Artusi CAEH1 Bruksanvisning

Artusi Inte kategoriserad CAEH1

Läs nedan 📖 manual på svenska för Artusi CAEH1 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Description of the hot plates
Use
Directions for Use
Small Plate
Large Plate
Knob
Indicator Light
Red Spot
Large Plate
3 Cooking soups ,larger dishes
1 MIN.Warming up
2 Stewing vegetables,slow cooking
4 Slow frying
5-6 Grilling meat,fish
0 Switch off
Technical Data
Model Power Supply Electric Plate Power(W) Size
Built-in Hole Size
1000
AC 220-240 V
50Hz 580X78 557(L)X477(W)
145mm
Small Plate
500X
2000
(Red) 185mm
1500
185mm
0
1
2
3
4
5
6
Good Bad Bad Bad Bad Bad Bad
(recessed base) (convex base) (undersize) (oversize) (moisture on hotplate) (no Pan)
Cod:0070302043
IMPORTANT NOTICE
Please register your warranty card and return the enclosed certificate of guarantee, duly
dated and signed.A duplicate data label and wiring diagram are contained in this booklet.
Please keep these in a safe place.The manufacturer shall not be held responsible for any
inaccuracies in this instruction booklet due to printing errors and the designs in the diagrams
are purely indicative.The manufacturer also reserves the right to make any modifications to
the products as may be considered necessary or useful, without jeopardising the main
function or safety features of the products.
1. Do not touch the appliance with wet hands.
2. Do not operate the appliance when barefoot.
3. Do not allow children to operate the hob.
4. Please disconnect the power supply before any maintenance and cleaning.
5. When the hob is working, the temperature of the hob top increases. Please do not touch and
keep children away from it.
6. A steam cleaner must not be used to clean the appliance.
7. The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
8. The power supply should use H05VV-F.
9. The hob must be built into a heat-resistant cabinet. Smoke may be visible when first used – this
is normal. Please leave on for a few minutes to burn off excess oils used during manufacture.
Operation
The electric plates can either be standard or rapid type. The latter feature a red spot in the centre.
According to requirements, the plates can be adjusted by turning the knobs either clockwise or
anti-clockwise to any of the 6 positions besides the 0 position (Off). The higher the number, the
greater the output of heat (see table below). When using rapid plates, a thermostat automatically
reduces the power when the selected temperature is reached and the plate cycles intermittently to
keep a constant cooking temperature. The indicator light is a signal that the electric plates are
switched on.
The level of heat can be adjusted gradually by turning the appropriate knob to the right or left.
The indicator light can be found on the control panel – please see above diagrams.
An appropriately sized pan saves energy.
The correct pan should have a thick, flat base, with a diameter equal to the plate diameter,
so that heat is transferred more efficiently.
Advice on the Use of Electric Plates
Never leave the plates on without pans on them, or with empty pans and never use the
plates to heat crockery. Switch on the plates after having set the pans on them.
Once switched off, the plates remain warm for a while, do not touch.
Switch off the heating plate before removing the pans.
Pans
- Use pans with flat bottoms. Uneven or thin bottoms will waste energy and are slow to
cook.
- Smaller pans will waste energy.
- Do not use oversized pans. More than 50mm overhang can cause components to
overheat and cause fine cracks in enamel or even damage heating elements.
- Use only dry pans. Do not place wet or condensated items (eg. lids) on the hotplates.
Use
- Do not use pots and pans that are unsteady and likely to rock or overturn.
- Do not operate the hob for an extended time without a pan on the hotplate.
CAEH1
1
23
Please read the instruction manual carefully before operating your new hob.
Dear Owner: Thank you for purchasing our cooktop which is designed to give you many years of
cooking pleasure. Before using your new appliance please read the user's manual carefully and
keep it in a safe place for future reference.
THIS APPLIANCE MUST BE INSTALLED ONLY BY A QUALIFIED PERSON IN
INSTRUCTIONS PROVIDED. THE MANUFACTURER DECLINE ALL RESPONSIBILITY FOR
IMPROPER INSTALLATION WHICH MAY HARM PERSONS AND ANIMALS OR CAUSE
DAMAGE TO PROPERTY. THE APPLIANCE MUST BE USED ONLY FOR THE PURPOSE
FOR WHICH IT WAS EXPRESSLY DESIGNED. ANY OTHER USE (e.g. HEATING ROOMS) IS
CONSIDERED TO BE IMPROPER AND MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR DAMAGE RESULTING FROM IMPROPER AND IRRESPONSIBLE USE.
