Black And Decker BDCMTO Bruksanvisning

Black And Decker Multiverktyg BDCMTO

Läs nedan 📖 manual på svenska för Black And Decker BDCMTO (28 sidor) i kategorin Multiverktyg. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/28

INSTRUCTION MANUAL

OSCILLATING TOOL

ATTACHMENT

Thank you for choosing BLACK+ ! DECKER

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR

ANY REASON.

If you have a question or experience a problem with your BLACK+ DECKER

purchase, go to http://www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call

1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.

Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPA OL EN LA CONTRAPORTADA.N

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

CATALOG NUMBERS

BDCMTO,

BDCMTOA

To register your new product, visit

www.BlackandDecker.com/NewOwner

WARNING:

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

WARNING: Read all safety warnings and all instructions provided with

your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using

this attachment. Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

SPECIFIC SAFETY RULES

• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting

accessory may contact hidden wiring or its own cord.Cutting accessory contacting a “live” wire

may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

• Use clamps or another practical way to secure and support theworkpiece to a stable platform.

Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

• Disconnect power before using tool near live wires or where there may be hidden wiring. 

Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool

“live” and could give the operator an electric shock.” Always check for hidden wiring, gas

lines, or other utilities before performing any material cutting or removal operations with the tool.

• .Wait for the cutter to stop before setting the tool down An exposed cutter may engage

the surface leading to possible loss of control and serious injury.

• Do not operate this tool for long periods of time. Vibration caused by the operating action

of this tool may cause permanent injury to fingers, hands, and arms. Use gloves to provide

extra cushion, take frequent rest periods, and limit daily time of use.

• Always hold the tool rmly with both hands for maximum control. Keep proper footing and

balance at all times. This enables better control of the power tool in unexpected situations.

• Do not restart the cutting operation in the workpiece. Let the tool reach full speed and

carefully re-enter the cut.

• Do not “jam” the cut-off saw blade or apply excessive pressure. Do not attempt to make

an excessive depth of cut.

• Keep your hands away from cutting area. Do not reach under the material being cut.

• Do not use dull or damaged blades. Bent blade can break easily or cause kickback.

Exercise extreme caution when handling the accessories. The accessories are very sharp.

Wear protective gloves when changing cutting accessories. Accessories become hot after

prolonged usage.

• Before scraping, check workpiece for nails. If there are nails, either remove them or set

them well below intended finished surface. Striking a nail with accessory edge could cause

the tool to jump.

• Do not wet sand with this tool. Liquids entering the motor housing are an electrical shock hazard.

• Never work in area which is soaked with a liquid, such as a solvent or water, or

dampened such as newly applied wallpaper. There is an electrical shock hazard when

working in such conditions with a power tool and heating of the liquid caused by scraping

action may cause harmful vapors to be emitted from workpiece.

• Do not use sandpaper intended for larger sanding pads. Larger sandpaper will extend

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: DANGER, WARNING, OR CAUTION. Indicates 

Maybeusedinconjunctionwithothersymbolsorpictographs.

DANGER: Indicateshazardoussituationwhich,ifnotavoided,willresultindeathorseriousinjury.

WARNING: Indicateshazardoussituationwhich,ifnotavoided,couldresultindeathor

seriousinjury.

CAUTION: Indicatesahazardoussituationwhich,ifnotavoided,couldresultinminoror

moderateinjuryorpropertydamage.

beyond the sanding pad causing snagging, tearing of the paper or kick-back. Extra paper

extending beyond the sanding pad can also cause serious lacerations.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses.

Also use face or dust mask. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

•

ANSI Z87.1 eye protection (CAN/CPA Z94.3),

•

ANSI S12.6 (S3.19) hearing protection,

•

NOSH/OSHA respiratory protection.

WARNING:Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to the state of California to cause cancer,

birth defects or other reproductive harm. Some examples of these chemicals are:

•

lead from lead-based paints,

 •

crystalline silica from bricks and cement and other masonry products, and

 •

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well ventilated area, and work with approved safety

equipment, such as those dust masks that are specially designed to lter out microscopic particles.

•

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and

other construction activities. Wear protective clothing and wash exposed areas with

soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote

absorption of harmful chemicals.

