Black And Decker HT500 Bruksanvisning

Black And Decker Brödrost HT500

Läs nedan 📖 manual på svenska för Black And Decker HT500 (12 sidor) i kategorin Brödrost. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

3 4

HT420-HT500

* Advertencia: Léase este instructivo antes de usar el producto!

MANUAL DE INSTRUCCIONES

MANUAL DE INSTRUÇÕES

INSTRUCTION MANUAL

Doc No: 477435-02-PDF1

REV : 0

VERSION : 1

EC :EC0720303

TITLE : MANUAL HT SERIES

REL

ENGLISH

Intended use

Your Black & Decker hedgetrimmer has been designed for

trimming hedges, shrubs and brambles. This tool is intended

for consumer use only.

Safety instructions

◆Warning! When using mains-powered tools, basic safety

precautions, including the following, should always be

followed to reduce the risk of fire, electric shock, personal

injury and material damage.

◆Read all of this manual carefully before operating the tool.

◆Retain this manual for future reference.

◆Remove the plug from the socket before carrying out any

adjustment, servicing or maintenance.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or

wet conditions. Keep the work area well lit. Do not use the

tool where there is a risk of causing fire or explosion, e.g. in

the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool or mains cable.

Dress properly

Do not wear loose clothing or jewellery, as these can be

caught in moving parts. Preferably wear rubber gloves and

non-slip footwear when working outdoors. Wear protective

hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever

the operations may produce dust or flying particles.

Hearing protection should be worn.

Guard against electric shock

Prevent body contact with earthed or grounded surfaces

(e.g. pipes, radiators, cookers and refrigerators). Electric safety

can be further improved by using a high-sensitivity

(30 mA / 30 mS) residual current device (RCD).

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it

frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction

and collection facilities, ensure that these are connected and

properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed

from the tool before operating the tool.

Extension cables

Before use, inspect the extension cable and replace if damaged.

When using the tool outdoors, only use extension cables

intended for outdoor use. Up to 30 m of Black & Decker

extension cable can be used without loss of power.

Use appropriate tool

The intended use is described in this instruction manual.

Do not force small tools or attachments to do the job of a

heavy-duty tool. The tool will do the job better and safer at the

rate for which it was intended. Do not force the tool. Do not

use the tool for purposes not intended, for example, do not

use a circular saw to cut tree limbs or logs.

Warning! The use of any accessory or attachment or

performance of any operation with this tool other than those

recommended in this instruction manual may present a risk of

personal injury.

Check for damaged parts

Before use, carefully check the tool and mains cable for

damage. Check for misalignment and seizure of moving parts,

breakage of parts, damage to guards and switches and any

other conditions that may affect its operation. Ensure that the

tool will operate properly and perform its intended function.

Do not use the tool if any part is damaged or defective. Do not

use the tool if the switch does not turn it on and off. Have any

damaged or defective parts repaired or replaced by an

authorised repair agent. Never attempt any repairs yourself.

Unplug the tool

Unplug the tool when it is not in use, before changing any parts

of the tool, accessories or attachments and before servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch.

Be sure that the tool is switched off when plugging in.

Do not abuse cord

Never carry the tool by its cord or pull it to disconnect from the

socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools should be stored in a dry, locked up or

high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer

performance. Follow the instructions for maintenance and

changing accessories. Keep handles and switches dry, clean

and free from oil and grease.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using

original spare parts; otherwise this may result in considerable

danger to the user.

Produktspecifikationer

Varumärke:	Black And Decker
Kategori:	Brödrost
Modell:	HT500
Färg på produkten:	Zwart
Vikt:	4000 g
Bredd:	438 mm
Djup:	254 mm
Höjd:	44 mm
AC-adapterfrekvens:	50 - 60 Hz
AC-adapterns inspänning:	110 - 240 V
Videolägen som stöds:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Certifiering:	CE, FCC, UL, LVD
HDCP:	Ja
Anslutning för nätadapter:	Ja
Färgdjup:	12 Bit
Förvaringstemperatur:	-20 - 60 °C
Ljudutgångskanaler:	7.1 kanalen
AC-adapter, utspänning:	24 V
HDMI in:	4
Maximalt avstånd:	10 m
Bandbreedte:	18 Gbit/s
Antal HDMI-utgångar:	4
RJ-45 ingångsportar:	1
Videoanslutning:	HDMI
Rackkapacitet:	1U
Strömförbrukning (typiskt):	30 W
Drifttemperatur (TT):	0 - 50 °C
Relativ luftfuktighet i drift (VV):	20 - 90 procent
Ingångsström AC-adapter:	2.7 A