Crucial CT32G4SFD832A Bruksanvisning

Crucial Inte kategoriserad CT32G4SFD832A

Läs nedan 📖 manual på svenska för Crucial CT32G4SFD832A (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
Install Guide
Memory Module Installation
Equipment needed
• Memory module(s)
• Non-magnetic-tip screwdriver (for removing the cover
on your computer)
Your systems owner’s manual
Installation process
1. Make sure that you are working in a static-safe environment.
Remove any plastic bags or papers from your work space.
2. Shut down your system and make sure the power is
completely o before unplugging the power cable from your
computer. For laptops, then remove the battery.
3. Hold the power button for 3-5 seconds to discharge residual
electricity.
4. Remove your computer’s cover. Refer to your owner’s
manual for how to do this.
1
The memory & storage experts
2
5. To protect your new memory modules and your systems
components from static damage during the installation
process, touch any of the unpainted metal surfaces on
your computer’s frame before handling and installing
memory.
6. Using your systems owner’s manual, locate your
computer’s memory expansion slots. Do not use any
tools in the removal or installation of memory modules.
7. Insert your new memory module(s) in accordance with
the illustrations in this guide. Align the notch(es) on the
module with the notch(es) in the slot, and then press the
module down until the clips on the slot snap into place.
(It can take 20 to 30 pounds of pressure to install a
module.) Fill the memory slots on your computer starting
with the highest density (i.e. put the highest density
module in bank 0).
8. Once the module(s) have been installed, replace the
cover on your computer and reconnect the power cord or
battery. Installation is now complete.
DIMM installation
Using firm, even pressure, push DIMM into slot until
clips snap into place. Do not assist clips.
SODIMM installation
Firmly push the SODIMM in at a 45-degree angle,
and then push down until clips snap into place.
When it is fully seated in the slot, one-sixteenth of an inch or less
of the gold pins will be visible.
Helpful hints & troubleshooting tips
If your system does not boot, check the following:
1. If you receive an error message or hear a series of beeps,
your system may not be recognizing the new memory.
Remove and reinstall the modules to ensure they are
securely seated in the slots.
2. If your system wont boot, check all of the connections inside
your computer. It is easy to bump a cable and pull it out of its
connector, disabling devices such as your hard drive or
CD-ROM. If your system still wont reboot, contact Crucial
Technical Support.
3. When restarting your system, you may get a message
prompting you to update the configuration settings. Refer to
your owner’s manual for information. If you are still unsure,
please call Crucial Technical Support for assistance.
4. If you get a memory mismatch message, follow the prompts
to enter the Setup menu, and then select Save and Exit.
(This is not an error—some systems must do this to update
the system settings.)
If you have any issues with installation, contact Crucial
support with any questions or concerns.
3

Produktspecifikationer

Varumärke: Crucial
Kategori: Inte kategoriserad
Modell: CT32G4SFD832A

Behöver du hjälp?

Om du behöver hjälp med Crucial CT32G4SFD832A ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Crucial Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer