Chamberlain KLIK5U-SS Bruksanvisning
Chamberlain
Garageportöppnare
KLIK5U-SS
Läs nedan 📖 manual på svenska för Chamberlain KLIK5U-SS (16 sidor) i kategorin Garageportöppnare. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/16
®®
MODEL KLIK3U-BK2
MODEL KLIK3U-SS
MODEL KLIK5U-BK2
MODEL KLIK5U-SS
UNIVERSAL REMOTE CONTROL
Your remote control can be programmed to operate
up to two devices, such as a garage door opener,
gate operator, or commercial door operator and has
a SMART/ LEARN button. Each button on the
remote control works independently of the other
and must be programmed separately. The images
throughout this manual are for reference only and
your product may look different.
STOP
Read instructions thoroughly
BEFORE beginning. If you are using
this product with residential door
openers, this product must be used
only with door openers manufactured
starting January 1, 1993 that use photoelectric
sensors located near the bottom of the door track.
IMPORTANT: The remote will activate your door or
gate during programming. Be sure the door is clear
of ALL obstructions. Start with the garage door
closed. Make sure the garage door opener has a
working light because it is a programming indicator.
WARNING: This product can expose you
to chemicals including lead, which are
known to the State of California to cause
cancer or birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
GETTING STARTED
Determine if the product you are programming the
remote control to has a SMART/LEARN button or
DIP Switches. The SMART/ LEARN button or DIP
Switches are located either on the product or in an
external receiver on or near the product. The
following instructions are for a garage door opener
with a SMART/LEARN Button. For DIP Switch
programming instructions or additional help, see
support.chamberlaingroup.com.
SMART/
LEARN Button
OR
DIP Switch
NOTE: DIP Switch is only available in KLIK3U
models.
PROGRAM TO GARAGE DOOR OPENERS
WITH A YELLOW LEARN BUTTON
If your remote was previously programmed to
another type of opener, follow the programming
instructions on the next page to reprogram to a
yellow LEARN button.
Yellow
LEARN
Button
LED
1. Start with the garage door closed.
2. Press and immediately release the yellow
LEARN button. The Learn LED glows steady
for 30 seconds. Within 30 seconds...
3. Press and hold the button on the remote
control you wish to use.
4. Release the button when the garage door
opener lights blink or two clicks are heard.
5. Test by pressing the button you just
programmed. The opener activates.
To program the remote to Chamberlain accessories,
refer to the manual provided with the accessory.
Produktspecifikationer
| Varumärke: | Chamberlain |
| Kategori: | Garageportöppnare |
| Modell: | KLIK5U-SS |
Behöver du hjälp?
Om du behöver hjälp med Chamberlain KLIK5U-SS ställ en fråga nedan och andra användare kommer att svara dig
Garageportöppnare Chamberlain Manualer
18 Oktober 2024
19 September 2024
20 Augusti 2024
20 Augusti 2024
15 Augusti 2024
14 Augusti 2024
11 Augusti 2024
10 Augusti 2024
7 Augusti 2024
7 Augusti 2024
Garageportöppnare Manualer
- Garageportöppnare Aperto
- Garageportöppnare Somfy
- Garageportöppnare Craftsman
- Garageportöppnare Marantec
- Garageportöppnare Liftmaster
- Garageportöppnare Abon
- Garageportöppnare Berner
- Garageportöppnare Hormann
- Garageportöppnare Sommer
- Garageportöppnare Novoferm
- Garageportöppnare MAC
- Garageportöppnare Superrollo
- Garageportöppnare Univer
- Garageportöppnare Dickert
- Garageportöppnare DITEC
- Garageportöppnare Geba Tronic
- Garageportöppnare Profitech
- Garageportöppnare Seculux
- Garageportöppnare Entrematic
- Garageportöppnare Skylink
Nyaste Garageportöppnare Manualer
30 September 2024
30 September 2024
30 September 2024
28 September 2024
23 September 2024
22 September 2024
20 September 2024
20 September 2024
16 September 2024
15 September 2024