Aputure MC 12-Light Production Kit Bruksanvisning

Aputure Inte kategoriserad MC 12-Light Production Kit

Läs nedan 📖 manual på svenska för Aputure MC 12-Light Production Kit (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
-2- -3-
-9- -10--8-
-1-
Thank You!
Instructions
Detailed product manual for MC 12-Light Production Kit can be found on www.aputure.com.
Product Manual
English
Thank you for purchasing the Aputure MC 12-Light Production Kit. This kit
was designed for owner-operators and rental houses. Including 12
RGBWW Mini LEDs, a wireless charging hard case, four sets of accessories,
and both AC and D-Tap charging, the MC 12-Light Production kit has
everything needed to tackle any lighting challenge.
Please read this product manual carefully.
Keep this product manual and always include it when passing the
product onto third parties.
Do not place the product near any corrosive WARNING:
chemicals. Corrosion may cause the product to malfunction.
Only use a microfiber or dry cloth to clean the product.
Be careful to not damage the light by dropping it or otherwise
introducing physical shock.
Do not leave the product in excessive heat, high temperatures can cause
the product to malfunction.
Please have the product checked by the authorized service or agent if
your product has some problems. Please note that this warranty does
not apply to repair arising out of the malfunction of unauthorized
disassembly, although you may request such repairs on a chargeable
basis.
Use of original Aputure cable accessories is recommended. Please note
that this warranty does not apply to repairs arising out of the
malfunction of non-original Aputure accessories, although you may
request such repairs on a chargeable basis.
The product is certificated by RoHS, CE, KCC and Japan MIC etc. Please
operate the product in full compliance with the operation standards.
Please note that this warranty does not apply to repair arising from
malfunction, although you may request such repairs on a chargeable
basis.
The instructions and information in this manual are based on thorough,
controlled company testing procedures. Further notice will not be given
if the design and specifications change.
8. Attaching the Silicone Diffuser
9. Using the Mounting Tape
10. Using the Magnets
Components List
Adhesive Mounting
Tape (8 pairs)
Silicone Rubber
Diffuser (4 pcs)
MC (12 pcs)
MC 12-Light Wireless
Charging Case (1 pc)
USB Type-C Charging
Cable
(2 pcs)
Power Cable
(1 pc)
D-Tap to D-Tap
Power Cable
(1 pc)
Package includes the following items:
Product Details
-6- -7-
-4-
3. MC Power ON/OFF
Adjust the position of the power switch to turn the light on or off.
*
Don’t attach this device or the magnets to any surface with a temperature
above 80°C. Doing otherwise can damage the magnets.
1
OLED Screen
2 Function Control Wheel
3
Power Switch
4
USB Type-C Charging Port
5
Magnets
6
1/4"-20 Screw Mount
7
8
9
Drawer Latches
Accessory Drawer
Wireless Charging Pads
Status Leds
Power Switch
10
11
AC Power Input
DC D-Tap Input
Rubber D-Tap Cover
USB Type-A Outputs
14
13
12
15
1 2 3 4
7. MC Bluetooth Mode
Press and hold the control wheel for 2 seconds to access the system
menu. Rotate the control wheel to select BT and press the wheel to the
Bluetooth Reset menu. Rotate the control wheel to select "YES" and short
press the wheel to reset the device's Bluetooth pairing, (the pop-up
window displays the current reset progress. The reset process completes
within 5 seconds.) or select "NO" to return to the system menu.
11. Using the Sidus Link APP
4. MC CCT Mode
5. MC HSI Mode
6. MC FX Mode
Press and hold the control wheel for 2 seconds to access the system menu.
Rotate the control wheel to select CCT and press the wheel to enter CCT
mode. In CCT Mode, rotate the control wheel to adjust the color
temperature between 3200-6500K. "Short press" the wheel to select
intensity (INT) control, and turn the wheel to adjust the brightness level
from 0-100%.
* Access more fine control via the Sidus Link mobile application.
Press and hold the control wheel for 2 seconds to access the system menu.
Rotate the control wheel to select HSI and press the wheel to enter HSI
mode. In HSI Mode, "short press" the control wheel to toggle between
HUE/SAT (saturation)/INT (intensity) controls. When controlling HUE,
rotate the control wheel to adjust the hue color from 0-360°. When
controlling saturation (SAT), turn the control wheel to adjust the color
saturation between 0-100%. When controlling intensity (INT), turn the
wheel to adjust the brightness level between 0-100%.
Press and hold the control wheel for 2 seconds to access the system menu.
Rotate the control wheel to select FX and press the wheel to enter FX
mode. In FX mode, rotate the control wheel to toggle between different
lighting FX presets: Paparazzi, Fireworks, Faulty Bulb, TV, Lightning, Party,
