CRUX CTR-01Q Bruksanvisning

Läs nedan 📖 manual på svenska för CRUX CTR-01Q (6 sidor) i kategorin övervakningskamera. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
Universal Wireless Truck Camera
CTR-01Q
R
INTERFACING SOLUTIONS
APPLICATIONS:
Use on trucks, SUVs, RVs, Buses and other vehicles that require wireless reverse camera solution.
FEATURES:
- 2.4 GHz, 20 Channel Frequency Hopping Method for clear image.
- 120 eective viewing angle.
- 8 IR LEDs for up to 10M visibility at night.
- Waterproof camera and transmitter (IP 69K).
o
PARTS INCLUDED:
1 / 6 rev.071317
Transmitter Receiver
Pushbutton Switch
1. Find a suitable place to install a camera. 2. Testt the bracket to make sure there is enough space.
3. Use the screws provided to mount the bracket.
4. Install the camera to the bracket. Do not completely tighten
the screws yet.
5. Below is how the camera should be installed. 6. Mount the transmitter no more than 3 feet from the camera.
7. Clean the surface where the transmitter will be mounted. 8. Attach the double sided adhesive tape to transmitter.
Universal Wireless Truck Camera
CTR-01Q
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
INSTALLATION INSTRUCTIONS:
2 / 6 rev.071317
9. Press down on the transmitter to adhere to the surface. 10. Attach the 4 L brackets to surface using the screws provided.
11. Use the cable ties to securely fasten the transmitter.
12. We recommend putting silicone sealant around the base of the
transmitter to prevent dirt from going behind the transmitter.
Universal Wireless Truck Camera
CTR-01Q
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
13. Disconnect the reverse light connector. 14. Strip the power and ground wires of the reverse light.
15. Tap the red and black wires of the CTR-01Q camera cable to
the positive and negative wires.
16. Reconnect the reverse lconnector.
3 / 6 rev.071317

Produktspecifikationer

Varumärke: CRUX
Kategori: övervakningskamera
Modell: CTR-01Q

Behöver du hjälp?

Om du behöver hjälp med CRUX CTR-01Q ställ en fråga nedan och andra användare kommer att svara dig




övervakningskamera CRUX Manualer

CRUX

CRUX CSV-TYS Bruksanvisning

26 September 2024
CRUX

CRUX CSV-FD15 Bruksanvisning

26 September 2024
CRUX

CRUX CSV-TUN Bruksanvisning

26 September 2024
CRUX

CRUX CSV-TYH Bruksanvisning

26 September 2024
CRUX

CRUX CMB-18SY Bruksanvisning

26 September 2024
CRUX

CRUX CGM-03EY Bruksanvisning

26 September 2024
CRUX

CRUX CTR-01Q Bruksanvisning

26 September 2024
CRUX

CRUX CUL-13 Bruksanvisning

26 September 2024
CRUX

CRUX CUL-16 Bruksanvisning

26 September 2024
CRUX

CRUX CTM-11YBM Bruksanvisning

26 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer