Atlona AT-RON-448 Bruksanvisning

Atlona mottagare AT-RON-448

Läs nedan 📖 manual på svenska för Atlona AT-RON-448 (8 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
Installation Guide
1
AT-RON-448
4K HDR Eight-Output HDMI Distribution Amplier
AT-RON-448
The Atlona Rondo™ series are HDMI distribution ampliers for high dynamic range (HDR)
formats. They are HDCP 2.2 compliant and support 4K/UHD video @ 60 Hz with 4:4:4 chroma
sampling, as well as HDMI data rates up to 18 Gbps. The Rondo series are ideal for applications
requiring the latest as well as emerging 4K/UHD and HDR sources and displays. They are
compatible with all video resolutions, audio formats, and color space formats supported in the
HDMI 2.0a specication, plus the ability to pass metadata for HDR content. The Rondo Series
HDMI distribution ampliers include EDID management features, front panel LED indicators
for power and signal status, and the capability to cascade several units without compromising
performance.
Package Contents
1 x AT-RON-448
1 x 5 V DC power supply
1 x Captive screw connector, 5-pin
2 x Rack ears
4 x Rubber feet
4 x Screws
1 x Installation guide
IMPORTANT: Visit http://www.atlona.com/product/AT-RON-448 for the latest rmware
updates.
Installation Guide
2
AT-RON-448
AT -RON-448 EDID
INT LEARN
1 2 3 4 5 6 7 8
SYNCPOWER
BM
OUT PUT
1234
DC 5V
BACKUP
DC 5V
MAINANALOG S/PDIF
HDMI IN
AT-RO N-448
FW
--
L R
++
5678
1 POWER
This M LED indicator will glow solid
red when the power supply is MAIN
connected. The LED indicator will glow B
solid red when a backup power supply
is connected to the BACKUP power
receptacle.
2 SYNC
This LED indicator will glow solid blue
when an active source is detected on the
HDMI IN port.
3 Output Indicators
These LED indicator will glow solid blue
when a display or other sink device is
connected to the ports.HDMI OUT
4 INT
This LED indicator glows solid blue when
the unit is using the built-in EDID.
5 LEARN
This LED indicator glows solid blue when
the unit is in “EDID learn” mode.
6 EDID button
Press this button to switch between
“internal” and “learn” modes.
7 FW
Connect a mini USB cable to this port to
update the rmware.
8 HDMI IN
Connect an HDMI cable from this port to a
UHD/HD source.
9 ANALOG
Connect the included 5-pin captive screw
connector to this port to de-embed the
input audio to an analog output device.
10 SPDIF
Connect an RCA-type cable from this port
to de-embed the input audio to a digital
output device.
11 HDMI OUT 1 - 8
Connect an HDMI cable from each of
these ports to a display or other sink
device.
12 DC 5V
Two power receptacles are provided:
BACKUP and MAIN. If not using power
supply redundancy, connect the included
power supply to the power MAIN
receptacle. If using a backup power
supply (not included), then connect the
backup power supply from the BACKUP
power receptacle to an electrical outlet
that is on a dierent circuit than the main
power supply. Additional power supplies
can be purchased through Atlona.
31 2 4
6
5
87 910
Panel Descriptions
11 12
Installation Guide
3
AT-RON-448
1. Connect an HDMI cable from the UHD/HD source to the port on the AT-RON-448.HDMI IN
2. Connect up to eight display/sink devices to the ports on the rear panel of the HDMI OUT
AT-RON-448.
3. OPTIONAL: Connect the included 5-pin captive screw connector from the ANALOG port to
the input of an analog output device. Refer to the wiring instructions in the diagram above.
4. OPTIONAL: Connect an RCA-type cable from the SPDIF connector to the digital input of
output device.
5. Connect the included power supply to the power receptacle.DC 5V
Installation
Analog Audio De-Embedding
The AT-RON-448 provides the ability to de-embed two-channel balanced or unbalanced analog
audio on the ANALOG port, using the included 5-pin captive screw connector. This step is
optional.
Use wire strippers to remove enough insulation to allow each wire to be securely fastened to
each terminal of the captive screw connector block and connect the wires as shown.
GND
Side View Side View
-
+
GND
+
-
NOTE: If not using power supply redundancy, connect the included power
supply to the power receptacle. If using a backup power supply (not MAIN
included), then connect the backup power supply from the BACKUP power
receptacle to an electrical outlet that is on a dierent circuit than the main power
supply. Additional power supplies can be purchased through Atlona.
1 2
3
1 2
3
GND GND
+
-+
-
Balanced
Unbalanced

Produktspecifikationer

Varumärke: Atlona
Kategori: mottagare
Modell: AT-RON-448

Behöver du hjälp?

Om du behöver hjälp med Atlona AT-RON-448 ställ en fråga nedan och andra användare kommer att svara dig


mottagare Atlona Manualer

Atlona

Atlona AT-VGA12A Bruksanvisning

10 September 2024
Atlona

Atlona AT-OPUS-RX Bruksanvisning

10 September 2024
Atlona

Atlona AT-UHD-EX-70-KIT Bruksanvisning

10 September 2024
Atlona

Atlona AT-HDR-CAT-8 Bruksanvisning

10 September 2024
Atlona

Atlona Gain 60 Bruksanvisning

10 September 2024
Atlona

Atlona AT-UHD-EX-100CE-KIT Bruksanvisning

10 September 2024
Atlona

Atlona AT-UHD-EX-100CE-TX Bruksanvisning

10 September 2024
Atlona

Atlona AT-GAIN-120 Bruksanvisning

10 September 2024
Atlona

Atlona AT-PA100-G2 Bruksanvisning

10 September 2024
Atlona

Atlona AT-RON-448 Bruksanvisning

10 September 2024

mottagare Manualer

Nyaste mottagare Manualer

Speco Technologies

Speco Technologies PBM120AT Bruksanvisning

27 Oktober 2024
Fosi Audio

Fosi Audio V3 Bruksanvisning

26 Oktober 2024
Jensen

Jensen CAR710-4BC Bruksanvisning

26 Oktober 2024
Onkyo

Onkyo TX-RZ830 Bruksanvisning

24 Oktober 2024
Pioneer

Pioneer VSX-1122K Bruksanvisning

22 Oktober 2024
NAD

NAD C 355BEE Bruksanvisning

21 Oktober 2024
Yamaha

Yamaha HTR-5072 Bruksanvisning

21 Oktober 2024
Yamaha

Yamaha RX-A810 Bruksanvisning

20 Oktober 2024
Sherwood

Sherwood R-607 Bruksanvisning

20 Oktober 2024
Denon

Denon AVC-S660H Bruksanvisning

19 Oktober 2024