Pulsing, Cop car, & Fire. Once you have selected your desired lighting
effect, "short press" the control wheel to access intensity (INT) control.
Rotate the control wheel to adjust the brightness of the lighting eect
from 0-100%.
(1) Paparazzi (2) Fireworks
(3) Faulty Bulb (4) TV
(5) Lightning (6) Party
(7) Pulsing
(9) Fire
(8) Cop Car
-5-
Operation Instructions
1. Powering the MC 12-Light Charging Case
2. Charging
1). Wireless charging
2). DC Power
1). AC Power
* The status LED will flash red to indicate that there is a foreign metal object on
the wireless charging pad. Please remove immediately.
*
WARNING: Do not close the lid when the charging case on or in an active
charging state, to prevent overheating. Failure to do so will result in the internal
temperature of the case and the MCs being charged to become extremely hot.
* We advise charging the MC after first powering o the light for optimal charging
speed. Attempting to charge the device while it is powered on will decrease its
charging speed.
The Aputure MC is compatible with the Qi wireless charging protocol. FIrst
ensure that the charging case is plugged into a compatible power source, then
flip the power switch to the ON position. MCs can then be wirelessly charged by
placing them on each wireless charging pad. If an MC is detected and is
charging, the charging pad's corresponding status LED will appear red. If the
MC's battery is full, the status LED will appear green.
When powering the MC 12-Light Charging Case with a D-Tap Battery, first
ensure that your battery is capable of delivering enough wattage to power the
charging case. With all wireless charging pads and USB ports active, the
charging case and draw up to 150W.
Metal Surface
6
55
Aputure Imaging Industries Co., Ltd.
Add: F/3, Building 21, Longjun industrial estate,
HePing West Road, Shenzhen, Guangdong
E-MAIL: cs@aputure.com
Sales Contact: (86)0755-83285569-613
Aputure Imaging Industries Co., Ltd. warrants the original consumer purchaser
from defects in material and workmanship for a period of one (1) year after the
date of purchase. For more details of warranty visit www.aputure.com
Serial No.
Item Name
Purchase Date
Buyer Name
Buyer Phone
Buyer Add
Franchiser Seal
Add F/3, Building 21, Longjun Industrial Estate, Heping West Road, Shenzhen, Guangdong:
Aputure Imaging Industries Co.,Ltd.
Inspection: Qualified
Intended Use
Intended use of the MC 12-Light Production Kit includes:
The user has read the instructions of this manual.
The user is using the products within the operating conditions and
limitations described in this product manual.
“Improper use” means using the products other than as described in
these instructions or under operating conditions which differ from those
described herein.
MC 12-Light Production Kit
Coldshoe Ball head
(4 pcs)
+3/8” to 1/4” screw nut
(4 pcs)
+
2). Type-C charging
* The MC supports quick charging via USB-C PD protocol.
*
Charging is slow when the light is powered on. Turn the light off for optimal charging.
* The MC on-screen battery indicator will flash when the battery level is too low.
As the light is charging, the on-screen battery level indicator will animate
to show the battery's status. After the battery is fully charged, the battery
level indicator will be displayed as full.
* The MC supports 5V/2A charging via power brick or power bank.
Specifications
* These are average results , the specific lux values may vary slightly between each
lighting fixture.
Color Temperature 3200-6500K
CRI 96+
TLCI 97+
Illuminance Distance
Maximum Brightness
Battery Type Lithium-polymer Battery
(3.7V 2600mAh)
Rated Output Power
Operating Temperature
5W
0 OC to 45 OC
Operating Battery Life >2hrs
Max Brightness Min Brightness
>15hrs
0.5M 1M0.3M
1100 lux 400 lux 100 lux
Battery Recharge Time
~1.5 hours via USB PD
~2 hours via USB DC 5V 2A/
~3.5 hours via wireless charging
Dimension 93x61x17mm/3.66x2.40x0.67in
MC
AC Power Supply
Operating Current
Power Consumption
Battery Requirement
Max Power Output
Max Wireless Charging Power Output
AC 100V~240V 50/60Hz
<2A
180W maximum
DC 12V~16.8V ≥15A
150W
12x10W
Dimension 436.7x383.8x134.9mm/17.19x15.11x5.31in
MC 12-Light Wireless Charging Case
You can download the Sidus Link app from the iOS App Store or Google
Play Store for enhancing the functionality of the light. Please visit
sidus.link/app/help for more details regarding how to use the app to
control your Aputure lights.
Sidus.link/app/help
AC 100V-240V
~
~
AC 100V-240V
~
~
9
8
7
10
7
11
12
13
14
15

Produktspecifikationer

Varumärke: Aputure
Kategori: Inte kategoriserad
Modell: MC 12-Light Production Kit

Behöver du hjälp?

Om du behöver hjälp med Aputure MC 12-Light Production Kit ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Aputure Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer