Atlantic LCR2 Bruksanvisning

Atlantic högtalare LCR2

Läs nedan 📖 manual på svenska för Atlantic LCR2 (4 sidor) i kategorin högtalare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
LCR2
Compact High Performance Loudspeaker
Specications for the L
Specications for the L
Specications for the L
Specications for the LSpecications for the LC
C
C
CCR2
R2
R2
R2R2
Type Sealed-box, 2-way
Drivers: Woofers (1) 31/2˝ CPP
Tweeter (1) 3/4˝ silk dome tweeter
Frequency Response 115Hz - 20kHz (± 3dB)
Nominal Impedance 6 ohms
Crossover Frequency 3.5kHz
Sensitivity 87dB
Recommended Amplier Power 10-125 Watts
Dimensions 43/4˝ x 8˝ x 5˝ (120mm x 204mm x 127mm) w/grille
Weight (each, unpacked) 3.22 lbs; 1.4kg
Specications are those in effect at the time of printing. Atlantic Technology reserves the right to change specications or
appearance at any time without notice.
Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.
DTS is a registered trademark of DTS Inc.
343 Vanderbilt Avenue Norwood, MA 02062
(781) 762-6300
www.atlantictechnology.com
LCR2
Compact High Performance
Loudspeaker
Thank you for choosing Atlantic Technology home
theater products. Your new speaker system is precision
craed to give you years of enjoyable, trouble free serv-
ice. is manual covers the Atlantic Technology LCR2.
e LCR2 is a versatile loudspeaker that can be used in
any position in a home theater such as a leor right
channel or a center channel or even a surround channel.
Each LCR2 consists of a low resonance MDF cabinet,
3.5˝ CPP driver, 3/4˝ silk dome tweeter and high quality
crossover components. e LCR2 is designed for use
with all surround formats such as Dolby Digital, DTS or
Dolby Atmos.
P
P
P
PPositioning the L
ositioning the L
ositioning the L
ositioning the Lositioning the LCR2 as a F
CR2 as a F
CR2 as a F
CR2 as a FCR2 as a Front,
ront,
ront,
ront,ront,
Ce
Ce
Ce
CeCenter or Surround Ch
nter or Surround Ch
nter or Surround Ch
nter or Surround Chnter or Surround Channel
annel
annel
annelannel Speake
Speake
Speake
Speake Speaker
r
r
rr
We recommend placing the LCR2 with the tweeters
facing upward. Set the receiver bass management or
speaker size to “small” and the crossover to 100Hz.
Alternatively, if you have limited room you can use the
LCR2 horizontal positioned just like a center channel.
We have included four 4mm rubber feet in each accessory
bag to mount to the bottom of the cabinet depending on
how you choose to place the speaker.
Con
Con
Con
ConConnec
nec
nec
necnecting
ting
ting
ting ting Y
Y
Y
YYour Sy
our Sy
our Sy
our Syour System
stem
stem
stemstem
We recommend that you connect your LCR2 speaker
systems with high quality dual conductor stranded wire
of 18 gauge or larger, for lengths up to 25 feet. Use 16
gauge dual conductor or larger for longer runs of wire.
Contact your local audio/video specialist for specic
cable recommendations and further information for
special circumstances.
Warning: To prevent risk of electrical shock or damage
to your equipment, always switch off the amplier or
receiver when making connections to the speaker.
You can connect your LCR2 speakers by using a variety
of audio connectors, or you can:
Strip about 1/2˝ (13mm) of insulation from the connect-
ing wires. Connect them to the appropriate push termi-
nal, being careful to observe polarity (positive to the red
terminal, negative to the black terminal).
Whether you are connecting a complete LCR2 system,
or adding a single speaker component to your present
system, the wiring should look like the diagram in Fig-
ure 2.
Figure 2: Typical wiring diagram for speakers in a home theater.
Figure 1: Gold plated spring posts. Accepts up to 14 gauge bare wire.
Warning: Before turning on the amplier, be certain that no
stray wire strands are touching across the two terminals as this
might damage your amplier.
Finally, check the polarity of your front speakers by listening to some music.
If the sound seems hollow, unusually spread out, or has weak bass, recheck
your connections for proper polarity. If necessary, reverse any out of phase
connections. Only one speaker wired out of phase is usually the culprit.
Pla
Pla
Pla
PlaPlace
ce
ce
cecemen
men
men
menment a
t a
t a
t at and
nd
nd
ndnd
Op
Op
Op
OpOpe
e
e
eeratio
ratio
ratio
ratioration
n
n
nn
Speaker/room interactions have a huge impact on the sound of the system.
Moving the speakers just a little bit can make a dramatic difference in what you
hear. e ultra-compact design of LCR2 provides you with maximum placement
exibility while creating a large, seamless, acoustically accurate soundeld for your
home theater or music system. e best placement of the speakers will vary from
room to room. Use the following placement guidelines and Figure 3 as a starting
point. But also feel free to experiment. In fact, it may be benecial to hook up the
speakers with some extra wire and to simply drape the wire across the oor before
installing the speakers permanently. is will allow you the opportunity to move
the speakers around easily so you can nd the best sonic and visual locations.
Typical arrangement for speakers in a home theater. For best results, place the sur-
round speakers within the shaded area. Note that the surround speakers are marked
Le and Right. It is important that the speakers be placed correctly for proper imaging.
M
M
M
MMoun
oun
oun
ounountin
tin
tin
tinting
g
g
gg
e LCR2 speakers can be mounted
in a variety of ways:
On speaker stands:
On speaker stands:
On speaker stands:
On speaker stands:On speaker stands:
We recommend speaker stands with
an approximate height of 29˝ above
the oor. Ideally the tweeter of the
speaker should be at ear level when
seated.
On the wall:
On the wall:
On the wall:
On the wall:On the wall:
To mount your speakers on a wall,
we have installed metal key-hole
brackets on the back of the LCR2
speakers. Be sure to use a strong
screw whose head and sha will t
within the keyhole opening and
slot. Also be sure to drive the screw well into a stud or use a mounting device (such
as a molly-bolt) that is capable of holding the weight of the speaker. Never simply
drive a nail or screw into a sheet rock or other wall materials. Always follow the
above guidelines for safe speaker mounting.
On a bookshelf
On a bookshelf
On a bookshelf
On a bookshelfOn a bookshelf:
:
:
::
Adhesive rubber feet are included.
Liste
Liste
Liste
ListeListening Levels
ning Levels
ning Levels
ning Levelsning Levels and
and
and
and and P
P
P
PPower
ower
ower
ower ower
Handli
Handli
Handli
HandliHandling
ng
ng
ng ng – IMP
– IMP
– IMP
– IMP– IMPORT
ORT
ORT
ORTORTA
A
A
AANT!
NT!
NT!
NT!NT!
e power recommendation for these speaker
components assumes that you will not operate
your amplier/receiver in a way that produces
distortion. Even rugged speakers like LCR2 can
be damaged by a moderately powered system
driven beyond its intended capacity. e harsh
amplier clipping that occurs in this situation will
cause damage to the speaker system. is type of
damage is easily identiable through examination
of the damaged speaker’s voice coil and is not cov-
ered by the warranty. e LCR2 will play very
loudly when provided with enough clean power
to do so. Again, consult your dealer or Atlantic
Technology for additional information.
Car
Car
Car
CarCare and F
e and F
e and F
e and Fe and Fe
e
e
eeeding
eding
eding
eding eding of
of
of
of of Y
Y
Y
YYour S
our S
our S
our Sour Speakers
peakers
peakers
peakerspeakers
Clean your speaker cabinets using a so cloth
moistened with a mild, non-abrasive glass cleaner
being careful not to wet the edges of the cabinet.
Also, be careful not to get any cleaning uids on
the driver cones or domes. It may be best to
dampen the cloth with the cleaner and then wipe
the speakers. Use a so cloth, but do not use any
paper products, because no matter how so they
may feel, they will scratch the nish. Aer care-
fully removing the grilles from the speakers, clean
them with a quick pass from a vacuum cleaner
with a brush attachment. is should remove any
dust accumulation. Avoid placing your speakers
in direct sunlight or near a source of heat that
may, over time, damage the nish.
Impor
Impor
Impor
ImporImportant:
tant:
tant:
tant: tant: Sa
Sa
Sa
SaSav
v
v
vve
e
e
ee
Y
Y
Y
YYour Bo
our Bo
our Bo
our Boour Boxes!
xes!
xes!
xes!xes!
If possible, save the cartons, packing pieces,
and plastic bags that came with your speak-
ers. ey will be useful in case you move or
have to ship your loudspeakers for any rea-
son. In any case, save all packing materials
until you are certain that the systems have
suffered no damage in shipment. If you nd
such damage, either visible or internal, con-
tact your dealer immediately for the proper
return procedure.
Figure 3

