Aurora ShredSafe AU1050XE Bruksanvisning

Aurora Dokumentförstörare ShredSafe AU1050XE

Läs nedan 📖 manual på svenska för Aurora ShredSafe AU1050XE (15 sidor) i kategorin Dokumentförstörare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/15

PATENTED

P R O F E S S I O N A L G R A D E

AU1050XE

Model No. • Modéle No. • Modelo No.

Please read these operating instructions before using the unit.

Avant d’utiliser cet appareil, veuillez lire toutes les instructions.

Antes de operar esta unida, por favor lea todas las instrucciones.

1-800-327-8508

USA ONLY • ETATS SEULEMENT • LOS ESTADOS UNIDOS SOLOMENTE

310-793-5650

INTERNATIONAL • INTERNATIONAL • INTERNACIONAL

Email: info@auroracorp.com

For more information, please visit us at:

www.auroracorp.com

INSTALLATION

Mount the shredder securely to the rim of the waste basket. (FIGURE 1)

A socket-outlet should be near the equipment and be easily accessible.

Connect the power cord to any standard 120 volt AC outlet.

ATTENTION:

This model includes a built-in safety interlock mechanism, which requires the shredder to be correctly

mounted on to the included wastebasket. Located on the back center of the shredder, next to the

power cord, there is a curved flap-like shape that must FIT OVER THE OUTSIDE matching ridge of

the wastebasket. (FIGURE #1) THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROPERLY

MOUNTED AS PICTURED!

It is not designed to operate with any other wastebaskets. An activation switch located on the head unit

automatically shuts off the shredder when it is lifted or removed. The supplied wastebasket activates this

switch, which allows the shredder to be operable. Lining the wastebasket with a plastic bag will interfere

and may keep the shredder from functioning.

Caution: Crosscut shredders have very sharp exposed blades on the underside.

Use care when mounting the shredder on the wastebasket.

FIGURE 1

Paper Shredder

Operating Instructions

Installation

Operation

Maintenance

Troubleshooting

Service Center

Warning

Limited Warranty

Sheet Capacity

Paper Shred Size

Paper Entry Width

Credit Card Capacity

Voltage

10 Sheets of 20lb. bond paper*

7/32 in. x 2 in. pieces

(0.56 cm x 5.1 cm pieces)

8.7 in / 22.0 cm

1 at a time

120V~60Hz / 3.0 A

* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER

Heavier paper, humidity or other than rated voltage may reduce shredding capacity.

54 CONTINUED NEXT PAGE

OPERATION

READY: The shredder is currently on STANDBY and ready to operate when paper is inserted. With the

feed slot now exposed, you can shred sheets of paper or 1 credit card per pass (FIGURE 5).

DISABLED: The safety feature has been activated. SHREDDER IS All power to the

CURRENTLY SHUT OFF AND WILL NOT OPERATE until the cover is returned to the

“READY” setting. The cover has been completely tilted beyond the safe position (FIGURE 5).

When shredding is completed, you can press the designated “PUSH CLOSE” area on the cover to tilt

shut the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed when shredder

is not in use to prevent any objects from accidentally getting into the feed slot.

*Be sure to not tilt open the cover completely beyond the preset position, otherwise

the ShredSafe™ power cut off feature will be activated and the shredder will be

inoperable.

Shredding of any of the following materials is considered misuse and will completely

void the product warranty:

Never shred large paper clips, window or insulated envelopes, continuous forms,

newsprint, bound pages (in example: notepads, checkbooks, magazines, etc...),

transparencies, laminated documents, cardboard, any items with adhesives, hard

materials or plastic (except Credit Cards).

This shredder will shred staples and small paperclips. It is recommended that you remove paper clips

whenever possible to extend the lifespan of your shredder.

Only shred credit cards by feeding them vertically into the middle of the entry,

releasing when shredding begins. Never feed more than one credit card at a time.

DO NOT ACTIVATE REVERSE FUNCTION WHILE SHREDDING CREDIT CARDS.

Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive

damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting

blades and internal components.

Overheating with extended use: In the event that the shredder has shred continuously beyond

the maximum running time and overheating, the unit will automatically shut off. If this happens, switch

the shredder Off for 30 minutes or longer before resuming normal operation.

FIGURE 5

OPERATION

AUTO / ON:

This setting allows the shredder to be automatically started by inserting paper into the

shred opening. Always feed the paper in as straight as possible. When the paper has

passed through, the shredder will automatically stop. (FIGURE 2)

OFF:

This setting turns off all features of the shredder. For safety reasons, we recommend that

you leave the shredder in the "Off" position whenever the shredder is unattended or not

in use. (FIGURE 2)

REV (REVERSE):

In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters

of paper that has not passed through. Never attempt to clear a jam by using the reverse

function until you have emptied the wastebasket. (FIGURE 2)

READY:The green LED light indicates the shredder in “On” and ready for use.

FIGURE 3

FIGURE 4

FIGURE 2

ShredSafe™ technology is an added safety feature incorporated in this

particular model. It is a new technology where the shredder is able to detect

forced entry and automatically cuts the power off, preventing further shredding.

To begin shredding, locate the switch on the unit and select the “Auto” mode (FIGURE 2). The Green

LED light indicates the shredder is “On” and ready to use. Press the designated “PUSH OPEN” area

on the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3). The cover will

click into a preset position where the “SHREDDER STATUS” indication line must align

with the “READY” setting.

Produktspecifikationer

Varumärke:	Aurora
Kategori:	Dokumentförstörare
Modell:	ShredSafe AU1050XE
Färg på produkten:	Wit
Vikt:	2300 g
Bredd:	350 mm
Djup:	350 mm
Höjd:	39 mm
Snäll:	Elektronische weegschaal
Användarmanual:	Ja
Blåtand:	Ja
Automatisk avstängning:	Ja
Beeldscherm:	LCD
Noggrannhet:	100 g
Antal batterier/batterier som stöds:	4
Maximal viktkapacitet:	150 kg
Form:	Vierkant
Måttenhet:	kg/lb
Minnesfunktion:	Ja
BMR-bestämning (Basal Metabolic Rate):	Nee
Batterier-ingår:	Ja
Batterityp:	AA