COLBOR SL20-B Bruksanvisning

COLBOR Lins SL20-B

Läs nedan 📖 manual på svenska för COLBOR SL20-B (7 sidor) i kategorin Lins. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Bowen Mount Spotlight User Manual
SL20-B
Caring For Your COLBOR Product
Keep corrosive chemicals, liquids, and heat sources away from the
product to prevent mechanical damage.
The product is not waterproof.
Do not leave the product unattended while in use. Keep out of reach
of children.
Do not handle it with wet hands.
Please do not block the ventilation and do not look at the light directly
when it is on.
Do not attempt to disassemble or modify the product. Doing so voids
the warranty.
Please have the product checked or repaired by authorized
technicians if any malfunctions happen.
Disconnect from the power supply when it is not in use.
Malfunction may be caused by dropping, the impact of external force.
Failure to follow all the instructions may result in mechanical damage.
Warranty does not apply to human errors.
90°
Operation Instructions
1. Check the glass and shutter blade for good condition.
2. Loosen the screws of the 7-shaped handle and adjust the bracket to
be 90° with the spotlight. Then tighten the handle screws.
Installation and Removal of SL20-B Spotlight
3. Mount the spotlight on the stable light stand, secure it with weights,
and tighten screws.
4. Pull all the shutter blades to outer edge.
5. Align the spolight with the groove around the lamp head and clip it
in, turn the spolight in the direction of the arrow, and the installation
will be completed after the top rod rebounds.
* Removal of spotlight: Please follow the instructions below.

Produktspecifikationer

Varumärke: COLBOR
Kategori: Lins
Modell: SL20-B

Behöver du hjälp?

Om du behöver hjälp med COLBOR SL20-B ställ en fråga nedan och andra användare kommer att svara dig