Atlantic SB-900 Bruksanvisning

Atlantic Subwoofer SB-900

Läs nedan 📖 manual på svenska för Atlantic SB-900 (4 sidor) i kategorin Subwoofer. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

Instruction Manual

SB-900

High Performance Powered Subwoofer

SB-900 Manual.indd 1 10/18/10 3:19:34 PM

Model SB-900 Powered Subwoofer

CAUTION: To reduce the risk of electric shock, do not remove the

cover (or back). No user serviceable parts inside. Refer to qualiﬁed per-

sonnel.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose

this appliance to rain or moisture. This device generates a fair amount

of heat. Make sure nothing blocks the ventilation to the rear panel of

the unit.

The lightning ﬂash with arrowhead, with in an equilat-

eral triangle, is intended to alert the user to the presence

of uninsu lated “dangerous voltage” within the product’s

enclosure that may be of sufﬁcient magnitude to consti-

tute a risk of electrical shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating maintenance (servicing) instructions in the

literature accompanying the appliance.

For Future Reference

Record your serial numbers and date of purchase here:

Model Number

Serial Number

Date of Purchase

The serial number is found on the back panel.

Safety Precautions

Speciﬁcations are those in effect at the time of printing. Atlantic Technology reserves

the right to change speciﬁcations or designs at any time without notice.

Model SB-900 Speciﬁcations

Bass Driver 8” long-throw

Output Power 125W RMS

Distortion (ampliﬁer) <0.5%

Frequency Response 32Hz – 200Hz ±3 dB

Peak Output 103dB SPL into 2000 cubic Feet

Dimensions (WxHxD) 11 x 13 x 13.125 in; 275 x 330 x 333mm

add 1.75" (45mm) H for feet

add 1.5" (38mm) D for knobs & grille

Weight 28lbs/12.7kg

Power Requirements 110-120/220-240V, 50/60Hz, 250W Max

SB-900 Manual.indd 2 10/18/10 3:19:34 PM

Instruction Manual

Low Level Input

Use the input to connect to the subwoofer or LFE line out from

your processor/receiver.

High Level Output

Connect main Left/Right speakers here when using the High

Level Input.

High Level Input

If your electronics do not have a line-level sub out, connect the Left-

Right speaker terminals of your electronics to these connections.

Set the SB-900’s crossover to “Lowpass,” and adjust accordingly.

AC Input

Use the included power cord to connect your ampliﬁer to a wall

outlet.

Voltage Select Switch

Voltage switch for use in different countries. This switch will be set

when you receive the unit. Change this setting only when you are

sure your application requires it. For US, the switch should be set

to the 115V position.

Product Serial Number

Write this number in the space provided on page 2 for future

reference.

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,

REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

DOUBLE INSULATION - WHEN SERVICING,

USE ONLY IDENTICAL REPLACEMENT PARTS

SE RIAL

MOD EL

SB-900-BLK Powered Subwoofer

AUTO

OFF ON

PHASE

INVERT NORMAL LEVEL LOWPASS

BYPASS

LOW LEVEL

RIGHT

L / MONOSTATUS

HIGH LEVEL

INPUTOUTPUT

RIGHTRIGHT L / MONOL / MONO

AC INPUT

50-60 HZ 180W MAX

FOR 110-120V, USE T2AL 250V FUSE

FOR 220-240V, USE T1AL 250V FUSE

110-120V

220-240V

MIN MAX 40 220

ENGINEERED IN THE USA,

MANUFACTURED IN CHINA

Status LED

This will be green for "on" condition, red for "standby"

Standby Switch

When in ON position, the ampliﬁer will always be on. When in the

AUTO position, the ampliﬁer will be in Automatic Standby Mode.

Phase Switch

This switch allows precise acoustic matching with satellite speaker

systems whose output may be phase reversed. Try in both the

highest and lowest positions — use the position that results in the

strongest bass output.

Bass Level Control

Use this control to set the level of bass desired

Low-Pass Control

An adjustable (55Hz to 200Hz) @ 18dB per octave low-pass

crossover.

Low-Pass Switch

When in the LOW-PASS position, adjustment of the crossover can

be made by the Crossover Control. If being fed a pre-ﬁltered or THX

signal, place the switch at the BYPASS position.

SB-900 Subwoofer Rear Panel

Figure 1

4 53

176

SB-900 Manual.indd 3 10/18/10 3:19:35 PM

Produktspecifikationer

Varumärke:	Atlantic
Kategori:	Subwoofer
Modell:	SB-900
Färg på produkten:	Grijs
Bredd:	179 mm
Djup:	154 mm
Höjd:	17.5 mm
Snäll:	Model Railways Parts & Accessories
Rekommenderad ålder (min):	- jaar
Material:	Kunststof
Antal per paket:	1 stuk(s)
Varumärkeskompatibilitet:	Faller
Antal bitar:	29 stuk(s)
Maträtt:	H0 (1:87)/TT (1:120)