Aquatica Water Wizard Bruksanvisning

Aquatica Lättnad Water Wizard

Läs nedan 📖 manual på svenska för Aquatica Water Wizard (5 sidor) i kategorin Lättnad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

WATER WIZARD

Technical Lighting Control

WATERPROOF

HOUSING FOR

Pocket Wizard Plus III

USER MANUAL

3025 De Baene, Montreal, Quebec, Canada, H4S 1K8

info@aquatica.ca www.aquatica.ca

Tel.: -737-9481514

Foreword

Technical Lighting Control would like to thank you for acquiring the Water Wizard housing for your Pocket Wizard Plus III

transceiver. Technical Lighting Control is part of a group, along with Aquatica and Amphibico, of afliated companies that

dedicates themselves in the underwater imaging enthusiast the best instrument for their passion. The products are

developed by and for demanding professional in this eld.

With regular maintenance, your Water Wizard housing will gives you years of faithful service, before using it, we

recommend that you make yourself familiar with the Pocket Wizard® Plus III transceiver and take a moment to read this

owner manual.

Instruction:

First unscrew the four hexagonal screws that close’s the front cover, remove this cover and place somewhere clean and

safe.

Plug in the mini phone jack into the transceiver; position it so that the dowel pin ts properly in the mounting hole in the

back of the transceiver.

Inspect and clean and lubricate the O-ring and close back the cover, tighten down the screws, making sure not to over

torque them.

Remove the bulkhead cap, inspect for cleanliness, lubricate the sync cord and/or extension cord O-ring and install in the

Water Wizard bulkhead connector, connect the end of the sync cord to the camera housing or the underwater strobe(s).

Most common sync cords used are:

Ikelite to Nikonos single sync cord # 4104.31: For connecting the Water Wizard housing to most housing equipped with a

Nikonos type of strobe connector

Ikelite to Ikelite single cord # 4103.51: For connecting the Water Wizard housing to one Ikelite strobe or to any housing

equipped with an Ikelite bulkhead.

Ikelite to Ikelite double cord # 4103.52: For connecting the Water Wizard housing to two Ikelite strobes.

Ikelite to Sea & Sea single cord # 4118.1: For connecting the Water Wizard housing to one Sea & Sea or Inon strobe.

Ikelite to Sea & Sea double cord # 4118.2: For connecting the Water Wizard housing to two Sea & Sea or Inon strobes.

Additional extensions are also available:

Ikelite 4.5m/15ft extension cord # 4102.15 Ikelite 0.9/3ft extension cord # 4102.03

Check for additional sync cords combination. www.ikelite.com

1) ON/OFF BUTTON

2) TEST / TRIGGER BUTTON

3) CLOSING FASTENER (4x)

4) HEXAGONAL KEY

5) CONNECTING BULKHEAD

6) BULKHEAD CAP

7) 1/4-20" THREADED MOUNTING HOLE

Produktspecifikationer

Varumärke:	Aquatica
Kategori:	Lättnad
Modell:	Water Wizard
Färg på produkten:	Zwart
Vikt:	1120 g
Bredd:	112.8 mm
Djup:	122.3 mm
Höjd:	166.5 mm
Förpackningens vikt:	1360 g
Förpackningens bredd:	130 mm
Djuppackning:	163 mm
Förpackningshöjd:	234 mm
Snäll:	Luchtkoeler
Ljudnivå (hög hastighet:	35 dB
Maximalt luftflöde:	53.38 cfm
Antal fans:	2 ventilator(en)
Färg på belysningen:	Blue, Green, Red
Spännande:	12 V
Rotationshastighet (max):	1800 RPM
Inklusive skruvar:	Ja
Rotationshastighet (min):	600 RPM
Belysning LED:	Ja
Lämplig plats:	Processor
Strömförbrukning (typiskt):	4.44 W
Harmoniserad systemkod (HS):	84733080
Ventilator diameter:	120 mm
Nominell nätspänning:	0.3 A
Ljuslägen:	Breathing, Color cycle, Mirage, Stars, Static
Antal fläktblad:	9
Maximalt lufttryck:	1.65 mmH2O
Stöd för pulsbreddsmodulering:	Ja
Finmaterial:	Aluminium
Antal värmerör:	6
Matventilator (bxdxh):	120 x 120 x 25 mm
Värmerörs diameter:	6 mm
Kylflänsens mått (B x D x H):	60 x 116 x 158 mm
Kylfläns vikt:	616 g
Mean Time To Failure (MTTF):	40000 uur
Säkerhetsströmstyrka:	0.37 Ah