Black And Decker WM125 Bruksanvisning

Läs nedan 📖 manual på svenska för Black And Decker WM125 (24 sidor) i kategorin Sågmaskin. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
INSTRUCTION MANUAL
Catalog Number
WM125
INSTRUCTIVO DE OPERACN, CENTROS DE SERVICIO Y LIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
If you cant find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.
Please have the catalog number available when you call.
for instant answers 24 hours a day.
WORKMATE®125
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
90555796 WM125.qxd:??????-00 BDL500 laser 9/25/09 12:44 PM Page 1
2
Workmate®Work Center Warnings:
1. Do not load with more than 350 pounds. (160 kg)
2. Do not apply an unbalanced load which could cause the Work Center to tip over.
3. Do not use the Work Center as a stepladder or standing platform.
Do not use the lower cross brace as a step. The cross brace is a foot REST only.
4. Do not store work center outdoors or in a damp location.
5. Avoid applying excessive force when clamping with the swivel pegs.
6. Be sure that the legs are fully open, locked in position and secured via the locking
knobs.
7. When using a power tool with the Work Center, follow the safety instructions in the
toolʼs instruction manual.
8. Always wear safety glasses when operating power tools.
9. Never mount power tools directly in vise jaws; pressure may damage tools.
10. An even pressure of the vise jaws on the workpiece is essential. Tighten both crank
handles uniformly.
11. Support overhanging loads to prevent tipping.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual.
The information it contains relates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
Assembly Instructions
NOTE: For assembly of the WM125 Workmate®you will need a hammer, flat bladed
screwdriver and the provided nut driver part (U). Assembly time is approximately 45
minutes to one hour. Follow the sequence shown in the diagrams and described in
the steps below.
STEP 1:
Empty the contents of the box and identify all components.
1
90555796 WM125.qxd:??????-00 BDL500 laser 9/25/09 12:44 PM Page 2
3
STEP 2:
Empty the contents of the parts pack and identify all components.
STEP 3:
Guide carriage bolt (D) through slot in vise bracket of assembly (L), spacer (F) outer
leg (T) and secure with locking knob (E). Repeat this step using assembly (R).
STEP 4:
Place the rear bracket (Z) over the legs,
align holes and secure with Pan Head
bolt, M6 x 30mm (C) and M6 nut (A).
Use flat bladed screwdriver and nut
driver (U) to secure.
2
D
F
E
R
D
F
E
T
T
3
4
90555796 WM125.qxd:??????-00 BDL500 laser 9/25/09 12:44 PM Page 3

Produktspecifikationer

Varumärke: Black And Decker
Kategori: Sågmaskin
Modell: WM125

Behöver du hjälp?

Om du behöver hjälp med Black And Decker WM125 ställ en fråga nedan och andra användare kommer att svara dig




Sågmaskin Black And Decker Manualer

Sågmaskin Manualer

Nyaste Sågmaskin Manualer