Braemar Ecostar WF30 Bruksanvisning

Braemar Värmare Ecostar WF30

Läs nedan 📖 manual på svenska för Braemar Ecostar WF30 (2 sidor) i kategorin Värmare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Warranty Service

Australia 1-300-650-644

seeleyinternational.com

612195M AU 110

seeleyinternational.com.au

(English) (WF30/40)

OWNER’S MANUAL

Wall Furnace - WF30/40

Name of Technician and company

(Print)

Signature of Technician

Date of attendance

Year 2 4 86 10

Maintenance Schedule

Cabinet and components

Cabinet

Heat exchanger

Electrical connections

Combustion air inlet louvres

Electrical

Electrical wiring

Room fan motor / impellor

Thermocouple voltage

Overtemp switch

Operation

Start up and run sequence

Control operation

Complete ignition

Gas inlet pressure

Gas test point pressure High

General installation

Rear register

Flue system, cowl

Gas, burners, ignition

Main burner and injector

Pilot gas rate

Pilot ignition / ignition electrode

Gas test point pressure Low

Thermostat operation

Draught diverter (NOTE 1)

kPa

Action taken key:

= Inspected and working correctly no action required

A = Adjustment of part

C = Cleaning of part

R = Replaced part

Pilot burner and injector

It is a condition of your warranty cover that the items in the Schedule below are checked (and action taken as required)

every two (2) years after the date of installation by a qualified, licenced technician, and that the Schedule is properly

filled out (ie names, signature, date, and action taken). Even after the warranty period expires, please continue to have

the product maintained every two years as per the items in the Schedule. This will help to prolong the life of the product

and keep it running efficiently.

It is the policy of Seeley International to introduce continual product improvement. Accordingly, specifications are subject to change without notice.

Please consult with your dealer to confirm the specifications of the model selected.

To owner/user: please note that as explained in your Warranty Card, installation is not covered by the warranty (for example, electrical and gas

connections to the Wall Furnace). However, we still require that you have these things checked, because they can affect the performance (and/or

safety) of the heater. This is why we have included them in the Maintenance Schedule. Further, routine maintenance may be required more

frequently in non-domestic applications or when operating in adverse environmental situations. It is your obligation to ensure that you comply with

these requirements.

Electrical and gas connections

NOTE 1:

Check operation of flue and draft diverter in accordance with detailed instructions included in AS/NZS 56001.

SEELEY INTERNATIONAL – OWNER’S MANUAL 2

Introduction

For satisfactory performance of your

Braemar gas wall furnace, please read

these instructions carefully. The

operation of the heater is controlled by

the gas control knob and fan switch

located behind the access door on the

front cover.

Fan Operation

The fan will start automatically in both

AUTO and BOOST positions when the

unit is warm enough after the burner is

turned on, and stop automatically when

the unit has cooled sufficiently after the

burner turns off. With AUTO selected

the unit will automatically select

between "low" and "normal" (and

“boost” on 40MJ models) fan speeds

based on the heated air temperature -

no further user adjustment is necessary.

When BOOST is selected the fan will

run only on its boost speed. It is

recommended that the manual fan

switch be set to AUTO for normal

operation, or BOOST for rapid heat-up.

Gas Control

To light the heater:

- Turn the gas control knob anti-

clockwise from the “0” position to the

position.

- Depress knob fully and hold down.

- Press the igniter button located next to

the gas control knob 3-4 times.

- Observe the pilot meter to indicate

operation of the pilot.

- Wait 20 seconds then release the gas

control knob and check the pilot meter

stays on.

- Repeat the process if required.

