Ashly FR-16 Bruksanvisning

Läs nedan 📖 manual på svenska för Ashly FR-16 (16 sidor) i kategorin Processor. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Operating Manual
FR-8 and FR-16 Programmable Fader Control
Overview
The FR-8 and FR-16 are Ethernet-based programmable fader remote controllers for all Ashly
networked products with DSP capabilities. Each fader and it’s push button LED can be programmed
to adjust signal level, select input source, or mute the signal. The FR remotes are ideal for networked
sound systems in meeting rooms, houses of worship, courtrooms, or other applications where simple but
programmable real-time level control is required.
ASHLY AUDIO INC.
847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010
Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com
2014 by Ashly Audio Corporation. All rights reserved worldwide.
All Trademarks referred to herein are the property of their respective owners.
Features
8 or 16 Assignable Faders with Master
Push Button Switches with LED
Mute/Unmute per Fader
A/B Source Select per Fader (programmable)
Two Signal Level Indicators per Fader
User Defined Signal Level LED Thresholds
Assignable Fader Scaling
Front Panel Lockout
Communication Failure Indicator
Automatic IP Addressing
User Defined Label Inserts
Wall Box, Rack, or Panel Cut-Out Mounting
Requirements
Ethernet Network
Class 1 IEEE 802.3af Power Over Ethernet
Ashly Networkable Device with DSP
PC Running
Microsoft® Windows XP or
higher, 32 & 64 bit
Proteane Software v5.11 or Higher
Compatible Ashly Devices
ne24.24M
NE Two-Channel Amplifiers (with DSP)
NE Multi-Channel Amplifiers (with DSP)
NE4400, 4800, and 8800 DSP Processors
Pema Amplifiers
nXp Amplifiers
2
Front Panel
1) Push Button LED Label Window - Insert
label made from Ashly template doc (page 12)
2) Push Button LED - Used to switch fader
Mute or fader A/B Source Select. LED also
indicates signal level or fader status
3) Channel Fader - Adjusts level of targeted
DSP gain stage or output mixer source
4) Channel Fader Label Window - Insert
label made from Ashly template doc (page 12)
5) Power LED - Shows device is powered
6) Master Fader - Adjusts level of all
assigned channel faders
Rear Panel
1) RJ-45 Jack - Connects to Ethernet
Network with PoE or PoE injector
2) Link LED - Shows network is connected
3) Data LED - Shows Data is transferring
4) Lockout Connector - Use with any switch
to disable all front panel controls when closed
5) Serial Number and MAC Address - Used
for warranty or ash programming
FR Features (FR-8 not shown)
On Startup:
1. When the FR-8 or FR-16 is first connected or powered on, it attempts to communicate with
all devices it has been programmed to control, if any.
2. Once communication with the targeted device is established, it waits to transmit any fader or
switch position data until a control is physically changed by the user. At that point only the data for
that control is sent. This feature prevents sudden and unexpected changes when reconnecting or re-
starting the FR remote control, as well as when a new preset is recalled to the host device.
PLEASE NOTE: When in doubt, make sure all faders are either in the correct position or fully
down before reconnecting
3
Typical Application

Produktspecifikationer

Varumärke: Ashly
Kategori: Processor
Modell: FR-16

Behöver du hjälp?

Om du behöver hjälp med Ashly FR-16 ställ en fråga nedan och andra användare kommer att svara dig




Processor Ashly Manualer

Ashly

Ashly ne4400 Bruksanvisning

25 September 2024
Ashly

Ashly ne8800 Bruksanvisning

23 September 2024
Ashly

Ashly ne4800 Bruksanvisning

23 September 2024
Ashly

Ashly ne24.24M Bruksanvisning

22 September 2024
Ashly

Ashly FR-16 Bruksanvisning

22 September 2024
Ashly

Ashly FR-8 Bruksanvisning

22 September 2024

Processor Manualer

Nyaste Processor Manualer