BDI Muv 1252 Bruksanvisning

BDI Tabell Muv 1252

Läs nedan 📖 manual på svenska för BDI Muv 1252 (5 sidor) i kategorin Tabell. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

C1 Top Panel x 2

A1 Glass Panel x 2

C2 Middle Panel x 2

C3 Bottom Panel x 2

H2 Swivel Locking

Casters x 8

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your BDI

products. Register today, and you will be entered to win free a

BINK table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your Müv Table is designed for indoor use on level floors.

Clean glass with glass cleaner and wood veneer with a moist cloth.

Müv is engineered for easy assembly. Carefully follow this procedure to

prevent any damage. Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, contact BDI Customer Service at: customerservice@bdiusa.com.

For all other concerns, please contact your BDI retailer.

bdiusa.com

customerservice@bdiusa.com

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 5.17.2019 V5

MÜV™ 1252

Tables

Tool Required:

Phillips Screwdriver

H1 M4 x 12mm

Pan Head Screw x 32

T1 Hex Driver x 1

Component List

bdiusa.com

customerservice@bdiusa.com

MÜV 1252

Table

Step 2 - top panel C1Place the (which has a finger groove around the bottom edge as shown). Remove the

protective film from Slide one edge of into the matching glass panel A1. glass panel A1 (with aluminum rail)

slot on bottom side of If the aluminum channel is tight, brace the front edge of the top panel. top panel C1.

Step 3 - Take the and position it as shown until the connectors engage with each other. middle panel C2

Make sure the edges are flush.

C1 Top Panel

A1 Glass Panel

Finger Groove

Wall

bdiusa.com

customerservice@bdiusa.com

MÜV 1252

Table

Step 4 - hex driver T1 Place into the access holes at a 45 degree angle and tighten the connectors by turning

clockwise about 1/4 turn until tight. You may need to until the end of the driver engagwiggle the hex driver -

es with the connecting hardware. Tighten all 4 connectors.

Step 5 - bottom panel C3 Orient the as shown and slide it so that the aluminum channel goes into the slot on

bottom panel C3 Wiggle and lift bottom panel C3. Keep sliding until the mitered edges align and touch. to

align the joint and close the seam.

4 access holes

to tighten connectors

C2 Middle Panel

T1 Hex Driver

C3 Bottom Panel

Aluminum Channel

Produktspecifikationer

Varumärke:	BDI
Kategori:	Tabell
Modell:	Muv 1252
Färg på produkten:	Zwart
Vikt:	74 g
Sladdlängd:	2 m
Maximal upplösning:	3840 x 2160 Pixels
Maximal uppdateringshastighet:	60 Hz
Plug and play:	Ja
Antal per paket:	1 stuk(s)
Maximal dataöverföringshastighet:	20000 Mbit/s
USB-strömförsörjning:	Ja
USB-strömleverans till max.:	240 W
Thunderbolt-teknik:	Ja
Anslutning 1:	USB C
Anslutning 2:	USB C
Kontakt 1 formfaktor:	Recht
Kontakt 2 formfaktor:	Recht
Anslutning 1 typ:	Mannelijk
Anslutning 2 typ:	Mannelijk
Thunderbolt version:	4