OPERATING INSTRUCTIONS

1 WF30/40

Gas control knob

Igniter button

Pilot meter

Fan

Auto / Boost

switch

IMPORTANT MAINTENANCE (AND WARRANTY) INFORMATION

As with any product that has moving parts or is subject to wear and tear, it is VERY

IMPORTANT that you maintain your wall furnace and have it regularly serviced. It is a

condition of warranty cover for your wall furnace that you comply with all of the maintenance

and service requirements set out in this Owner’s Manual. Compliance with these

requirements will prolong the life of your wall furnace. Further, it is also a condition of

warranty cover that each item in the Maintenance Schedule in this Owner’s Manual is

performed with the frequency indicated, by a qualified, licensed technician, and that the

Maintenance Schedule is properly filled out (ie names, signature, date, and action taken)

when the item is completed. ANY FAILURE TO CARRY OUT THE REQUIRED

MAINTENANCE AND SERVICING REQUIREMENTS, AND ANY FAILURE TO PROPERLY

FILL OUT THE MAINTENANCE SCHEDULE, WILL VOID YOUR WARRANTY.

Warning

DO NOT: Place articles on or against this appliance.

DO NOT: Use or store flammable materials near this appliance

DO NOT: Spray aerosols in the vicinity of this appliance while it is in operation.

DO NOT: Modify this appliance.

IMPORTANT

If for any reason your heater experiences,

a POWER FAILURE, the “Pilot Flame” is

TURNED OFF, or GOES OUT, a period of up to

5 minutes is required for the heater to reset.

If the heater has not reset, the

“Gas control knob” will NOT turn easily.

PLEASE DO NOT FORCE

Damage to the mechanism may occur.

Care Instructions

External surfaces should be cleaned with warm water and detergent with the heater turned off.

Do not use abrasive cleaners as scratching of the surface will occur.

Heat Setting

- Turn gas control knob anti-clockwise to

desired heat setting between “1” and

“7”.

- The heater will automatically adjust the

gas flow to maintain the room

temperature corresponding to the

selected heat setting.

To Increase Heat Setting

- Turn gas control knob anti-clockwise

towards “7”.

To Decrease Heat Setting

- Turn gas control knob clockwise

towards “1”.

To Turn Off Main Burner (Pilot-Stand by)

- Turn gas control knob clockwise

to a position between the word PILOT

& the symbol .

(see Figure 1 below)“Pilot zone”

It is recommended that the pilot be

left in operation during the heating

season.

To Turn Off Completely (end of heating

season)

- Turn gas control knob clockwise

to the “0” position.

Figure 1:

To Turn Off Main Burner (Pilot-Stand by)

Heater will now only re-start when control knob

is turned to a heat setting of 1 to 7.

“Pilot zone”

Produktspecifikationer

Varumärke:	Braemar
Kategori:	Värmare
Modell:	Ecostar WF30
Enhetsplacering:	Vrijstaand
Färg på produkten:	Zwart
Dörrgångjärn:	Rechts
Inbyggd display:	Nee
Vikt:	57000 g
Bredd:	550 mm
Djup:	580 mm
Höjd:	1750 mm
Nettoskatt:	- W
Barnlås:	Nee
Ljudnivå:	44 dB
Årlig-energiförbrukning:	256 kWu
Förpackningens vikt:	62000 g
Förpackningens bredd:	575 mm
Djuppackning:	605 mm
Förpackningshöjd:	1803 mm
Energieffektivitetsklass (gammal):	A+
Frys bruttokapacitet:	110 l
Frys nettokapacitet:	104 l
Fryskapacitet:	5 kg/24u
Kylskåpets nettokapacitet:	142 l
Kylskåp med bruttokapacitet:	149 l
No Frost (kylskåp):	Nee
Kylskåp invändig belysning:	Ja
Antal hyllor i kylskåp:	2
Antal-grönsakslådor:	1
Frysläge:	Onder
No Frost (frys):	Nee
Retentionstid vid strömavbrott:	20 uur
Antal fryshyllor:	4
antal stjärnor:	4*
Total nettokapacitet:	246 l
Äggställ:	Ja
Flaskställ:	Ja
Automatisk avfrostning (kylskåp):	Ja
Total bruttokapacitet:	259 l
Hyllmaterial:	Gehard glas
Kylskåpsdörrfickor:	3
Till fackområdet:	Nee
Energianvändning per dag:	0.7 kWh/24u
Klimaatklasse:	ST
Justerbara fötter:	Ja
Iskubshållare:	Ja