Crestron CP3 Bruksanvisning
Crestron
Tunn klient
CP3
Läs nedan 📖 manual på svenska för Crestron CP3 (32 sidor) i kategorin Tunn klient. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/32
Crestron CP3 & CP3N
3-Series Control Systems
Operations Guide
This document was prepared and written by the Technical Documentation department at:
Regulatory Compliance
These products are Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.
As of the date of manufacture, the CP3 and CP3N have been tested and found to comply with specifications
for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, 3-Series, 3-Series Control System, Core 3, Core 3 OS, Core 3 UI, Cresnet, Crestron Fusion, Crestron Mobile, Crestron
Mobile Pro, Crestron Toolbox, e-Control, Fusion RV, RoomView, and SystemBuilder are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Android is either a trademark or registered trademark of Google, Inc. in the United States
and/or other countries. BACnet is either trademarks or registered trademarks of American Society of Heating, Refrigerating and Air-Conditioning
Engineers, Inc. in the United States and/or other countries. iPad and iPhone are either trademarks or registered trademarks of Apple Inc. in the United
States and/or other countries. Blu-Ray Disc is either a trademark or registered trademark of the Blu-ray Disc Association (BDA) in the United States
and/or other countries. Microsoft, Internet Explorer, and Windows are either trademarks or registered trademarks of Microsoft Corporation in the
United States and/or other countries. Other trademarks, registered trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
©2012 Crestron Electronics, Inc.
Crestron CP3 & CP3N 3-Series Control Systems
Operations Guide – DOC. 7316B Contents
i
Contents
3-Series Control Systems: CP3 & CP3N 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Specifications ..............................................................................................................4
Physical Description....................................................................................................6
Setup ........................................................................................................................................ 11
Network Wiring.........................................................................................................11
Identity Code ............................................................................................................. 11
Installation ................................................................................................................. 11
Hardware Hookup .....................................................................................................13
Additional Configuration...........................................................................................15
Programming Software............................................................................................................ 16
Software Requirements for the PC ............................................................................ 16
Programming with SystemBuilder ............................................................................16
Programming with D3 Pro.........................................................................................16
Programming with SIMPL Windows........................................................................ 17
Uploading and Upgrading........................................................................................................ 18
Establishing Communication.....................................................................................18
Control Subnet (CP3N Only) .................................................................................... 19
Programs and Firmware ............................................................................................20
Configure for Operations .........................................................................................................21
Set Date & Time........................................................................................................ 21
Online Configuration................................................................................................. 21
Problem Solving ......................................................................................................................23
Troubleshooting......................................................................................................... 23
Check Network Wiring..............................................................................................24
Reference Documents................................................................................................ 25
Further Inquiries ........................................................................................................ 25
Future Updates ..........................................................................................................26
Return and Warranty Policies ..................................................................................................27
Merchandise Returns / Repair Service ...................................................................... 27
Crestron Limited Warranty........................................................................................27
Produktspecifikationer
| Varumärke: | Crestron |
| Kategori: | Tunn klient |
| Modell: | CP3 |
Behöver du hjälp?
Om du behöver hjälp med Crestron CP3 ställ en fråga nedan och andra användare kommer att svara dig
Tunn klient Crestron Manualer
8 September 2024
8 September 2024
Tunn klient Manualer
- Tunn klient Samsung
- Tunn klient HP
- Tunn klient Acer
- Tunn klient Akasa
- Tunn klient Black Box
- Tunn klient Fujitsu
- Tunn klient Evga
- Tunn klient Dell
- Tunn klient Viewsonic
- Tunn klient Foxconn
- Tunn klient Moxa
- Tunn klient Advantech
- Tunn klient ELO
- Tunn klient Dell Wyse
- Tunn klient Lindy
- Tunn klient NComputing
- Tunn klient Mobotix
Nyaste Tunn klient Manualer
3 Oktober 2024
25 September 2024
24 September 2024
24 September 2024
18 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024