Bikemate E83005 Bruksanvisning
Bikemate
Cykeldator
E83005
Läs nedan 📖 manual på svenska för Bikemate E83005 (2 sidor) i kategorin Cykeldator. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
®
WIRELESS BICYCLE COMPUTER
USER GUIDE
After Sales Support
Now you have purchased a Bikemate
®
product you can rest
assured in the knowledge that as well as your 3 year parts
and labour guarantee you have the added peace of mind of
dedicated helplines and web support. The 3 year warranty
does not affect your statutory rights.
• Maximum speed (max 99.9 km/h or mph)
• Time (12 hr / 24 hr display)
• Average speed (0-99.9 km/h or mph)
• Scan function (for DST, MXS, AVS, TM)
• Cache memory (for TM, DST, AVS)
• Speed comparison (+/-)
• Speed trend ( or )
• Service indicator
• Odometer save function
• Temperature display (-10⁰C to +50⁰C )
• Temperature display setting (⁰F / ⁰C)
• Calories
• Fat Burning
• Automatic start/stop
Ride speed
This indicates the current speed
(0-99 km/h).
Daily distance (DST)
(step information function, reset function)
The distance travelled is displayed with
DST. The trip kilometre counter switches on
automatically with the tachometer. To set the trip kilo-
metre counter to 0, press the left button for about 2 sec-
onds in the DST function.
GB
IRL
WIRELESS BICYCLE COMPUTER
Congratulations!
You have made an excellent choice with the purchase
of this quality Bikemate® product. By doing so you now
have the assurance and peace of mind which comes from
purchasing a product that has been manufactured to the
highest standards of performance and safety, supported
by the high quality standards of ALDI.
Total distance (ODO)
The kilometre counter adds up the total num-
ber of kilometres travelled and displays this
with ODO on the screen. The kilometre coun-
ter can only be reset to zero by removing the battery or by
simultaneously pressing both buttons for about 3 seconds.
Trip time (TM)
The trip time measurement function is in-
dicated by TM on the display. This function
automatically switches on with the speed-
ometer and is suspended each time the bike stops so that
only the actual travel time is measured. The clock is set
to 0 by pressing the left button in the DST function.
Maximum speed (MXS)
The maximum speed is indicated on the dis-
play with MXS and is saved automatically. To
delete the maximum speed, press and hold
the left button.
Time (12 hr / 24 hr)
By pressing the right-hand button you ar-
rive at the next function (time). To set the
time, press the left button for 3 seconds. By
doing so you can then select whether the time is shown
in the 12 hour or 24 hour mode by pressing the right
button. After selecting the display press the left but-
ton which makes the hour indicator flash. You can now
set the hours with the right button. To set the minute
indicator, please press the left button again. The minute
indicator then flashes which you can set by pressing the
right button. After setting the time press the left button.
Average speed (AVS)
The average speed is displayed by AVS. This
function is connected with the trip timer so
that only the average speed for the actual
trip is saved.
Scan function (SCAN)
After setting the scan function all functions
(DST, MXS, AVS, TM) are displayed automati-
cally one after the other.
Cache memory
Pressing the left button, the computer
has a unique cache memory with which
the display can be retained at the end of a
journey leg and the values for TM, DST and AVS can
be reviewed at a later date (the memory is shown by
pressing the right-hand button). This is especially
practical for measuring the time if you go past the fin-
ish line in a race because the automatic stop clock can-
not be stopped manually. It works in such a way that on
cycling past the finish line press the left button for a
time so that the display is retained.
Speed comparison
(cadence)
A “+” or “-” sign is shown on the right-hand
side of the speed display to indicate wheth-
er you are travelling faster or slower than the average
speed (AVS). A “-” sign indicates that you are travelling
below the average speed.
Speed trend
(acceleration and deceleration)
A symbol that represents a cyclist is shown
on the left-hand side of the speed display. A bike trav-
elling forwards indicates that you are accelerating. A
bike travelling backwards indicates that you are getting
slower.
Odometer save function
The save function (SAVE) enables you to save
the distance covered (ODO) which is important
information for you. This information is also retained after
changing the battery. Press the right button to call up the
“ODO” mode after changing the battery and the re-setting
of the wheel sizes, and save the information under “ODO”.
Afterwards press and hold the left button for two seconds
until the last setting flashes. Press the right button to set
the display, confirm this with the left button and make the
entry. Repeat the above process to set the required value
for the odometer display. Press the left button once again
and return to “ODO” mode.
Temperature display settings
Optionally, the bike computer can display the
temperature in ⁰C (Celsius) or F (Fahrenheit).
For temperature indication keep the left but-
ton depressed for 2 seconds. ⁰C is shown. By pressing the
right button the temperature is converted to F. Confirm the
choice with the left button.
