Barumi EF-BM-6000 Bruksanvisning

Barumi toalett EF-BM-6000

Läs nedan 📖 manual på svenska för Barumi EF-BM-6000 (8 sidor) i kategorin toalett. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

3 STEP INSTALLATION

WHAT TO EXPECT DURING INSTALLATION

THE 3 MAIN STEPS.

REMOVE THE CURRENT TOILET SEAT

Find the bolt caps at the back of the

seat and open them if they’re closed.

Next, ﬁrmly grip the nut that is

fastened to the end of the bolt

and begin turning the bolt

counterclockwise to unfasten the

seat. In some cases, if the nut has

wings, you can turn the nut while

holding down the bolt.

Depending on your toilet seat,

you may need to use a phillips

screwdriver and a wrench.

CHECK FOR MISSING PARTS

To ensure your installation is worry-free, please make sure you have all the

necessary parts from the factory by referencing the parts list. Set each part

aside so you can easily access them during installation.

STEP 1 PREPARE!

barumiusa.com • info@barumiusa.com

INSTALLATION GUIDE

CONNECT TO YOUR BATHROOM

OUTLET (BEST OPTION)

If your bathroom is equipped with a

grounded electrical outlet (GFCI), plug your

power cord into it to turn the bidet on.

OUTLET NOT AVAILABLE

If your bathroom is not equipped with a

grounded electrical outlet, an extension cord

may be used to connect the power cord to a

GFCI outlet. Please use a grounded

extension cord.

POSITIONING BRACKET

PLEASE NOTE: Your positioning bracket setup may look different from the image above.

Please make sure each screw is spaced inside the frame identically to each other.

THE POSITIONING BRACKET MUST BE INSTALLED PROPERLY

Before installing the bidet seat, it is imperative the

positioning bracket is installed ﬁrst AND properly.

If this bracket is not positioned and installed

properly, your bidet seat will not be aligned with

your toilet.

STEP 2 INSTALL!

STEP 3 CONNECT!

Screw M/S

Washer

Bolt bracket

Base bracket

Rubber nut insert

Installation hole

barumiusa.com • info@barumiusa.com

INSTALLATION GUIDE

INSTALLATION PROCEDURE

Positioning bracket

Flexible hose

T-valve

Secure bracket (2pcs) Screw M/S (2pcs)

Washer (2pcs)

Rubber insert (2pcs)

Separate water supply hose

Shut off the water valve.

Drain the toilet tank.

Disconnect the hose.

BEFORE INSTALLATION

For optimal performance, please install the product after reading the

installation manual thoroughly.

Plug in the water supply only after installation is complete.

Toilet hose

Water supply valve

barumiusa.com • info@barumiusa.com

INSTALLATION GUIDE

Produktspecifikationer

Varumärke:	Barumi
Kategori:	toalett
Modell:	EF-BM-6000
Färg på produkten:	Black, Red
Vikt:	21700 g
Bredd:	350 mm
Djup:	520 mm
Höjd:	460 mm
Användarmanual:	Ja
Typ av strömkälla:	AC
Snabbstartsguide:	Ja
Genomsnittlig effekt:	250 W
Antal per paket:	1 stuk(s)
Rekommenderad användning:	Universeel
Medium effekt subwoofer:	250 W
Ljudutgångskanaler:	- kanalen
Högtalarplacering:	Vloer
Diameter drivrutin subwoofer (imperiaal):	12 "
Frekvensomfång:	50 - 150 Hz
Typ av högtalare:	3-weg
Subwoofertyp:	Actieve subwoofer
Subwooferns frekvensområde:	25 - 150 Hz
Subwooferns bredd:	350 mm
Höjd på subwoofern:	460 mm
Subwooferns djup:	520 mm
Vikt subwoofer:	21700 g
Trådlös subwoofer:	Ja
AC-ingångsfrekvens:	50 - 150 Hz
Diameter drivrutin för subwoofer:	304.79 mm
Crossover frekvens:	150 Hz
Kontrollfas:	Ja