Cotech Z1J-TD10-13E Bruksanvisning

Cotech Borrmaskin Z1J-TD10-13E

Läs nedan 📖 manual på svenska för Cotech Z1J-TD10-13E (48 sidor) i kategorin Borrmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/48
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg om
at du forstår dem, før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
ENGLISHSVENSKANOR SKSUOMIDEUTSCH
Ver. 20130905
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no. Model
18-3176 Z1J-TD10-13E-UK
40-7965 Z1J-TD10-13E
Slagborrmaskin
Slagboremaskin
Iskuporakone
Schlagbohrmaschine
Hammer Drill
2
ENGLISH
Hammer Drill
Art.no. 18-3176 Model Z1J-TD10-13E-UK
40-7965 Z1J-TD10-13E
Please read theentire instruction manual before using theproduct and save it for future
reference. We reserve theright for any errors in text or images and any necessary
changes made to technical data. If you have any questions concerning technical
problems please contact our Customer Services (see address on reverse).
General Safety Requirements
Warning! Read all theinstructions. Failure to adhere to thefollowing instructions may
lead to electric shocks, fires and/or serious injury. The term “power tools” in thewarning
text below refers to your handheld mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) The work space
a) Keep thework space clean and well illuminated. Cluttered and areas invite
accidents.
b) Do not use electrical hand tools in explosive environments, i.e. nearby flammable
liquids, gas or dust. Electrical hand tools generate sparks that
could easily ignite dust or fumes.
c) Keep away from children and other spectators while using theelectrical hand
tool. Interference can make you loose your concentration and control.
2) Electrical safety
a) The electrical hand tools plug must fit correctly in thewall socket. Never modify
theplug in any way. Never use anadaptor together with earthed electrical hand
tools. Unmodified plugs and suitable wall sockets decreases therisk of electric
shock.
b) Avoid body contact with earthed objects, such as pipes, radiators, ovens
or refridgerators. There is anincreased risk of electrical shock if your body
is earthed.
c) Do not expose theelectrical hand tool to rain or other wet conditions. If water
gets inside anelectrical hand tool it increases therisk of electrical shock.
d) Do not misuse thelead. Never use thelead to carry, drag or pull theplug out of
thewall socket. Keep thelead away from heat, oil, sharp edges and movable
parts. Damaged or tangled leads increases therisk of electrical shock.
e) When you use anelectrical hand tool outdoors; use anextension cord suitable
for this purpose. Use of anextension cord for outdoor use decreases therisk of
electrical shock.
3
ENGLISH
f) If for some reason you must use apower tool in awet environment, always
connect it to themains via anearth-fault circuit breaker such as anRCD (residual
current device). Using anRCD significantly reduces thechances
of you receiving anelectric shock.
3) Personal safety
a) Pay attention to what you do and use common sense when using electrical hand
tools. Never use anelectrical hand tool if you are tired or under theinfluence of
drugs, alcohol or medication. One moment of not paying attention while using
anelectrical hand tool may result in serious injury.
b) Use protective equipment. Always use safety glasses. Using protective
equipment such as aface mask, slip resistant protection shoes, ahelmet and ear
defenders when needed decreases therisk of injury.
c) Avoid accidental starting. Make sure that theswitch is set to OFF before you
connect thedevice to thewall socket. Never carry anelectrical hand tool with
one finger on thetrigger or never connect thehand tool to awall socket when
theswitch is set to ON, since it may result in injury.
d) Remove all service tools/keys before switching on thehand tool. A service tool
forgotten on arotating part of theelectrical hand tool may result in injury.
e) Do not overreach. Make sure you stand steady and well balanced
at all times. This gives better control in unexpected situations.
f) Wear suitable clothing. Do not wear loose fitting clothes or jewellery.
Keep hair, clothes and gloves away from movable parts. Loose fitting clothes,
jewellery or long hair could get caught in movable parts.
g) If theequipment for suctioning or collecting dust is available make sure
it is connected and used properly. Using technical aid may decrease dust related
hazards.
4) Use and maintenance of the electrical hand tools
a) Do not overdrive thehand tool. Use ahand tool suitable for thework you are to
perform. The correct electrical hand tool will perform thetask better and safer if
used at thecorrect feed rate.
b) Never use theelectrical hand tool if theswitch does not work properly to turn
on and shut off thetool. All electrical hand tools that can not be operated by
theswitch are dangerous and must be repaired.
c) Unplug thelead from thewall socket before making any adjustments, changes of
accessories or storing theelectrical hand tool away. These precautions reduces
therisk of unexpected start of theelectrical hand tool.
d) Store electrical hand tools that are not being used out of reach from children.
Electrical hand tools can be dangerous if they get in thehands
of inexperienced users.

Produktspecifikationer

Varumärke: Cotech
Kategori: Borrmaskin
Modell: Z1J-TD10-13E

Behöver du hjälp?

Om du behöver hjälp med Cotech Z1J-TD10-13E ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Cotech Manualer

Cotech

Cotech CDD10180T52S Bruksanvisning

2 September 2024
Cotech

Cotech Z1J-TD10-13E Bruksanvisning

29 Augusti 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Metabo

Metabo PowerMaxx BS 12 BL Bruksanvisning

9 Januari 2025
Makita

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025
Holzmann

Holzmann SB 4116HN Bruksanvisning

7 Januari 2025
Bavaria

Bavaria BCD 12/1 Bruksanvisning

7 Januari 2025
Einhell

Einhell BT-ID 710 E Bruksanvisning

7 Januari 2025
DeWalt

DeWalt DCB126 Bruksanvisning

6 Januari 2025
MSW

MSW -DMS400 Bruksanvisning

5 Januari 2025
DeWalt

DeWalt DCD1624 Bruksanvisning

3 Januari 2025
DeWalt

DeWalt DW9106 Bruksanvisning

31 December 2025
Gude

Gude GTB 16/12 R+L Bruksanvisning

31 December 2025