Baumr-AG SGR750 Bruksanvisning

Baumr-AG Slipmaskin SGR750

Läs nedan 📖 manual på svenska för Baumr-AG SGR750 (45 sidor) i kategorin Slipmaskin. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/45

STUMP GRINDER

STUMP GRINDERSTUMP GRINDER

Colours, designs, and appearances may vary

User Manual

[Revision 20235 .0 March ]

READ THIS MANUAL CAREFULLY BEFORE USE FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY –

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,

assembly, inclusions, specifications, description, and packaging.

The product is NOT supplied with engine oil, although traces of oil from the manufacturing process may be present. It is essential to add

adequate engine oil of the correct type to the engine before use. Failure to add engine oil will void the product warranty.

Stump Grinder

E&OE © -AG 2 2023 Baumr

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• - If you are not familiar with the Before Use

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

Stump Grinder

E&OE © -AG 3 2023 Baumr

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Wherever possible, use a residual current

device (RCD).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform -related service activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Introduction

• This manual is a valuable document. It describes your new machine. Read the manual carefully before attempting to use the machine. Following

the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale value.

• Please contact your dealer for more information.

• If you sell your machine, make sure to give the operator’s manual to the new owner.

Use

The stump grinder is used to remove tree stumps. By moving the cutting wheel in sweeping movements laterally over the top and front of the stump,

you can gradually grind it away. Read the chapter “Safety Instructions” before you use the machine for the first time.

Insure Your Machine

Contact your insurance company to check on insurance coverage for your new machine. You should have all-inclusive insurance for liability, fire,

damage, and theft.

Safety Instructions

• ! Under no circumstances may the original design of the machine be modified without written approval from the manufacturer. Such WARNING

modifications not only affect the performance and durability of the machine, but many even pose a safety risk for users and those in the vicinity.

Unauthorised modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property

damage. Modifying the machine without written approval from the manufacturer may void the guarantee.

• The stump grinder can be dangerous if used improperly or without due care and can lead to serious accidents, in the worst cases even fatal

accidents. It is very important that you read this operator’s manual and understand the instructions before you attempt to use the machine.

• Do not use the machine until you have read the operator’s manual carefully and understand the instructions given. All maintenance work or

adjustment not described in this manual must be performed by an authorised service workshop.

• : Lubricate the cutting wheel bearings BEFORE first use. Re-lubricate the cutting wheel bearings after every 10 hours of use.CAUTION Failure

to properly lubricate and maintain the cutting wheel bearings may void product warranty.

General Use

The objective of this manual is to help you use your machine safely and to give you information about how to maintain your machine. Please read

the manual carefully before attempting to use the machine.

If after reading the operator’s manual you are still unsure about the safety risks associated with use of the machine, you should not use the

machine. Please contact your dealer for more information.

These safety instructions only address the basics for safe use. It would be impossible in the safety instructions to describe all possible risk

situations that could arise when using the machine. You can, however, prevent accidents by always using common sense.

• Read this manual carefully and make sure you understand it before using the machine or performing any maintenance. If the user cannot read

this manual, it is the responsibility of the machine owner to explain the contents to the user.

• Follow all safety instructions. Failure to may result in injury to yourself or others.

• Accident prevention regulations, other general safety regulation, occupational safety rules and traffic regulation must be followed without fail.

• All users shall be trained in use of the machine. The owner is responsible for training users.

• Engage an authorised workshop for all service and repair not described in this manual.

• Learn how to use the machine and its controls safely and learn to recognise the safely decals.

• Only use the machine for removing tree stumps; it is not intended for any other use.

• Check that the machine is in serviceable condition prior to use.

Produktspecifikationer

Varumärke:	Baumr-AG
Kategori:	Slipmaskin
Modell:	SGR750

Behöver du hjälp?

Om du behöver hjälp med Baumr-AG SGR750 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Slipmaskin Baumr-AG Manualer

Baumr-AG SGR750 Bruksanvisning

17 Augusti 2024

Slipmaskin Manualer

Nyaste Slipmaskin Manualer

Tryton TDS125B Bruksanvisning

26 Oktober 2024

Chicago Pneumatic CP7255 Bruksanvisning

26 Oktober 2024

Bosch GWS 18-150 PL Professional Bruksanvisning

23 Oktober 2024

Parkside PEXS 270 A1 Bruksanvisning

17 Oktober 2024

Parkside PWS 1010 Bruksanvisning

17 Oktober 2024

Hikoki GP2S2 Bruksanvisning

15 Oktober 2024

Makita GA9060R Bruksanvisning

14 Oktober 2024

Hitachi G 13SR Bruksanvisning

14 Oktober 2024

Makita DGA700Z Bruksanvisning

13 Oktober 2024

Milwaukee 2781-21 Bruksanvisning

8 Oktober 2024