Chief MSS6364B Bruksanvisning
Chief
göra multimedia
MSS6364B
Läs nedan 📖 manual på svenska för Chief MSS6364B (2 sidor) i kategorin göra multimedia. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
I N S T A L LA T I O N I N S T R U C T I O N S
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8840-000094
©2008 Milestone AV Technologies
4/08
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS
125
POUNDS (
56.74
KG).
MSB-6364
FLAT PANEL DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(1) Interface Bracket (4) Mounting Button – Tapped
(4) 10-24 x .5 Button Head Cap Screw (4) M6 x 35mm Phillips Head Screws
(4) M18 OD x 8.3 ID x 20 L Metric Nylon Spacer (4) M6 x 25mm Phillips Head Screws
(4) .75 OD x .266 ID x .375 L Nylon Spacer (1) 1/8 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
CAUTION!
Figure 1
WARNING!
NOTE: If installing screen on a Chief J-series wall mount, proceed
to Step 2 (J-Series VESA Interface Installation).
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places) (see
Figure 2 & Figure 3).
2. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display using the M6
screws (see Figure 4). For 32” and 37” screens use the longer spacer (20mm length) and M6 x 35mm screw
(see Figure 5). For 42” 46” and 52” screens use the .375” spacer and M6 x 25mm Screws (see Figure 6).
3. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting brackets
with slots in the Chief Mount. Lower safety latch on the Chief Mount to secure your display, making sure latch
is completely engaged. If using a Chief J-series wall mount, use the M4 screws provided with the wall mount
to attach the wall mount to the interface plate.
Figure 2 Figure 3
Figure 4 Figure 5 (32” & 37” SCREENS)
Figure 6 (42”, 46” & 52” SCREENS)
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | göra multimedia |
| Modell: | MSS6364B |
Behöver du hjälp?
Om du behöver hjälp med Chief MSS6364B ställ en fråga nedan och andra användare kommer att svara dig
göra multimedia Chief Manualer
29 December 2024
28 December 2024
10 September 2024
9 September 2024
8 September 2024
8 September 2024
8 September 2024
7 September 2024
7 September 2024
7 September 2024
göra multimedia Manualer
- göra multimedia Black Box
- göra multimedia Nec
- göra multimedia Peerless-AV
- göra multimedia Newstar
- göra multimedia Ergotron
- göra multimedia Premier
- göra multimedia Atdec
- göra multimedia Bretford
- göra multimedia Dataflex
- göra multimedia AmpliVox
- göra multimedia Avteq
Nyaste göra multimedia Manualer
29 December 2024
23 December 2024
23 December 2024
23 December 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
18 September 2024