Canon TC-80N3 Bruksanvisning

Canon Fjärrkontroll TC-80N3

Läs nedan 📖 manual på svenska för Canon TC-80N3 (2 sidor) i kategorin Fjärrkontroll. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

123

Overview

The TC-80N3 Timer/Remote Controller is a programmable

electronic shutter release. When you connect it to your EOS SLR

or DSLR it will allow you to control:

1. when the shutter opens (self-timer mode)

2. how frequently the shutter opens (interval

timer mode)

3. how long the shutter stays open (long-exposure timer

mode)

4. how many exposures the camera will make in total

(exposure count mode)

You can also combine modes: For example, you can program

the controller to wait ve minutes, release the shutter, then take

a total of 25 exposures at ve minute intervals. Refer to the

Combinations Chart for more details.

The TC-80N3 also includes a remote switch that provides the

same functions as your camera’s shutter button (auto-focus, auto-

exposure, and shutter release). When used simply as a remote

release (no timer functions), the TC-80N3 does not require battery

power.

Compatible Cameras

• EOS 1v, 1v-HS, and EOS 3 lm cameras

• All versions of EOS-1D and EOS-1Ds

• EOS D30 and D60

• EOS 10D, 20D, 30D, 40D, 50D, 7D

• EOS 5D and 5D Mark II

Controls and Functions continuous loop. When the

time unit you wish to set is

blinking, turn the Jog Dial to

the amount you want.

3. After setting a time unit,

press the Jog Dial once to

can be set in single digit

increments, up to:

Seconds: 59 Minutes: 59 Hours: 99

4. Repeat Step 3 for any additional time units you wish to set.

Once a time unit has been registered it will no longer blink.

Self-timer Mode

1. Use the Jog Dial to set

the desired delay time.

2. Press the Start/Stop

button to start the self-timer.

The Self-timer icon will start

blinking and the time display will count down. The shutter will

release when the timer reaches zero (0). To pause the self-timer

before the shutter releases, press the Start/Stop button. Press it

again to resume.

• Do not use the TC-80N3 in combination with your

camera’s self-timer. Doing so may interfere with the TC-

80N3's timer function.

• You can combine the self-timer with the Long Exposure

Mode for Bulb exposures. Setting your camera to Bulb will

result in a Bulb exposure only if you have set the the TC-

80N3 to Long Exposure Mode.

• If you combine the Long Exposure Mode and Interval

Timer Mode, both will begin only after the Self-timer delay

has elapsed.

Interval Timer Mode

1. Use the Jog Dial to set the

desired time interval.

2. Press the Start/Stop

button. The camera will

immediately take the rst

exposure. Note: If you want to program a sequence of exposures

at a given interval you must set the exposure count to an amount

greater than one. Subsequent exposures will be at the interval

you have set.

QuickGuide to

Canon TC-80N3

Timer/Remote Controller

Display Panel

Jog Dial

Release Button

Start/Stop

Button

Mode

Button

Display

Illuminator

Button

Battery

Compartment

Plug

Connecting/Disconnecting the TC-80N3

1. Remove your camera’s remote control socket cover and

place it in the holder provided on the back of the TC-80N3.

2. Insert the TC-80N3’s plug into your camera’s remote control

socket by pressing the round black base of the plug. (Note:

Touching the silver collar will prevent the plug from locking.)

To remove the plug, grasp the silver collar and pull outward.

Setting a Time Amount

1. Press the Mode Button to select one of the three timing

modes (self-timer, interval, or long exposure).

2. Press the Jog Dial to select the time unit you wish to set.

Each time you press the dial, the time units will blink in

the following order: Seconds → Minutes → Hours, in a

456

Interval Timer Mode (continued)

3. To pause the interval timer, press the Start/Stop button. Press

it again to resume.

Note: The interval you select must be longer than than the

combined time of the shutter speed and shutter recocking time,

otherwise the result will be continuous shooting.

When you are shooting with electronic ash the time interval

you set must be longer than the ash recycle time. If the time

interval is less than the recycle time the shutter will not release

until the ash unit has recycled. With Canon Speedlites that have

the Save Energy (SE) feature, the ash will automatically recycle

one minute before the exposure.

Long Exposure Mode

1. You must set the

camera's shutter to Bulb (B),

otherwise the camera will

shoot continuously until the

exposure time you have set

expires or you run out of exposures, whichever comes rst.

2. Use the Jog Dial to set the desired exposure time.

3. Press the Start/Stop button. The exposure will start, the icon

will blink and the exposure time will begin to count down.

