Brother HL-6182DW Bruksanvisning

Brother Skrivare HL-6182DW

Läs nedan 📖 manual på svenska för Brother HL-6182DW (9 sidor) i kategorin Skrivare. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/9
Barcode Reference Guide
Version 0
ENG
1
1
1
Overview 1
This reference guide provides information for barcode printing that uses control commands sent directly to a
Brother printing device.
Applicable Brother printing devices:
Brothers HL, MFC and DCP models which are equipped with HP LaserJet (PCL) emulation mode.
If your Brother printing device supports HP LaserJet emulation mode, you can print barcodes in HP LaserJet
emulation mode, Epson FX-850 emulation mode and IBM proprinter FX emulation mode.
Available emulation modes depend on the model number of your printing device. To determine what
emulation mode is supported, see the specification section of that particular printing device’s User's Guide.
Introduction 1
2
2
2
Print barcodes or expanded characters 2
Format: ESC i n ... n \
Creates barcodes or expanded characters according to the segment of parameters ‘n ... n’. For more
information about parameters, see the following Definition of Parameters. This command must end with the
‘ \ code (5CH).
Definition of parameters 2
This barcode command can have the following parameters in the parameter segment (n ... n). As parameters
are effective within the single command syntax ESC i n ... n \, they do not apply in the barcode commands.
If certain parameters are not given, they take the preset settings. The last parameter must be the barcode
data start (‘b’ or ‘B’) or the expanded character data start (‘l’ or ‘L’). Other parameters can be given in any
sequence. Each parameter can start with a lower-case or upper-case character, for example, ‘t0’ or ‘T0’, ‘s3’
or ‘S3’ and so one.
Barcode mode 2
This parameter selects the barcode mode as shown above. When n is ‘t5’ or ‘T5’ the barcode mode (EAN 8,
EAN 13, or UPC A) varies according to the number of characters in the data.
Quick reference for barcode control
commands 2
Code ESC i
Dec 27 105
Hex 1B 69
n = ‘t0’ or ‘T0 CODE 39 (default)
n = ‘t1’ or ‘T1 Interleaved 2 of 5
n = ‘t3’ or ‘T3 FIM (US-Post Net)
n = ‘t4’ or ‘T4 Post Net (US-Post Net)
n = ‘t5’ or ‘T5 EAN 8, EAN 13, or UPC A
n = ‘t6’ or ‘T6 UPC E
n = ‘t9’ or ‘T9 Codabar
n = ‘t12’ or ‘T12 Code 128 set A
n = ‘t13’ or ‘T13 Code 128 set B
n = ‘t14’ or ‘T14 Code 128 set C
n = ‘t130’ or ‘T130 ISBN (EAN)
n = ‘t131’ or ‘T131 ISBN (UPC-E)
n = ‘t132’ or T132 EAN 128 set A
n = ‘t133’ or T133 EAN 128 set B
n = ‘t134’ or T134 EAN 128 set C

Produktspecifikationer

Varumärke: Brother
Kategori: Skrivare
Modell: HL-6182DW

Behöver du hjälp?

Om du behöver hjälp med Brother HL-6182DW ställ en fråga nedan och andra användare kommer att svara dig




Skrivare Brother Manualer

Skrivare Manualer

Nyaste Skrivare Manualer