Danger of fire: Do not store items on the cooking surfaces.
CAUTION: The cooking process has to be supervised. A short term
cooking process has to be supervised continuously.
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in a fire.NEVER try to extinguish a fire
with water, but switch off the appliance and then cover flame e.g.
with a lid or a fire blanket.
SAFETY WARNING
1. Please check the built-in electric hob's integrity after opening the package. If there are any
problems please refer to the supplier.
2. Do not throw the package materials (plastic bag, foam, nails, package etc) in a place where
children can easily access. Please dispose of packaging in an environmentally friendly
manner.
3. Do not change the wiring under any circumstances.
4. Dispose of the appliance in an environmentally friendly manner.
5. If the supply cord is damaged,it must be replaced by the manufacturer its service agent or
similarly qualified persons in order to avoid a hazard.
6. The appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction.children being supervised not to play with the appliance.
7. Do not stare at the hob elements when the appliance is working.
8. Accessible parts may become hot during use. To avoid burns young children should be
kept away
9. WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of
electric shock, for hob surfaces of glass-ceramic or similar material which protect live parts
10.Shall state a steam cleaner is not be used.
11.Metallic objects such as knives, forks, spoons and lids should not be placed on the hob
surface since they can get hot.
12. CAUTION:The surface temperature exceeds 95°C.To avoid a hazard,under bench access
must be restricted.Refer to the installation instructions.
13. WARNING:The appliance and its accessible parts become hot during use. Care should be
taken to avoid touching heating elements.Children less than 8 years of age shall be kept
away unless continuously supervised.
14.The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
15.WARNING: Use only hob guards designed by the manufacturer of the cooking appliance
or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob
guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
V20190830
The connection cable must be secured in a strain-Relief clamp.
Caution!
Remember to connect the safety circuit to the connection box terminal marked with
cut off in case of emergency. The distance between the working
switch must be at least 3 mm. Before connecting the cooker to the power supply it is
important to read the information on the data plate and the connection diagram.
The manufacturer will not accept any responsibility if the applicable standards are
not respected.
The electricity supply for the hob must have a safety switch which enables the power to be
contacts of the safety
This appliance must be installed only by authorised personnel and in accordance with
Australia and New Zealand regulations. The surfaces must be capable of sustaining
temperatures of 80°C. All laminates, fixing adhesive and surface materials should be
certified suitable for this temperature.
According to the diagrams below, cut a hole in the worktop and insert the hob. The hob can
be fitted to any worktop with a thickness of 40mm or 50mm.
Please note the following:
1. Fire resistant material (eg. ceramic tiles) is required to a height of 450mm above the hob
top and wall or vertical structures are not permitted within 200mm of the hotplates.
2. No overhang or cooker hood is permitted within 600mm distance in height above the
hotplates.
3. Leave at least 50mm clearance between the underside of the appliance and any
combustible area.
4.Never leave packaging components (plastic bags, polystyrene etc) within reach of
children.
INSERTING AND FIXING THE HOB
Before inserting the hob into the work surface, place the adhesive seal (a) around
the underside edge of the hob. It is important to fix this seal evenly without gaps or
overlapping
to prevent liquids from seeping underneath the hob. Please follow the below instructions:
1) Place the seal around the bottom edge of the hob as shown in the illustration below.
2) Place the hob in the installation opening and push it down so that the hob is resting
firmly
on the worktop.
3) Secure the hob in position using the fixing brackets supplied.
Screw one end of the bracket into the pre-drilled holes in the underside of the hob.
The other end of the bracket should be located underneath the worktop to secure the hob
in position.
600-750
45
67
Recommended installation
Board
580
557
477
500
78
43
Ventilation slot ≥ 30mm
50mm MIN.
• If the cable is damaged or to be replaced, the operation must be carried out the by
