Benning CC 4-2 Bruksanvisning

Benning Inte kategoriserad CC 4-2

Läs nedan 📖 manual på svenska för Benning CC 4-2 (22 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/22

BENNING CC 4-1 / CC 4-2

Operating manual

Translation of the German original version

5186 / 07/2021 en

Legal notice

5186 / 07/2021 enBENNING CC 4-1 / CC 4-22

Legal notice

Notes concerning the documentation

Ensure that the applicable documentation is used for this product. For safe handling, knowledge

that is provided in these instructions is required.

The product may only be handled while following this documentation, particularly the safety

instructions and warnings it contains. The personnel must be qualified for the respective task

and have the capability to recognise risks and prevent possible dangers.

Manufacturer and holder of rights

BENNING Elektrotechnik und Elektronik GmbH&Co.KG

Münsterstraße135–137

46397 Bocholt

Germany

Phone: +492871/93‑0

E-Mail: duspol@benning.de

Internet: www.benning.de

Commercial register Coesfeld HRA No. 4661

This document – particularly all of the contents, texts, photographs and graphics that it contains

– are protected by copyright.

No part of this documentation or the associated contents may be reproduced or edited, copied

or distributed using electronic media in any form (printed, photocopied or using any other

method) without express written permission.

Disclaimer

The contents of the documentation has been checked to ensure that it corresponds to the

hardware and software described. Nevertheless, deviations cannot be ruled out, so Benning

cannot guarantee complete correspondence. The contents of this documentation are checked

at regular intervals, and any corrections that are needed are contained in the versions that

follow.

General non-discrimination

Benning is aware of the importance of language with regard to the equality of men and women,

and endeavours to take this into account at all times. To improve readability, we have refrained

from consistently using differentiating formulations.

Table of contents

1 Introduction................................................................................................................................................6

1.1 General notes........................................................................................................................6

1.2 History ...................................................................................................................................7

1.3 Service & support..................................................................................................................7

2 Safety..........................................................................................................................................................8

2.1 Warning system ....................................................................................................................8

2.2 Standards applied .................................................................................................................8

2.3 Symbols used........................................................................................................................9

2.4 Intended use .......................................................................................................................10

2.5 Special types of risks ..........................................................................................................11

3 Scope of delivery.....................................................................................................................................12

4 Device description...................................................................................................................................13

4.1 Device structure ..................................................................................................................13

4.2 Functions.............................................................................................................................14

5 Operation..................................................................................................................................................16

5.1 Requirements for measuring...............................................................................................16

5.2 Measuring with a multimeter ...............................................................................................17

5.3 Measuring with the BENNINGIT200 installation tester .....................................................17

6 Maintenance.............................................................................................................................................18

6.1 Maintenance schedule ........................................................................................................18

6.2 Cleaning the device.............................................................................................................18

6.3 Calibrating the device..........................................................................................................18

7 Technical data..........................................................................................................................................19

8 Disposal and environmental protection ................................................................................................20

Index .........................................................................................................................................................21

5186 / 07/2021 en 3BENNING CC 4-1 / CC 4-2