4. To cancel the exposure, press the Start/Stop button.

Note: For unattended shooting, focus manually. If the camera is

set to AF and is unable to nd focus it may not release the shutter.

Exposure Count

1. Press the Mode Button

to select the Exposure

Count mode.

2. Press the Jog Dial. The

exposure count digits will

begin to blink.

3. Turn the Jog Dial to the number of exposures you want, from

1 to 99. If you set the counter to 00, the number of exposures

will limited only by the amount of lm or memory card space

available.

4. Press the Jog Dial to register the number of exposures. Once

an amount has been registered the exposure count display

will no longer blink.

5. Press the Start/Stop button. The camera will begin shooting

and will continue until it completes the number of exposures

you have. The TC-80N3 will count down the number of

exposures. Unless you specify a specic interval, the exposures

will be taken at one-second intervals.

Note: When shooting a sequence of exposures with ash, set

the interval timer so that the ash will have enough time to recyle

between exposures.

Hold Function

The Hold function prevents accidental changes to your settings. It

also prevents the Start/Stop Button from accidentally stopping an

operation after it has started. To activate this function, press and

hold the Display Illuminator Button for at least three seconds until

the Hold indicator appears on the display. To cancel this function,

press and hold the Display Illuminator Button for at least three

seconds until the Hold indicator disappears.

Cancelling the Settings

Simultaneously press the Mode Button, Display Illuminator Button

and Jog Dial to cancel all settings. Setting the time or number of

exposures to 0 will cancel the respective mode.

Remote Switch Function

The TC-80N3's Release Button functions in the same way as the

Remote Switch RS-80NC. The remote switch function does not

require battery power.

As with your camera's shutter button, you can press the

Release Button either halfway or all the way. Pressing it halfway

activates your camera's autofocus and exposure meter. Pressing

it all the way will release the shutter.

For long exposures or continuous shooting, press the

Release Button completely and slide it forward, in the direction

of the Running Lock Arrow. This will lock the button in the fully

depressed position. To release the button, slide it back to its

original position.

Note: Even when the Interval Mode or Self-timer are active, you

can still take a picture immediately by pressing the Release But-

ton or your camera's shutter button. Also note that the timing or

exposure count mode you have set will not be affected if you use

the Release Button. During a long exposure that is controlled by

the TC-80N3, however, the release button will be inoperable.

ST INT LE EXP Description

• Self-timer operates

• Interval time operates

• Shutter opens for extended

time

• The set number of exposures is

taken at one-second intervals.

• • After the self-timer delay the

interval timer begins

• • After the self-timer delay the

long exposure begins

• •

After the self-timer delay the set

number of exposures is taken

at one-second intervals

• • The long exposure is taken at

the set intervals

• • The set number of exposures is

taken at the set intervals

• • •

After the self-timer delay the

long exposure is taken at the

set intervals

• • •

After the self-timer delay the set

number of exposures is taken

at the set intervals

• • •

The set number of long

exposures is taken at the set

intervals

• • • •

After the self-timer delay the set

number of long exposures is

taken at the set intervals

• • This is an incompatible com-

bination. The timer will default

to long exposure only.

• • • This is an incompatible com-

bination. The timer will default

to self-timer delay followed by

long exposure

Timer Mode Combinations

Produktspecifikationer

Varumärke:	Canon
Kategori:	Fjärrkontroll
Modell:	TC-80N3

Behöver du hjälp?

Om du behöver hjälp med Canon TC-80N3 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Fjärrkontroll Canon Manualer

Canon TC-80N3 Bruksanvisning

11 Januari 2025

Canon BG-E20 Bruksanvisning

12 Oktober 2024

Canon RS-80N3 Bruksanvisning

3 Oktober 2024

Canon BG-R20 Bruksanvisning

26 September 2024

Canon BG-R20EP Bruksanvisning

26 September 2024

Fjärrkontroll Manualer

Nyaste Fjärrkontroll Manualer

A.C.Ryan Veo Navigator Bruksanvisning

13 Januari 2025

Panasonic EUR7502XC0E Bruksanvisning

12 Januari 2025

Medion Md6461 Bruksanvisning

12 Januari 2025

Medion MD 8083 Bruksanvisning

12 Januari 2025

Medion md 4689 Bruksanvisning

12 Januari 2025

Panasonic EUR7722KC0 Bruksanvisning

12 Januari 2025

Medion MD 80383 - 8 in 1 Bruksanvisning

10 Januari 2025

Toshiba CT-CH9 II Bruksanvisning

10 Januari 2025

Motorola DRC-425 Bruksanvisning

10 Januari 2025

Panasonic EUR7502XC0EG Bruksanvisning

10 Januari 2025