Produktspecifikationer

Varumärke: Atlantic
Kategori: högtalare
Modell: LCR2

Behöver du hjälp?

Om du behöver hjälp med Atlantic LCR2 ställ en fråga nedan och andra användare kommer att svara dig


högtalare Atlantic Manualer

Atlantic

Atlantic LCR2 Bruksanvisning

22 September 2024
Atlantic

Atlantic IWTS-10 LCR Bruksanvisning

13 Augusti 2024
Atlantic

Atlantic H-PAS AT-1 Bruksanvisning

4 Augusti 2024
Atlantic

Atlantic ICTS-6 HT Bruksanvisning

1 Augusti 2024
Atlantic

Atlantic IC-8.3 Bruksanvisning

30 Juli 2024

högtalare Manualer

Nyaste högtalare Manualer

Continental Edison

Continental Edison CELED53HP20V2B4 Bruksanvisning

27 Oktober 2024
Canton

Canton Vento 830.2 Bruksanvisning

27 Oktober 2024
Jamo

Jamo S7-25C Bruksanvisning

27 Oktober 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Bruksanvisning

27 Oktober 2024
Monitor Audio

Monitor Audio Silver C150 Bruksanvisning

26 Oktober 2024
FBT

FBT MITUS 210M Bruksanvisning

26 Oktober 2024
CyberData Systems

CyberData Systems SIP 011398 Bruksanvisning

26 Oktober 2024
Lamax

Lamax PartyGo1 Play Bruksanvisning

26 Oktober 2024
IKEA

IKEA SYMFONISK 405.847.50 Bruksanvisning

26 Oktober 2024
IKEA

IKEA SYMFONISK 804.923.34 Bruksanvisning

26 Oktober 2024