ATen CS1822 Bruksanvisning

ATen Växla CS1822

Läs nedan 📖 manual på svenska för ATen CS1822 (17 sidor) i kategorin Växla. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/17
CS1822 / CS1824
2/4-Port USB3.0 4K HDMI KVMP™ Switch
RS-232 Commands
User Manual
www.aten.com
CS1822 / CS4824 RS-232 Commands
2
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
Warning: Operation of this equipment in a residential environment could
cause radio interference.
KCC Statement
RoHS
This product is RoHS compliant
.
CS1822 / CS4824 RS-232 Commands
3
RS-232 Operation
Overview
The CS1822 / CS1824’s built-in bi-directional RS-232 serial interface allows
system control through a high-end controller or PC. RS-232 serial operations
in a CS1822 / CS1824 installation are managed via HyperTerminal sessions on
systems that are running Windows. In order to use this feature to send
commands to the CS1822 / CS1824, you must first download and install a
HyperTerminal application. For detailed instructions and information about
each of the commands provided in this manual, please refer to the CS1822 /
CS1824 user manual.
Setup
Install a HyperTerminal application on a computer that is not part of the
installation, which will be used to control the switch via the RS-232
connection. HyperTerminal applications can be download from the Internet,
and many operating systems are embedded with HyperTerminal applications.
Hardware Connection
Use a RJ-11 to DB-9 serial adapter (LIN5-04A2-J11G) to connect a
computer’s serial port to the serial port on the CS1822 / CS1824, as shown
below:
Note: The unit used in the diagram below is CS1824, the procedure for
connecting CS1822 is identical with fewer KVM ports.
RJ-11 to DB-9 Adapter

Produktspecifikationer

Varumärke: ATen
Kategori: Växla
Modell: CS1822

Behöver du hjälp?

Om du behöver hjälp med ATen CS1822 ställ en fråga nedan och andra användare kommer att svara dig




Växla ATen Manualer

ATen

ATen CS22U Bruksanvisning

29 December 2024
ATen

ATen CE610A Bruksanvisning

10 September 2024
ATen

ATen VM3250 Bruksanvisning

10 September 2024
ATen

ATen KL1508AIN Bruksanvisning

10 September 2024
ATen

ATen VM0808HB Bruksanvisning

10 September 2024
ATen

ATen KE6940R Bruksanvisning

10 September 2024
ATen

ATen CN8600 Bruksanvisning

10 September 2024
ATen

ATen CS1644A Bruksanvisning

9 September 2024
ATen

ATen CS1922M Bruksanvisning

9 September 2024

Växla Manualer

Nyaste Växla Manualer