Calorie counter (CAL)
The average energy use in calories (cal) is au-
tomatically counted by means of the calorie
counter. To reset the calorie counter hold the
left button for 2 seconds in CAL mode. Press the right but-
ton to obtain the monitoring function FAT.
Fat burning (FAT)
This approximate value applies to the amount
of fat (in g) burnt during the trip. To reset the
value for fat to zero hold the left button down
for about 2 seconds. Press the right button to obtain the
monitoring function SCAN FUNCTION.
Computer installation
Push the bike computer into the installation bracket until it
clicks into place. Press the release button to detach the bike
computer. (See Fig. 1.)
Left Right
release
button
Fig. 1
We want you to be completely satisfied with your
purchase so this Bikemate® product is backed by a
comprehensive manufacturer’s 3 year warranty and an
outstanding after sales service through our dedicated
Helpline.
We hope you will enjoy using your purchase for many
years to come. If you require technical support or in
the unlikely event that your purchase is faulty please
telephone our Helpline for immediate assistance. Faulty
product claims made within the 3 year warranty period
will be repaired or replaced free of charge provided that
you have satisfactory proof of purchase (keep your till
receipt safe!). This does not affect your statutory rights.
However, be aware that the warranty will become null
and void if the product is found to have been deliberately
damaged, misused or disassembled.
Functions
If you press the lower button the individual functions are
listed on the display.
Functions
• Ride speed (0 – 99.9 km/h or mph)
• Daily distance (max 999.9 km or miles)
• Total distance (max 999.9 km or miles)
• Trip time (0:59’ 59’ - hours, minutes, seconds)
MODEL: E83005
AFTER SALES SUPPORT
GB 00800 / 68546854 monz-gb@teknihall.com
IRL 00800 / 68546854 monz-ie@teknihall.com
(free of charge)
MODEL: E83005
AFTER SALES SUPPORT
GB 00800 / 68546854 monz-gb@teknihall.com
IRL 00800 / 68546854 monz-ie@teknihall.com
(free of charge)
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE,
WARWICKSHIRE, CV9 2SH.
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
Visit us at www.aldi.com
Automatic start/stop
To save the battery the device switches itself off after
5 – 6 minutes if no impulse is received by the sensor. To
switch the device on again, press one of the buttons.
Setting the wheel sizes
Press and hold the left button and the right
button for 2 seconds (or after replacing the
battery) to switch the device to the wheel
size entry mode. Multiply the wheel diameter, d (figure
2), in mm by 3.1416 in order to establish the wheel coef-
ficient, c. Press the left button to select the position that
needs to be entered and then the right button to enter the
required number (for fast forward keep pressed down).
Press the left button again to select km/mile. (Please
note that removing the battery deletes the wheel size
information).
- Distance in mm per revolution -
Please use this table for assistance in calculating the
wheel diameter and wheel circumference.
Choice between miles and kilometres
After setting the wheel size the symbol “KM” will blink
above the wheel size entry. If you would like the com-
puter to show the speed in km/h press the left button.
If the computer should calculate in mph press the right
button first and then the left button.
Calorie counter
On the display the prompt km/h will then blink. At this
point you have to set your age. By pressing the right but-
ton you can change the value and go forward to the next
figure using the left button. In the bottom line you can
set your body weight in kg. By pressing the right button
you can change this value and go forward to the next fig-
ure using the left button.
Service indicator
After setting the wheel diameter the indicator 600 km
flashes. In the bottom left corner you will see a spanner.
This function enables you to set the number of kilome-
tres until the next service of your bike. By pressing the
right button you can choose to set a number between
200 and 800 km as a reminder to service your bike. By
pressing the left button the value is saved. On reaching
the pre-set number of kilometres a spanner appears in
the display. By pressing the left button you can switch
off the reminde
r.
BATTERY DISPOSAL:
Batteries must not be placed in household rubbish contai-
ners. You are obligated by law to return used batteries and
rechargeable batteries. They can be dropped off at our shop
or at other locations near you (e.g., other businesses or muni-
cipal collection points). Batteries and rechargeable batteries
are marked with a crossed-out dustbin and with the chemical
symbol of the toxic substance, i.e. „Cd“ for cadmium, „Hg“ for
mercury and „Pb“ for lead.
BATTERY SAFETY
Always follow warnings and manufacturers instrtuctions for
both the batteries and the battery-operated product. Use only
1
2
3
2
Fig. 2
WHEEL SIZES
Wheel size in
inches
ETRTO
Nr.
