Block & Block BETA-70 Bruksanvisning

Block & Block Inte kategoriserad BETA-70

Läs nedan 📖 manual på svenska för Block & Block BETA-70 (13 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

BETA-70

User Manual- English

1. INTRODUCTION

Dear client, Thank you for trust on at the time of purchasing your block&block

new BETA-70 lifting tower. Prior to handling, read fully and carefully this manual and

follow the safety instructions to obtain the best result using your new tower.

Use only original replacements from block&block. To do so, you should always

buy from authorized distributor. If non-original pieces were used or modications an

to the tower were made the user would lose their guarantee rights. For any other

repair or inquiry you must always indicate the serial number of your lifting tower.

To guarantee maximum security in the usage of BETA-70 lifting tower, you

should carry out an annual revision in an authorized service centre by block&block,

where they will check the state of the tower in general and the wires, the winch and

the lock-security in particular.

BLOCK&BLOCK reserves the right to modify the specications and the

pieces of this product without previous notice.

2. TECHNICAL INFORMATION

BETA-70 telescopic lifting tower has been designed to lift trusses at

dierent heights. On those trusses lighting and sound systems can be hanged.

2.1- BETA-70 lifting tower

2.2- Designed to lift vertically lighting and sound systems at dierent heights.

2.3- Maximum load 0 kg (507 : 23 lb).

2.4- Minimum load: 25 Kg (55 lb).

2,5- Maximum height: 6,5 m (21.32 ft).

2.6- Minimum height: 1,80 m (5.90 ft).

2.7- Base area: 2,52 2,52 m (8.26 x8.26 x ft).

2.8- Tower weight: 93 kg (205 lb).

2.9- Insertion diametre: Ø 38 mm

22.10- Construction material: Steel Prole of carbon type S- -J0H manufactured 275

according to EN 10219 and EN10305.5 standards.

2.11- System composed of three telescopic proles powered manually by a winch

with a steel wire of 6mm and guided by steel pulley with ball bearing.

2.12- Winch: 510 kg of maximum load with automatic brake of load holding.

Declaration of conformity CE, applied standards harmonized DIN EN 13157, EN

13157, EN 12100 I and II, machine directive 2006/42/CE.

2.13- Galvanized steel wire of 6x19+1 type manufactured according to EN 13414-

1:2004 standards, 1770 N/mm2 resistance. Wire diameter: 6 mm.

2.14- Safety mechanical triggers to block the section at dierent height s.

2.15- Safety triggers in the base to anchor the legs.

2.16- Stabilizer legs adjustable by means of threaded rod and steel plates with base

of anti-slipping rubber.

2.17- Antioxidant protection, primered with paint made of resins of epoxy and stove-

finished.

2.18- Bubble level to adjust the verticality of the tower.

2.19- Directional wheels to transport the lift folded.

2.20- Power supply ground terminal

3. SAFETY INSTRUCTIONS

3.1- The ground of installation for the tower must be solid and at.

3.2- Check the legs are rmly placed on the base by means of automatic triggers.

3.3- Level the machine before lifting. You should level it using the leg stabilizer and

check the levelling with the bubble level included in the tower pack.

3.4- Before loading the lift, check that all the sections are folded and blocked by

means of lock-security.

3.5- Before lifting and to assure the proper function of the winch brakes, check the

tower always holds a minimum load of 25kg.

Produktspecifikationer

Varumärke:	Block & Block
Kategori:	Inte kategoriserad
Modell:	BETA-70
Enhetsplacering:	Vrijstaand
Färg på produkten:	Zilver
Bredd:	598 mm
Djup:	599 mm
Höjd:	842 mm
Typ av laddare:	Voorbelading
Torksystem:	Warmtepomp
Wi-Fi-kontroll:	Nee
Ljudnivå:	64 dB
Energie-efficiëntieklasse:	A++
Nominell kapacitet:	8 kg