AstrHori AH-M1 Bruksanvisning

Läs nedan 📖 manual på svenska för AstrHori AH-M1 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
示屏)
①开关机单击按键开机。休眠约 小时后自动关机。无操作 后进入低功耗休眠状态, 单击按键3 25s
即可唤醒
②ISO调节双击按键, 在第二次按下按键时长按约 切换到ISO调节, 最小可调节 档. 通过拨盘0.5s 1/3
设置ISO, 单击按键返会 模式设置。A/T
③A/T模式切换: A T A双击按键在" "模式 和" "模 切换. " "表示光圈优先(Aperture-priori-
ty)模式, 通过拨盘设置光圈值,最小可调节 档,测光表计算出推荐的快门时间." "表示快门优先1/3 T
(shutterTime-priority)模式, 通过拨盘设置快门时间, 最小可调节 , 测光表计算出推荐的光1/3
圈值。
④实时测光: 单击按键测量环境光并计算推荐的快门时间或光圈值, 从休眠状态唤醒的同时也会进
行一次测量.长按按键约 开关实时测光, 实时测光开启时右下实时测光图标亮起 , 实时测量0.5s
环境光自动计算刷新推荐值, 单击按键锁定推荐值 , 右下锁定图标亮起 , 任意操作可以解除锁5s
定。
曝光补偿设置: 双击按键在第二次按下按键时长按约 切换到曝光补偿设置。通过拨盘设置曝3.5s
光补偿改变测光表计算的推荐值最小可调节 EV,正值使照片变亮 负值使照片变暗单击按键1/3
返回 模式设置。A/T
测光表使用说明手册

材质 金属
测光参数
电池类型
约30°平均测光单次测光时间≤0.5s.
内置120毫安时锂电池
曝光补偿范围 +3 EV ~ -3 EV
测光模式 均测光
约48g
重量
38*26*14mm尺寸
0.66" OLED显示屏
续航/充电 连续测光约为12小时。充电为USB--Type-C接口,使用5V电源充电,
约40分钟充满(以电脑的USB接口为例)
测光范围 (ISO100)EV1 ~ EV22
光圈调节范围 F1 ~ F32
快门时间调节范围 32s ~ 1/8000s
调节范围 ISO6400 ~ ISO5
使用前请仔细阅读使用说明手册

产品参数 调节盘 操作说明 产品保修卡
0.66" OLED显示屏
冷靴座
Type-C充电座
调节盘
测光孔/防反射台阶
按键:开关/切换
(正面) (背面)
感谢您购买本产品,此卡为您的保修凭证。
保修:两年
保修说明
保修卡适用您购买的本公司系列产品。
1. 凡保修期内,由本产品自身引起的故障,请与本公司售后服务联系。
2. 保修时我们将使用您的保修卡信息完整填写
3. 以下情况,属于有偿保修范围:
4. 以下情况不在保修范围:
假冒及仿制的本公司产品
非授权渠道购买
人为因素造成的设备故障。
因使用环境不符合本产品要求造成的故障。
因不可抗力造成的产品损坏
无产品序保修卡或产品序号及标贴模糊不清、破损、无法辨识。
已过保修期。
产品名称:
订单编号:
购买日期:
话:
通讯地址:
曝光值/曝光补偿 (EV/EC)
锁定图标
快门时间
光圈
电量显示
实时测光
ISO
光圈优先/快门优先A/T)
   
" 





(Display Screen)
 
Thank you for purchasing this product. This card is your warranty certificate.

Warranty:
Warranty card is applicable to all products you order from our company.
1、Any problems caused by the product itself, please contact our after-sales service within
warranty period.
2、We will use your warranty card information, please complete.
3、Under these following situations, payment is needed for your warranty:
4、








①Switch on/off: Click the button to start the machine; Automatic shutdown after hibernation for
about hours.Enter the low-power sleep state after no operation for or , and click the button 3 10s 25s
to wake up.
②ISO adjustment: Double-click the key, and press the key for about for the second time to 0.5s
switch to ISO adjustment. The minimum adjustment can be gear Set ISO through dial, and click 1/3
to return to mode setting.A/T
③A/T mode switching: Double-click the button to switch between "A" mode and " " mode "T A"
means Aperture-priority mode. Set the aperture value through the dial. The minimum can be
adjusted by gear. The light meter calculates the recommended shutter time " " means shutter 1/3 T
time-priority mode. The shutter time can be set by dial. The minimum can be adjusted by gear. 1/3
The light meter calculates the recommended aperture value.
④Real-time photometry: Click the button to measure the ambient light and calculate the
recommended shutter time or aperture value. When waking up from sleep, a measurement will also
be performed.Press and hold the button for about to switch on real-time light metering. When 0.5s
real-time light metering is turned on, the lower right real-time light metering icon lights up .
Real-time measurement of ambient light automatically calculates and refreshes the recommended
value. Click the button to lock the recommended value for , and the lower right lock icon lights 5s
up .Any operation can unlock the lock.
⑤Exposure compensation Settings: Double-click the key and press the key for about for the 3.5s
second time to switch to the exposure compensation setting Set the exposure compensation by dial
to change the recommended value calculated by the light meter. The minimum value can be
adjusted by EV. A positive value makes the picture brighter and a negative value makes the 1/3
picture darker. Click the key to return to mode setting.A/T
Exposure Value&
Exposure Compensation
(EV/EC)
Lock icon
Shutter time
Aperture
Power display
Real-time photometry
ISO
Aperture Priority&
Shutter Priority(A/T)
地址 (Add) : 深圳市龙岗区坂田街道坂田社区坂雪岗大道3012号三层83013室





Material Metal
Battery Type Built-in 120 mAh lithium Battery
ISO Range
Exposure compensation Range
ISO6400 ~ ISO5
+3 EV ~ -3 EV
Metering Mode Average Metering
About 48g
Weight
38*26*14mmSize
0.66" OLEDDisplay Screen
Endurance/Charge
Continuous metering for about 12 hours。The USB - Type- C interface is used for charging,
and 5V power supply is used for charging, and it will be fully charged in about 40 minutes
(take the USB interface of the computer as an example)。
Metering Parameters
About 30° average metering, single metering time ≤ 0.5s.
Metering range (ISO100)EV1 ~ EV22
Aperture Range F1 ~ F32
Shutter Speeds Range
32s ~ 1/8000s
Room 83013, 3rd Floor, No. 3012 Banxue Gang Avenue, Bantian Community,
Bantian Street, Longgang District, Shenzhen

Produktspecifikationer

Varumärke: AstrHori
Kategori: Inte kategoriserad
Modell: AH-M1

Behöver du hjälp?

Om du behöver hjälp med AstrHori AH-M1 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad AstrHori Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer