Caso 3162 Bruksanvisning

Caso Matberedare 3162

Läs nedan 📖 manual på svenska för Caso 3162 (2 sidor) i kategorin Matberedare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Assembling the Pasta Maker
1. Undo the front
cover screw and
remove the cover
of the accessory
drive shaft.
2. Put on the
desired pasta
attachment
and tighten the
screw again.
Pasta roller
Pasta width:
up to 140 mm
Fettuccinecutter
Pasta width: 6.5 mm
Spaghetti cutter
Pasta width: 2 mm
Pull the adjustment knob
straight out and turn it to
adjust the pasta thickness.
Roller
adjustment Recommended use
7-8 Knead dough
5-6 Egg noodles
3-4 Spaghetti, fettuccine, lasagne noodles
0-2 Thin fettuccine, tortellini, linguini
Setting the pasta thickness
EN
Braukmann GmbH, Raieisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info@caso-design.de, www.caso-design.de
EN
1. Prepare the pasta dough and divide
it into pieces thatt into the pasta
roller.
2. Check that the pasta roller isrmly
mounted on the motor head.
3. Set the desired pasta thickness as
described above.
4. Plug the power plug into the outlet.
5. Tap the button and select a speed
level. We recommend speed level
2–6.
6. Start the appliance by pressing the
button.
7. Put theattened dough into the
rollers to knead it. Fold the dough in
half and roll again. Repeat this pro-
cess until the dough is smooth and
pliable and covers the entire width
of the roller. Reduce the roller setting
from pass to pass until you reach the
desired pasta thickness.
8. Replace the
roller with a
cutting attach-
ment of your
choice. Feed
the rolled
dough sheets
through the cutting attachment.
9. After use, switch o the appliance
with the button and pull the plug
out of the outlet.
Dust the pasta lightly with our during rolling and
cutting to make it drier and easier to separate.
The attachments are only suitable for making pasta or
rolling and cutting fondant. Do not cut or roll out any
other products with the Pasta Maker attachments.
Unplug the Pasta Maker from the power outlet before
assembling/disassembling it.
Braukmann GmbH, Raieisenstraße 9, 59757 Arnsberg, +49 (0) 2932 80554-0, info@caso-design.de, www.caso-design.de
Using the Pasta Maker
After using the Pasta Maker
1. Undo the screw to remove the
pasta attachment and ret the drive
shaft cover to the appliance.
2. To avoid damage to the appli-
ance, do not wash or immerse
the attachment in water or other
liquids. Do not clean in the dish-
washer. Use the enclosed clea-
ning brushes for cleaning.
EN

Produktspecifikationer

Varumärke: Caso
Kategori: Matberedare
Modell: 3162

Behöver du hjälp?

Om du behöver hjälp med Caso 3162 ställ en fråga nedan och andra användare kommer att svara dig


Matberedare Caso Manualer

Caso

Caso 3162 Bruksanvisning

9 September 2024
Caso

Caso KM 1800 Black-G Bruksanvisning

17 Augusti 2024

Matberedare Manualer

Nyaste Matberedare Manualer

Create

Create CHEF CHOP Bruksanvisning

15 Januari 2025
Bredeco

Bredeco BCPM-1200-EXP Bruksanvisning

15 Januari 2025
Bredeco

Bredeco BCPM-1200R Bruksanvisning

15 Januari 2025
Breville

Breville Kinetix Wizz BFP450 Bruksanvisning

14 Januari 2025
Gorenje

Gorenje S450XE Bruksanvisning

13 Januari 2025
Turbotronic

Turbotronic Samurai TT-MG10 Bruksanvisning

9 Januari 2025
Turbotronic

Turbotronic Samurai TT-MG20 Bruksanvisning

9 Januari 2025
Morphy Richards

Morphy Richards Mixstar Mixer Bruksanvisning

9 Januari 2025
Breville

Breville The Mix & Store Turbo LHM200 Bruksanvisning

9 Januari 2025
Clatronic

Clatronic KM 3350 Bruksanvisning

8 Januari 2025