Black And Decker BAT20-716 Bruksanvisning
Black And Decker
Skruvmaskin
BAT20-716
Läs nedan 📖 manual på svenska för Black And Decker BAT20-716 (36 sidor) i kategorin Skruvmaskin. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/36
Dwg Name: BAT20-716-1390168ART Dwg No: 1390168
ECO No: Pkg Dwg Ref: 24454 1290522 Rev: A
Color Reference: N/A
INSTRUCTION MANUAL
FRANÇAIS pg. 25
ESPAÑOL pg. 13
Cordless Impact Wrench
• 20V Lithium Ion
• 7/16" (11 mm) Quick-Release Chuck
• 500 ft-lbs Torque
• 0 – 1900 RPM
ENGLISH
BAT20-716
BAT20-7161
BAT20-716-1390168ART.indd 1 2/1/2017 5:26:57 PM
Dwg Name: BAT20-716-1390168ART Dwg No: 1390168
ECO No: Pkg Dwg Ref: 24454 1290522 Rev: A
Color Reference: N/A
2
ENGLISH
GENERAL SPECIFICATIONS
Klein Tools BAT20-716 is an impact wrench designed for professional impact fastening
and drilling applications. The impact function makes this tool particularly useful for driving
fasteners in wood, metal and concrete.
• Power Source: 20V Li-Ion battery
• Speed: Variable, 0 – 1900 RPM
• Torque: Up to 500 ft. lbs. (69.1 kg-m)
Specifications subject to change.
ATrigger switch FBattery release button
BForward/reverse button GFuel gauge button
C7/16" (11 mm) Hex quick-release chuck HLift ring
DMain handle ISide warning label
EBattery pack JBack warning label
FEATURE DETAILS
NOTE: There are no user-serviceable parts inside.
FEATURE DETAILS
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ............. Volts A .................Amperes
Hz Watts ........... Hertz W ................
min Minutes ......... or AC Alternating current ....
or DC direct current or AC/DC Alternating or..... ......
........... Class I Construction direct current
...................
(grounded) no ...............No load speed
........... Class II Construction n .................Rated speed
(double insulated) ...............Earthing terminal
…/min .... Per minute ..............Safety alert symbol
BPM ........ Beats per minute ..............Visible radiation
IPM ......... Impacts per minute RPM Revolutions per minute ...........
sfpm ....... Surface feet per minute SPM Strokes per minute ...........
C
I
J
G
A
B
D
E
F
H
BAT20-716-1390168ART.indd 2 2/1/2017 5:27:00 PM
Dwg Name: BAT20-716-1390168ART Dwg No: 1390168
ECO No: Pkg Dwg Ref: 24454 1290522 Rev: A
Color Reference: N/A
3
ENGLISH
DEFINITIONS
The definitions below describe the level of severity for each signal word:
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not
avoided, may result in property damage.
WARNINGS
• use under wet conditions or in presence of flammable liquids or gases.DO NOT
• This impact wrench is a professional power tool. let children come into DO NOT
contact with the tool. Supervision is required when inexperienced operators use
this tool.
• Never modify the power tool or any part of it. Damage or personal injury could result.
SAFETY
2) Electrical Safety:
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault
circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.
3) Personal Safety:
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d)
Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
SAFETY
To ensure safe operation and service of the drill, follow these instructions. Failure to
observe these warnings can result in electric shock, re, severe injury or death.
1) Work Area Safety:
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
BAT20-716-1390168ART.indd 3 2/1/2017 5:27:00 PM
Produktspecifikationer
| Varumärke: | Black And Decker |
| Kategori: | Skruvmaskin |
| Modell: | BAT20-716 |
Behöver du hjälp?
Om du behöver hjälp med Black And Decker BAT20-716 ställ en fråga nedan och andra användare kommer att svara dig
Skruvmaskin Black And Decker Manualer
10 Oktober 2024
26 September 2024
23 September 2024
22 September 2024
23 Augusti 2024
21 Augusti 2024
16 Augusti 2024
13 Augusti 2024
9 Augusti 2024
6 Augusti 2024
Skruvmaskin Manualer
- Skruvmaskin Bosch
- Skruvmaskin AEG
- Skruvmaskin DeWalt
- Skruvmaskin Silverline
- Skruvmaskin Ferm
- Skruvmaskin Ozito
- Skruvmaskin Gude
- Skruvmaskin Makita
- Skruvmaskin Vonroc
- Skruvmaskin Stanley
- Skruvmaskin Skil
- Skruvmaskin Yato
- Skruvmaskin Hilti
- Skruvmaskin Ryobi
- Skruvmaskin Festool
- Skruvmaskin Metabo
- Skruvmaskin Parkside
- Skruvmaskin Worx
- Skruvmaskin Meec Tools
- Skruvmaskin Milwaukee
- Skruvmaskin Hikoki
- Skruvmaskin Tacklife
- Skruvmaskin Hazet
- Skruvmaskin Einhell
- Skruvmaskin Maktec
- Skruvmaskin Steren
- Skruvmaskin Craftsman
- Skruvmaskin Power Craft
- Skruvmaskin Powerplus
- Skruvmaskin Porter-Cable
- Skruvmaskin Cotech
- Skruvmaskin Beta
- Skruvmaskin Kraftwerk
- Skruvmaskin Powerfix
- Skruvmaskin Matrix
- Skruvmaskin Kress
- Skruvmaskin Fieldmann
- Skruvmaskin Basetech
- Skruvmaskin Laserliner
- Skruvmaskin Truper
- Skruvmaskin Cocraft
- Skruvmaskin Meister Craft
- Skruvmaskin Toolcraft
- Skruvmaskin Batavia
- Skruvmaskin Fein
- Skruvmaskin Park Tool
- Skruvmaskin Elu
- Skruvmaskin Goon
- Skruvmaskin Sthor
- Skruvmaskin Wiha
- Skruvmaskin Alpha Tools
- Skruvmaskin SW-Stahl
- Skruvmaskin Cleco
- Skruvmaskin MSW
- Skruvmaskin Weidmüller
- Skruvmaskin Einhell Bavaria
- Skruvmaskin Wera
- Skruvmaskin Rodcraft
- Skruvmaskin Ingersoll Rand
- Skruvmaskin Bavaria By Einhell
- Skruvmaskin Chicago Pneumatic
- Skruvmaskin Facom
- Skruvmaskin TAURUS Titanium
Nyaste Skruvmaskin Manualer
27 Oktober 2024
24 Oktober 2024
20 Oktober 2024
18 Oktober 2024
17 Oktober 2024
15 Oktober 2024
12 Oktober 2024
7 Oktober 2024
5 Oktober 2024
5 Oktober 2024