Black And Decker XT1820 Bruksanvisning

Läs nedan 📖 manual på svenska för Black And Decker XT1820 (23 sidor) i kategorin Järn. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/23
1
www.blackanddecker.com
9 10 11
123
456
78
13
12
English 3
Italiano 6
Español 11
Português 15
∂ÏÏËÓÈη 19
2
7
A
3
ENGLISH
Intended use
Your Black & Decker iron has been designed for ironing
garments made of linen, cotton, silk, wool and synthetic
materials. This product is intended for household use only.
Safety instructions
Warning! When using mains-powered appliances, basic
safety precautions, including the following, should always
be followed to reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before using the appliance.
The intended use is described in this manual. The use of
any accessory or attachment or the performance of any
operation with this appliance other than those
recommended in this instruction manual may present a
risk of personal injury.
Retain this manual for future reference.
Using your appliance
Always take care when using the appliance.
Do not use the appliance outdoors.
Do not operate the appliance if your hands are wet.
Do not operate the appliance if you are barefoot.
Guide the power supply cord neatly so it does not hang
over the edge of a worktop and cannot be caught
accidentally or tripped over.
Never pull the power supply cord to disconnect the plug
from the socket. Keep the power supply cord away from
heat, oil and sharp edges.
If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.
Disconnect the appliance from the power supply when not
in use and before cleaning.
Safety of others
Do not allow children or any person unfamiliar with these
instructions to use the appliance.
Do not allow children or animals to come near the work
area or to touch the appliance or power supply cord.
Close supervision is necessary when the appliance is
used near children.
After use
Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
appliance.
When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Inspection and repairs
Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or defective.
Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
Before use, check the power supply cord for signs of
damage, ageing and wear.
Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
If the power supply cord or mains plug is damaged or
defective it must be repaired by an authorised repair
agent in order to avoid a hazard. Do not cut the power
supply cord and do not attempt to repair it yourself.
Never attempt to remove or replace any parts other than
those specified in this manual.
Electrical safety
Always check that the mains voltage corresponds to the
voltage on the rating plate.
This product must be earthed.
Do not immerse the appliance, power supply cord
or plug in water or other liquid.
If it is necessary to use an extension cable,
use an approved 3-core cable suitable for the
power input of this product (see rating plate).
Additional safety instructions for irons
Always route the cord carefully to avoid a tripping hazerd.
Do not use the appliance near water.
Do not place the appliance near heat sources or directly
under cabinets. Do not use the appliance in the presence
of explosive or flammable materials.
The filling apperture must not be opened during use.
Steam may escape from the soleplate.
Surfaces may be hot during use and during the cooldown
period.
Set the temperature control dial to the min position
before plugging in or out.
Let the appliance cool down before leaving it unattended
and before cleaning or inspecting any parts of the
appliance.
The power supply cord should not touch the hot soleplate
during use or during the cool down period.
Do not touch the soleplate until it has cooled down.
Wait until the appliance has cooled down before
emptying the water tank as the water may still be hot.
Always diconnect the appliance from the supply before
filling, emptying, cleaning, or carying out any
maintenance on the appliance.

Produktspecifikationer

Varumärke: Black And Decker
Kategori: Järn
Modell: XT1820

Behöver du hjälp?

Om du behöver hjälp med Black And Decker XT1820 ställ en fråga nedan och andra användare kommer att svara dig




Järn Black And Decker Manualer

Järn Manualer

Nyaste Järn Manualer