ART SCL2 Bruksanvisning

ART Processor SCL2

Läs nedan 📖 manual på svenska för ART SCL2 (15 sidor) i kategorin Processor. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/15
SCL2
Dual/ Stereo Compressor/ Expander/ Gate/ Limiter
USER’S GUIDE
1
2
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST
This symbol, wherever it appears, This symbol, wherever it appears, alerts
alerts you to the presence of uninsulated you to important operating and maintenance
dangerous voltage inside the enclosure. Voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment.
Follow the operating instructions printed in this user guide.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Only connect the unit to mains power of the type marked on the rear panel. The power source must provide a good
ground connection.
Power cord:
Use the power cord with sealed mains plug appropriate for your local mains supply as provided with the equipment. If the
provided plug does not fit into your outlet consult your service agent. Route the power cord so that it is not likely to be
walked on, stretched or pinched by items placed upon or against.
Grounding:
Do not defeat the grounding and polarization means of the power cord plug. Do not remove or tamper with the ground
connection on the power cord.
Ventilation:
Do not obstruct the ventilation slots or position the unit where the air required for ventilation is impeded. If the unit is to be
operated in a rack, case or other furniture, ensure that it is constructed to allow adequate ventilation.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet conditions. Do
not place a container of liquid on it, which may spill into any openings.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard. Locate the unit
away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and
smoke, especially that associated with smoke machines.
Handling:
To prevent damage to the controls and cosmetics avoid rough handling and excessive vibration. Protect the controls from
damage during transit. Use adequate padding if you need to ship the unit. To avoid injury to yourself or damage to the
equipment take care when lifting, moving or carrying the unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen
into opening, or the power cord or plug becomes damaged during a lightning storm or if smoke odor or noise is noted.
Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user guide.

Produktspecifikationer

Varumärke: ART
Kategori: Processor
Modell: SCL2
Färg på produkten: Zwart
Vikt: 19950 g
Bredd: 730 mm
Djup: 700 mm
Höjd (min): 1205 mm
Höjd (max): 1280 mm
Antalet hjul: 5 wiel(en)
Ramfärg: Zwart
siffra: 1
Färg botten: Chroom
Hjulhjul: Ja
Justerbart ryggstöd: Ja
Nackstöd: Ja
Typ av stol: Gecapitonneerde zitting
Färg på sätet: Zwart
Typ av ryggstöd: Netrugleuning
Ryggstödets färg: Zwart
Armstöd: Ja
Justerbart armstöd: Ja
Armstödsjusteringstyp: 3D-armleuning
Justerbart nackstöd: Ja
Sitthöjd (max): - mm
Sitthöjd (min): - mm
Sitsmaterial: Stof/Weefsel

Behöver du hjälp?

Om du behöver hjälp med ART SCL2 ställ en fråga nedan och andra användare kommer att svara dig




Processor ART Manualer

Processor Manualer

Nyaste Processor Manualer