Wheel
coefficient
16 x 1.75 47 – 305 1216
20 x 1.75 47 – 406 1623
24 x 1.75 47 – 507 1940
26 x 1.6 44 - 559 2051
26 x 1.75 x 2 47 - 559 2070
26 x 1.9 50 - 559 2089
26 x 2.00 54 - 559 2114
26 x 2.125 57 - 559 2133
26 x 1 3/8 37 - 590 2105
26 x 1 3/8 x 1 1/2 37 - 584 2086
26 x 3/4 20 - 571 1954
27 x 1 1/4 32 - 630 2199
28 x 1.5 40 - 622 2224
28 x 1.75 47 - 622 2268
28 x 1 3/8 x 1 5/8 37 - 622 2205
700 x 18C 18 - 622 2102
700 x 20C 20 - 622 2114
700 x 23C 23 - 622 2133
700 x 25C 25 - 622 2146
700 x 28C 28 - 622 2149
700 x 32C 32 - 622 2174
700 x 35C 37 - 622 2205
700 x 40C 40 - 622 2224
1a
1b
2 mm Max
2
3
SENSOR
Fault Problems
No tachometer display Incorrect magnet/sensor alignment
Delayed display of request The temperature range lies outside of
the specified minimum value (0-55⁰C)
Black screen The temperature is too high or the
display was exposed to direct sunlight
for too long
Failing screen display Empty battery or the power supply is
too weak
Incorrect set-up for distant Check the sensor and magnet reading
positions, that the battery is correctly
fitted and the fitting is in accordance
with the instructions
The display shows blurred / Remove and reinsert the battery
irregular symbols
click
1c
the correct type and size battery indicated. Check the contacts
of both the battery and the battery-operated product for cleanli-
ness. Always insert the batteries correctly with regard to polari-
ty (-/+), matching the positive and negative symbols of both bat-
tery and product. Putting them in backwards, the product will
sometimes still operate, but may inadvertently charge the bat-
teries resulting in venling or leaking. Remove and safely dispose
or exhausted batteries immediately. Replace all batteries in bat-
tery-operated products at the same time and with the batteries
of the same type and manufacture. Do not short circuit batteries.
When the positive (+) and negative (-) terminals of a battery are
in contact with each other, the battery can become short circui-
ted. For example, loose batteries in a pocket with keys or coins
can be short circuited possibly resulting in venting or explosi-
on. Do not heat batteries. Do not crush, puncture, dismantle or
otherwise damage batteries. Do not charge non-rechargeable
batteries. Keep batteries out of reach of small children. If you
suspect that a battery has been swallowed, seek immediate me-
dical advice. Please retain for future reference.
PACKING DISPOSAL
The packaging is made of 100% environmentally friendly ma-
terials which can be disposed of at local recycling points.
COMPUTER DISPOSAL
For disposing of the computer and radio sensor,
please obtain advice from your local authority or
town council.
Wheel size
in inches
ETRTO
Nr.
!
!
!
!
Produktspecifikationer
Varumärke: | Bikemate |
Kategori: | Cykeldator |
Modell: | E83005 |
Behöver du hjälp?
Om du behöver hjälp med Bikemate E83005 ställ en fråga nedan och andra användare kommer att svara dig
Cykeldator Bikemate Manualer
10 September 2024
4 September 2024
31 Augusti 2024
29 Augusti 2024
Cykeldator Manualer
- Cykeldator Bosch
- Cykeldator Garmin
- Cykeldator Pioneer
- Cykeldator Topcom
- Cykeldator Ascot
- Cykeldator Crivit
- Cykeldator Timex
- Cykeldator Cateye
- Cykeldator Ventura
- Cykeldator Bryton
- Cykeldator BBB
- Cykeldator Trelock
- Cykeldator Polar
- Cykeldator Mio
- Cykeldator Sigma
- Cykeldator Bell
- Cykeldator Hema
- Cykeldator Contec
- Cykeldator Lezyne
- Cykeldator Sunding
- Cykeldator Wahoo Fitness
- Cykeldator Echowell
- Cykeldator Magene
- Cykeldator Pro
- Cykeldator Stella
- Cykeldator IGPSport
- Cykeldator Cannondale
- Cykeldator Trek
- Cykeldator Prophete
- Cykeldator Powertap
- Cykeldator VETTA
- Cykeldator VDO
- Cykeldator CicloSport
- Cykeldator Bontrager
- Cykeldator Sigma Sport
- Cykeldator BBB Cycling
- Cykeldator Osynce
- Cykeldator Cube
- Cykeldator Dresco
- Cykeldator Bafang
- Cykeldator Silent Force
- Cykeldator Cordo
- Cykeldator Knog
- Cykeldator Matrabike
- Cykeldator Speedmaster
- Cykeldator Wahoo
- Cykeldator Decathlon
- Cykeldator Axiom
- Cykeldator Rawlink
- Cykeldator Kellys
- Cykeldator Filmer
- Cykeldator Walfort
- Cykeldator Ciclo
- Cykeldator Stels
- Cykeldator Blackburn
Nyaste Cykeldator Manualer
18 Oktober 2024
12 Oktober 2024
4 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
29 September 2024
26 September 2024
25 September 2024