CRRCpro GP50R Bruksanvisning

CRRCpro Motor GP50R

Läs nedan 📖 manual på svenska för CRRCpro GP50R (7 sidor) i kategorin Motor. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
CRRCpro GP50R
Gasoline Engine
Thank you very much for choosing this engine. Hope it will bring you a
good happy time. In order to get a good operation, please read the
instruction in detail as below.
I
Parameter
Type Two-stroke piston valve petrol aircraft engine
Displacement(cc): 50.8cc
Bore x Stroke 43mm×35mm
Carburettor Walbro(Diaphragm & Butterfly Valve)
Max. Output 5.4PSps/7800rmp
RPM Range 1300-7600rpm
Weight: About 1740gWithout ignition battery
Ignition power DC 4.8 Volts (4 cell NiCad or NiMh battery,
ensure battery have max. electric currency
of 0.5A or use 5V stable power supply)
1
Fuel mixture
(Ratio of gasoline and oil): 25-35 : 1
Propeller 22X8, ,22X10 23X8
24X6(2-blade prop.)
WARNING
1This engine is specially designed for the airplane model. Please
don’t use for any other purpose.
2We’re responsible for the replacement due to our manufacturing
defect. However, we don’t take charge of inproper operation,
unfamiliar repair work, re-build without permission or using non-
original parts.
3Attention! This engine is not a toy. Any misuse may cause serious
injury or even death. Please read it carefully to know how to use &
operate.
II
Notice before assembling & starting engine
1Make sure there is a specially designed and firmed engine
assembling position on your model. If not, it can assemble onto the
airplane to break-in.
2Fix the engine properly.
3Have adequate airflow & cooling for the engine. Supply big enough
exhaust hole as to cool the engine.
4Use an approved propeller and spinner. Tighten and balance the
propeller correctly, and check it from time to time.
5Mount the ignition properly and avoid overheating.
6Use suitable battery and switch which should match with your ignition.
7Use suitable fuel tank and fuel line(Tygon) for the engine.
8Use suitable fuel mixture(gas & oil) to ensure good break-in & flying.
9Ensure fuel is clean.
10Keep engine clean enough that it will not affect the heat elimination.
11Ensure the airplne model is fixed firmly, then start the engine.
12Start your engine in a perfect way.
13Adjust the carburettor correctly(Don't adjust the high/low speed
needles in random if you’re not 100% certain).
2
14Ensure that your spark plug is in good condition and is tightened
correctly.
15Make sure all the spectators are behind the propeller to avoid the
accidents which caused by the propeller.
16Wear suitable clothes. Don’t wear necktie, jewellery etc. in order to
avoid the wrapping by running propeller.
17After engine started, please stay behind the running propeller. Don’t
stand in front of it or beside it.
18Don’t test & start engine on a soft sand or stone place. It will
damage the engine easily.
19Please operate the engine in a well-ventilated place. Otherwise, the
exhaust gas will aect your health.
20Be careful to the operated engine as it is hot.
DECLARATION: We cannot control the safe operation of our products. So
we’re not responsible for the injuries or loss due to in-proper operation.
III
Carburettor settings
Every engine is inspected & operated strictly before packing. The basic
3

Produktspecifikationer

Varumärke: CRRCpro
Kategori: Motor
Modell: GP50R

Behöver du hjälp?

Om du behöver hjälp med CRRCpro GP50R ställ en fråga nedan och andra användare kommer att svara dig