Cisco 5508 Bruksanvisning

Läs nedan 📖 manual på svenska för Cisco 5508 (34 sidor) i kategorin Kontroller. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/34
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 5500 Series Wireless Controller
Installation Guide
This guide is designed to help you install and minimally configure your Cisco 5500 Series Wireless
Controller.
Compliance and Safety Information, page 1
Controller Overview, page 3
Unpacking and Installing the Controller, page 8
Using the Startup Wizard, page 24
Controller Specifications, page 31
Obtaining Documentation and Submitting a Service Request, page 31
Cisco 90-Day Limited Hardware Warranty Terms, page 31
Compliance and Safety Information
FCC Safety Compliance Statement
Modifying the equipment without Ciscos authorization may result in the equipment no longer
complying with FCC requirements for Class A digital devices. In that event, your right to use the
equipment may be limited by FCC regulations, and you may be required to correct any interference to
radio or television communications at your own expense.
2
Cisco 5500 Series Wireless Controller Installation Guide
78-18998-01
Compliance and Safety Information
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case users will be
required to correct the interference at their own expense.
Try to correct the interference by one or more of the following measures:
Verify that the ambient temperature remains between 32 to 104° F (0 to 40° C), taking into account
the elevated temperatures when installed in a rack or enclosed space.
When multiple Cisco 5500 Series Wireless Controllers are mounted in an equipment rack, be sure
that the power source is sufficiently rated to safely run all the equipment in the rack.
Verify the integrity of the electrical ground before installing the controller.
Safety Information
Safety warnings appear throughout this guide in procedures that may harm you if performed incorrectly.
A warning symbol precedes each warning statement. The warnings below are general warnings that
apply to the entire guide. Translated versions of the safety warnings in this guide are provided in the
Regulatory Compliance and Safety Information for the Cisco 5500 Series Wireless Controller document
that accompanies this guide.
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available.
Statement 1024
Statement 371—Power Cable and AC Adapter
3
Cisco 5500 Series Wireless Controller Installation Guide
78-18998-01
Controller Overview
Statement 191—VCCI Class A Warning for Japan
Controller Overview
The Cisco 5500 Series Wireless Controller is currently available in one model: 5508.
The Cisco 5500 Series Wireless Controller, designed for 802.11n performance and maximum scalability,
supports up to 250 lightweight access points and 7000 clients, making it ideal for large-sized enterprises
and high-density applications. A core component of the Cisco unified wireless solution, these controllers
deliver wireless security, intrusion detection, radio management, quality of service (QoS), and mobility
across an entire enterprise. The controllers work in conjunction with other controllers, Cisco Wireless
Control System (WCS), and access points to provide network managers with a robust wireless LAN
solution.
The Cisco 5500 Series Wireless Controller supports the OfficeExtend access point, which provides
secure communications from a controller to an access point at a remote location, seamlessly extending
the corporate WLAN over the Internet to an employees residence.
In order to best use this guide, you should have already designed the wireless topology of your network.
Because the radio resource management (RRM) feature automatically detects and configures access
points as they appear on the network, it is not necessary to have any access points on the network in order
to install and configure a controller.
Figure 1 shows the front panel of the Cisco 5508 Wireless Controller.
Warning
This is a Class A product based on the standard of the Voluntary Control
Council for Interference by Information Technology Equipment (VCCI). If this
equipment is used in a domestic environment, radio disturbance may arise.
When such trouble occurs, the user may be required to take corrective
actions.

Produktspecifikationer

Varumärke: Cisco
Kategori: Kontroller
Modell: 5508

Behöver du hjälp?

Om du behöver hjälp med Cisco 5508 ställ en fråga nedan och andra användare kommer att svara dig




Kontroller Cisco Manualer

Cisco

Cisco 8540 Bruksanvisning

22 September 2024
Cisco

Cisco 5508 Bruksanvisning

10 Augusti 2024

Kontroller Manualer

Nyaste Kontroller Manualer