Clas Ohlson ML520-11 Bruksanvisning

Clas Ohlson Skärmaskin ML520-11

Läs nedan 📖 manual på svenska för Clas Ohlson ML520-11 (12 sidor) i kategorin Skärmaskin. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

EnglishSvenskaNorskSuomiDeut s ch

Art.no Model

30-9376 ML520-11 Ver. 20140505

Tile Cutter

Kakelskärare

Flisekutter

Laattaleikkuri

Fliesenschneider

English

Adjustable guide.

Cutting angle 0–60 degrees.

Tile Cutter

Art. no 30-9376

Please read the entire instruction manual before using and save it for future use.

We apologise for any text or photo errors and any changes of technical data.

If you have any questions concerning technical problems please contact our

Customer Service Department (see address on reverse.)

Presentation

• A tile cutter for professionals. It cuts and snaps in two simple steps.

• Magnesium alloy base plate with hardened metal scoring wheel.

Can produce square or angled cuts (0–60°).

• Max. cutting length 500 mm, max. tile thickness 16 mm.

English

Straight Cuts

Set the position of the cut with the guide.

Hold the tile ﬁrmly with one hand, and with

the other apply an even and moderate

pressure down on the handle while running

the scoring wheel across the glazed surface.

The scoring wheel should just cut the glaze.

Once the glaze has been scored it is time to

snap the tile. Place the tile, glazed surface

up, on the base plate. Position the score

just under the base plate’s centre line.

Rest the breaker-bar on the tile and close to

the guide and make sure that the breaker-bar

ends are equidistant from the score.

Gently apply pressure to the handle. Do not

use more force than necessary to snap the tile

along the score!

Important!

Make sure that the scoring wheel

does not touch the base plate when snapping

the tile. If you press too hard on the handle

while snapping the tile, the tile may break

unevenly and possibly crack into several pieces.

Angled Cuts

Angled cuts are carried out in generally in

the same way as straight cuts. The only

difference is that you must set the desired

angle before scoring the tile. Use the guide

ruler and fence. Loosen the wing nut,

adjust the angle and tighten the wing nut

again before scoring.

Important! Once again, make sure that

the scoring wheel does not touch the base

plate when snapping the tile.

Replacement of Scoring Wheel

Replacing the scoring wheel requires a posidrive,

screwdriver and a 10 mm spanner to loosen

the bolt and nut which hold the scoring wheel

in place.

Produktspecifikationer

Varumärke:	Clas Ohlson
Kategori:	Skärmaskin
Modell:	ML520-11
Färg på produkten:	Black, Grey
Bredd:	917 mm
Djup:	640 mm
Höjd:	1394 mm
Snäll:	Multimediawagentje
Justerbar i höjdled:	300 mm
Antal hyllor:	0 schappen
Panelmonteringsgränssnitt:	100 x 100 mm
Antal-lådor:	0 lade(n)
Rekommenderad användning:	Vlakke paneel
Maximal skärmstorlek:	55 "
Minsta skärmstorlek:	30 "
Keyboardlade:	Nee