WARNING:Use of this tool can generate and/or disperse dust, which may cause serious

and permanent respiratory or other injury. Always use NOSH/OSHA approved respiratory

protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING:Always wear proper personal hearing protection that conforms to ANSI

S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

PRECAUTIONS TO TAKE WHEN SANDING PAINT

  1.SandingofleadbasedpaintisNOTRECOMMENDEDduetothedifficultyofcontrollingthe

 contaminateddust.Thegreatestdangerofleadpoisoningistochildrenandpregnantwomen.

  2.Sinceitisdifficulttoidentifywhetherornotapaintcontainsleadwithoutachemical

 analysis,werecommendthefollowingprecautionswhensandinganypaint:

PERSONAL SAFETY

  1.Nochildrenorpregnantwomenshouldentertheworkareawherethepaintsandingis

beingdoneuntilallcleanupiscompleted.

  2.Adustmaskorrespiratorshouldbewornbyallpersonsenteringtheworkarea.Thefilter

shouldbereplaceddailyorwheneverthewearerhasdifficultybreathing.Seeyourlocal

hardwarestorefortheproperN.I.O.S.H.approveddustmask.

  3.NOEATING,DRINKINGorSMOKINGshouldbedoneintheworkareatoprevent

ingestingcontaminatedpaintparticles.WorkersshouldwashandcleanupBEFORE

eating,drinkingorsmoking.Articlesoffood,drink,orsmokingshouldnotbeleftinthe

workareawheredustwouldsettleonthem.

ENVIRONMENTAL SAFETY

  1.Paintshouldberemovedinsuchamannerastominimizetheamountofdustgenerated.

  2.Areaswherepaintremovalisoccurringshouldbesealedwithplasticsheetingof4milsthickness.

  3.Sandingshouldbedoneinamannertoreducetrackingofpaintdustoutsidetheworkarea.

CLEANING AND DISPOSAL

  1.Allsurfacesintheworkareashouldbevacuumedandthoroughlycleaneddailyforthe

durationofthesandingproject.Vacuumfilterbagsshouldbechangedfrequently.

  2.Plasticdropclothsshouldbegatheredupanddisposedofalongwithanydustchipsor

otherremovaldebris.Theyshouldbeplacedinsealedrefusereceptaclesanddisposedof

throughregulartrashpick-upprocedures.Duringcleanup,childrenandpregnantwomen

shouldbekeptawayfromtheimmediateworkarea.

  3.Alltoys,washablefurnitureandutensilsusedbychildrenshouldbewashedthoroughly

beforebeingusedagain.

Produktspecifikationer

Varumärke:	Black And Decker
Kategori:	Multiverktyg
Modell:	BDCMTO

Behöver du hjälp?

Om du behöver hjälp med Black And Decker BDCMTO ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Multiverktyg Black And Decker Manualer

Black And Decker MT18 Bruksanvisning

27 Oktober 2024

Black And Decker Matrix BDCDMT120IA Bruksanvisning

21 September 2024

Black And Decker MTOS4 Bruksanvisning

25 Augusti 2024

Black And Decker BDCOS18 Bruksanvisning

25 Augusti 2024

Black And Decker MT280 Bruksanvisning

20 Augusti 2024

Black And Decker MT1435 Bruksanvisning

19 Augusti 2024

Black And Decker HPL108 Bruksanvisning

17 Augusti 2024

Black And Decker MT300SA2 Bruksanvisning

16 Augusti 2024

Black And Decker KA280 Bruksanvisning

15 Augusti 2024

Black And Decker MT300KA Bruksanvisning

14 Augusti 2024

Multiverktyg Manualer

Nyaste Multiverktyg Manualer

Dremel 8250 Bruksanvisning

30 Mars 2025

Kraftronic KT-MT 250 Bruksanvisning

29 Mars 2025

Lezyne Dual Insert Kit Bruksanvisning

18 Februari 2025

EGO PH1400E Bruksanvisning

3 Februari 2025

Workzone WZMS 10,8 Li Bruksanvisning

1 Januari 2025

Einhell TE-MG 18/1 Li Bruksanvisning

31 December 2025

EGO MRC2306E Bruksanvisning

29 December 2024

Alpha Tools A 180 Bruksanvisning

29 December 2024

Powerblade PC4MT5 Bruksanvisning

10 December 2024

Einhell TE-MG 200 E Bruksanvisning

9 December 2024