after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must
be installed with a minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and that it
is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.
a
Worktop
Fixing bracket
Screw
a
TROUBLESHOOTING
PROBLEM CHECKLIST
Hob does not work Check the wiring connection
Check the fuse and voltage
Smoke when hob is on
•
This is normal on first use
•
Damaged wire •Contact service provider and do not attempt
to use
•
•
Clean area around hotplates
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
wire must be connected to the E terminal.
Recommended
type of
connection
lead
N
L
E
N
L
CLEANING
The appliance must be turned off at the mains before carrying out any maintenance. Make
sure the hob plates are not hot prior to any cleaning or maintenance. Any abrasive cleaners
(such as Cif) will scratch the surface and could erase the control panel markings. Stainless
steel can be effectively cleaned by simply using a dilute solution of water and washing up
liquid and drying to a shine with a clean cloth. Over time with use, the stainless steel surface
may discolour – this is normal and does not constitute a fault with this appliance. Proprietary
stainless steel cleaners are available.
HOTPLATE CARE
The finish of the cast iron hotplates is designed to be durable in use. The following tips
should be observed to get the best from your hob:
1. Do not use decorative covers as these can cause damage to the surface and lead to rust.
2. Use a special hotplate surface cleaner to protect and restore the surface of the hotplates.
3. Do not use soap and water on the hotplates. Wipe up spills and splashes immediately.
4. Never operate the hob without a pan, unless it is for a few seconds (as below).
5. Deposits of fat can be burned off by turning the hotplate on for a few seconds. The fat will
brush off when the appliance has cooled down.
TECHNICAL INFORMATION FOR INSTALLATION (Qualified Personnel Only)
Electrical Connection
Appliances with three-pole cables are set up for operation with alternating current at the
voltage and frequency indicated on the rating plate. Please ensure you have studied and are
familiar with the connection wiring diagram provided prior to installation. Note that the earth
conductor is yellow/green. The connection to the electricity supply must be made by a
qualified person and following the regulations in force. When the appliance is to be installed
above a built-in oven, the two appliances must be connected separately.
The supply cable must be so positioned that no point can reach a temperature 50° C higher
than the ambient temperature. Also check that the supply system has an effective earth
connection and corresponds to the standards in force and that the plug (or omnipolar switch)
can be reached easily when the appliance is installed.
Fitting Guidelines
The voltage rating of the hob heating elements is 220-240V. Adapting the hob to operate
with one-phase current is possible by appropriate bridging in the connection box according to
the connection diagram below. The connection diagram is also shown on the cover of the
connection box. Remember that the connection wire should match the connection type and
the power rating of the hob.
Power configuration mode
Minimum cable size (mm2)2.5
CAEH1
By ensuring that this appliance is disposed of correctly, you will help prevent any possible harm to
The environment and to human health which might otherwise be caused if disposed of in the
wrong way.
The symbol on the product indicates that it may not be treated as normal household waste.
It should be taken to a collection point for the recycling of electrical and electronic goods.
For further information regarding the treatment, recovery and recycling of this product, please contact
your local council, household waste disposal service or the shop where you purchased the product.

Produktspecifikationer

Varumärke: Artusi
Kategori: Inte kategoriserad
Modell: CAEH1

Behöver du hjälp?

Om du behöver hjälp med Artusi CAEH1 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Artusi Manualer

Artusi

Artusi PAO600 Bruksanvisning

22 September 2024
Artusi

Artusi PAO610 Bruksanvisning

22 September 2024
Artusi

Artusi AGS792W Bruksanvisning

21 September 2024
Artusi

Artusi AFG915BKP Bruksanvisning

21 September 2024
Artusi

Artusi CACC60 Bruksanvisning

19 September 2024
Artusi

Artusi CACC70 Bruksanvisning

19 September 2024
Artusi

Artusi CAEH1 Bruksanvisning

19 September 2024
Artusi

Artusi CACC1 Bruksanvisning

19 September 2024
Artusi

Artusi CACC604 Bruksanvisning

19 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024