Behringer DI400P Bruksanvisning

Behringer Växla DI400P

Läs nedan 📖 manual på svenska för Behringer DI400P (21 sidor) i kategorin Växla. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/21
ULTRA-DI DI400P
Thank you for showing condence in Behringer products by
purchasing the ULTRA-DI DI400P. The DI400P is a high-performance
passive direct injection box.
◊
◊
◊
◊ ◊ Please read the safety instructions that appear at the
end of this document.
Being on stage or in the studio, musicians often look for ways to
connect certain signal sources directly to the mixing console. Even
though this approach has obvious advantages, there are still some
technical hurdles obstructing its implementation. For example,
keyboards seldom feature balanced outputs, and guitars can not be
directly connected to mixing consoles because of the high impedance
of guitar signals.
The DI400P lets you directly tap into a high-impedance, unbalanced
signal—for example, the signal between a guitar and a guitar amp.
From there on, you can feed the signal directly to a mixing console.
V 1.0
2ULTRA-DI DI400P
1. Control Elements and Connections
Fig. 1: Top view
(1) + (2) PARALLEL IN/OUT (¼" TS): These connectors are used for
connecting unbalanced signal sources. Because both connectors are
wired in parallel, they can be used both as an input and as a direct
output to loop the signal through to a monitor amplier.
(3) OUTPUT (XLR): This is the balanced mic-level output. Use a high-
quality balanced microphone cable to establish connection.
(4) Using the (ground lift) switch, youcan fully separate GND LIFT
input and output grounding. Depending on how the equipment
to which your DI400P is connected is grounded, using the GND
LIFT switch lets you lower hum noise or ground loops. When
the GNDLIFT switch is in LIFT position, the ground connection is
interrupted.
The of the DI400P is located at the bottom.SERIAL NUMBER
(1)
(3)
(2)
(4)
2. Connecting an In
ULTRA-DI DI400P
4ULTRA-DI DI400P
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specications, appearances and
other information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TCElectronic, TC Helicon, Behringer, Bugera, Oberheim,
Auratone, AstonMicrophones, Aston Microphones and Coolaudio are trademarks
or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2021 All rights reserved.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Install in accordance with the manufacturer’s instructions.
8) Only use attachments/accessories specified by the manufacturer.
9) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way.
Important Safety
Instructions

Produktspecifikationer

Varumärke: Behringer
Kategori: Växla
Modell: DI400P

Behöver du hjälp?

Om du behöver hjälp med Behringer DI400P ställ en fråga nedan och andra användare kommer att svara dig


Växla Behringer Manualer

Behringer

Behringer DI400P Bruksanvisning

9 Augusti 2024

Växla Manualer

Nyaste Växla Manualer

Tork

Tork SS700ZA Bruksanvisning

9 April 2025
Cudy

Cudy FS1024 Bruksanvisning

9 April 2025
Elro

Elro FA624 Bruksanvisning

7 April 2025
Lancom

Lancom GS-2412 Bruksanvisning

5 April 2025
Lancom

Lancom GS-2412P Bruksanvisning

5 April 2025
Lancom

Lancom GS-2426 Bruksanvisning

5 April 2025
Lancom

Lancom GS-2426P Bruksanvisning

5 April 2025
Hager

Hager ARF970D Bruksanvisning

3 April 2025
Hager

Hager ARF920D Bruksanvisning

3 April 2025
Roline

Roline 14.01.3579 Bruksanvisning

2 April 2025