

3-pin XLR male, lo-Z

Line level

NOTE XLR is muted in BYPASS –

4. 18 Volt DC power input (on back)

500mA maximum

2.1mm x 5.5mm barrel connector

Tip negative

OUTPUT CONTROLS

A. Unbalanced Output PHASE REVERSE

Inverts unbalanced output polarity

B. Balanced Output PHASE REVERSE

Inverts balanced output polarity

C. Output GROUND LIFT

Eliminates hum from ground loops

TranZformer GT

TONE Control

Frequency

Response

API, TranZformer, and the

API ‘spears’ logo are

registered trademarks of

Automated Processes, Inc.

Produktspecifikationer

Varumärke:	API Audio
Kategori:	Gitarrförstärkare
Modell:	Tranzformer GT

Behöver du hjälp?

Om du behöver hjälp med API Audio Tranzformer GT ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Gitarrförstärkare API Audio Manualer

API Audio Tranzformer GT Bruksanvisning

26 December 2024

API Audio Tranzformer LX Bruksanvisning

26 December 2024

Gitarrförstärkare Manualer

Nyaste Gitarrförstärkare Manualer

Ampeg SVT-410HE Bruksanvisning

28 December 2024

Orange Terror Bass Bruksanvisning

28 December 2024

Markbass MB58R CMD 151 Pure Bruksanvisning

19 December 2024

Blackstar St. James 100 Bruksanvisning

18 December 2024

Hughes & Kettner Spirit of Metal Nano Bruksanvisning

18 December 2024

Hughes & Kettner Spirit of Rock Nano Bruksanvisning

18 December 2024

Hughes & Kettner Spirit of Vintage Nano Bruksanvisning

18 December 2024

Boss KATANA-Mini Bruksanvisning

17 December 2024

Boss KATANA-HEAD MkII Bruksanvisning

17 December 2024

Boss KATANA-AIR Bruksanvisning

17 December 2024