Black And Decker AS255 Bruksanvisning

Black And Decker Järn AS255

Läs nedan 📖 manual på svenska för Black And Decker AS255 (15 sidor) i kategorin Järn. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/15

Please Read and Save this Use and Care Book

Por favor lea este instructivo antes de usar el producto

Veuillez lire et conserver ce guide d’entretien et d’utilisation

Steam Xpress™

Iron

Plancha

Fer

Accessories/Parts (USA/Canada)

Accesorios/Partes (EE.UU/Canadá)

Accessoires/Pièces (É.-U./Canada)

1-800-738-0245

USA/Canada 1-800-231-9786

Mexico 01-800-714-2503

www.blackanddecker.com Model

Modelo

Modèle

❑

AS255

When using your iron, basic safety precautions should always be followed,

including the following:

❑

READ ALL INSTRUCTIONS BEFORE USING.

❑Use iron only for its intended use.

❑To protect against a risk of electric shock, do not immerse the iron in water

or other liquid.

❑The iron should always be turned off (refer to "How to Use" section) before

plugging into or unplugging from an outlet. Never yank cord to disconnect

from outlet; instead grasp plug and pull to disconnect.

❑Do not allow cord to touch hot surfaces. Let iron cool completely before

putting away. Loop cord loosely around cord wrap when storing.

❑Always disconnect iron from electrical outlet when filling with or emptying

of water, and when not in use.

❑Do not operate iron with a damaged cord or if the iron has been dropped

or damaged. To avoid the risk of electric shock, do not disassemble the

iron, take it to a qualified serviceman for examination and repair. Or, call

the appropriate toll-free number listed on the cover of this manual. Incorrect

reassembly can cause a risk of electric shock when the iron is used.

❑

Close supervision is necessary for any appliance being used by or near

children. Do not leave iron unattended while connected or on an

ironing board.

❑

Burns can occur from touching hot metal parts, hot water, or steam.

Use caution when you turn a steam iron upside down or use the surge

of steam — there may be hot water in the water tank. Avoid rapid

movement of iron to minimize hot water spillage.

SPECIAL INSTRUCTIONS

❑

To avoid a circuit overload, do not operate another high-wattage

appliance on the same circuit.

❑

If an extension cord is absolutely necessary, a 10-ampere cord should

be used. Cords rated for less amperage may overheat. Care should be

taken to arrange the cord so that it cannot be pulled or tripped over.

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS.

Soft-Touch Parts

Note: The soft-touch parts of this unit are free of natural rubber and latex.

They are safe for individuals allergic or sensitive to these materials.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To reduce

the risk of electric shock, this plug will fit into a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent

removal of the outer cover. To reduce the risk of fire or electric shock, do not

attempt to remove the outer cover. There are no user-serviceable parts inside.

Repair should be done only by authorized service personnel.

Note: If the power supply cord is damaged, it should be replaced by qualified

personnel or in Latin America by an authorized service center.

How to Use

This appliance is for household use only.

GETTING STARTED

Remove any labels, stickers or tags attached to the body or soleplate of the iron.

Note: Use ordinary tap water for ironing. Do not use water processed through a

home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before

beginning to iron.

IRONING WITH STEAM

Filling Water Tank

1. Open the water-fill cover (A).

2. Tilt the iron and using a clean measuring cup, pour water

into opening until the water reaches the MAX level mark

on the water tank . Do not overfill.(B)

3. Close the water-fill cover.

4. Plug in the iron. The temperature-ready light glows (C).

Tip: If unsure of a garment’s fiber, test a small area (on an

inside seam or hem) before ironing.

5. Move the dry/steam selector to the desired steam

level .(D)

6. Turn the fabric-select dial to appropriate steam setting

(between 4 and 6) for your fabric . Read garment’s label(E)

to help you determine fabric type.

• The temperature-ready light glows until it reaches the

appropriate temperature.

• It then glows on and off during ironing. This is normal.

7. When finished ironing, turn the fabric-select dial to lowest

heat setting, move the dry/steam selector to and

unplug the iron.

Product may vary slightly from what is illustrated.

1. Spray nozzle

2. Water-fill cover

3. Dry/steam selector

4. Spray button

5. Steam button

6. Temperature-ready and auto shutoff light

7. Comfort Grip™ handle

8. 360° pivoting cord

9. Heel rest

10. Fabric-select dial

11. AUTO CLEAN®button

12. Water tank

13. Soleplate

Steam

Spray

Dry

Symbols

























Produktspecifikationer

Varumärke:	Black And Decker
Kategori:	Järn
Modell:	AS255
Färg på produkten:	Zwart
Vikt:	750 g
Bredd:	250 mm
Djup:	220 mm
Höjd:	70 mm
LED-indikatorer:	Bezig met opladen
På / Av knapp:	Ja
Anslutningsteknik:	Bedraad
DC-spänningsingång:	15 V
Ljudutgångskanaler:	- kanalen
Signal-brusförhållande:	- dB
Total harmonisk distorsion (THD):	- procent
AC-ingångsspänning:	230 V
Toppeffekt per kanal:	- W
Anslutningstyp för högtalare:	3.5mm