Conair DPSBAR Bruksanvisning

Läs nedan 📖 manual på svenska för Conair DPSBAR (1 sidor) i kategorin Duschhuvud. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Easy to Install
Step 1: Remove the old showerhead by turning it
counterclockwise (Fig. 1). Wipe off any debris from
the threaded pipe. Wrap the supplied teflon tape
clockwise around the threaded pipe (Fig. 2).
Step 2: Place the open portion of the cam-lock
onto the shower pipe and rotate the cam-lock
upward to the 12:00 o'clock position to lock
(Fig. 3). Secure the slide bar by pressing the suction
cup firmly to the wall (Fig. 4). Suction cup works
best on a clean tile surface.
Step 3: Install the diverter valve on the showerhead
pipe. Turn clockwise with your hand to tighten.
Note: Do not over-tighten. (Fig. 5). Then, install the
new wall-mount showerhead to the forward-facing
diverter opening by turning it clockwise and tight-
en by hand. If additional tightening is required,
place protective cloth on the swivel nut and tighten
with a wrench (Fig. 6).
Step 4: Attach one end of the hose to the
downward-facing diverter valve opening (Fig. 7).
Attach the other end of the hose to the hand-held
showerhead (Fig. 8) and turn clockwise to tighten
by hand.
Step 5: Rest the hand-held showerhead in the
holder when not in use (Fig 9).
Easy to Operate
Turn the 3-way diverter valve according to the
desired use (Fig. 10): wall-mount showerhead
alone (A), a combination of both showerheads (B),
or hand-held showerhead alone (C).
Fig. 10
Fig. 2
Fig. 5
Fig. 7
Fig. 8
Fig. 9
Fig. 1
Fig. 6
Fig. 3
Fig. 4
Fig. 10
A
BC

Produktspecifikationer

Varumärke: Conair
Kategori: Duschhuvud
Modell: DPSBAR

Behöver du hjälp?

Om du behöver hjälp med Conair DPSBAR ställ en fråga nedan och andra användare kommer att svara dig