CyberPower CSPS12V36W Bruksanvisning

CyberPower Inte kategoriserad CSPS12V36W

Läs nedan 📖 manual på svenska för CyberPower CSPS12V36W (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

PRODUCT OVERVIEW

1. Pass through AC outlet

2. Network Interface Reset Button

3. Cable Guard

4. AC Input Plug

5. 3-Pin Connect

WARNINGS

• Review the following important safety warnings to avoid bodily

injury or damage to equipment during installation or operation

of this device.

• Read All instructions before attempting to install or operate

this device.

• This device is intended for indoor use only. To prevent the risk

of ﬁre or electrical shock, install in dry location free from damp

or wet environment, or potentially damp or wet environment.

• Adhere to all acceptable operating environment limitations as

listed to prevent the risk of ﬁre or electrical shock (See

speciﬁcations within user manual)

• NO user-replaceable parts within this device. To avoid bodily

injury, risk of ﬁre or electrical shock, do not attempt to remove

cover of device.

• Device is not designed for use with any alternate connection to

AC power than as stated within user speciﬁcations of this

user manual.

PACKAGE CONTENTS

• 1 x Switching Power Supply

• 1 x 3-Pin Connector

• 1 x User Manual

• 3 x Cable Ties

USER MANUAL

ONT POWER SUPPLY

CSPS12V36W

ONT POWER SUPPLY

CSPS12V36W

INTRODUCTION

Inspect CSPS12V36W for any visible damage before proceeding to

the following steps. If CSPS12V36W shows visible signs of any

damage at time of unpacking, then device should not be installed.

INSTALLATION

1. Plug 3-pin connector with attached cable into DC/Control

terminal output.

2. Using provided cable ties, secure cable to cable guard running

cable through provided holes in cable guard.

3. Plug CSPS12V36W into an AC outlet.

NOTES:

• Network Interface Reset Button - Allows for reset of DC power

output when pushed and held for 5 seconds. This provides

reset/reboot option for Optical Terminal Network (ONT) without

having to unscrew CSPS12V36W from wall plate mount, unplug

and replug at AC outlet in order to reset DC power output.

• Please use the CSPS12V36W in safe environment (Pass through

AC outlet working power higher than 1200W are not allowed)

A. NEGATIVE (-) / COMMONLY BLACK WIRE

B. POSITIVE (+) / COMMONLY RED WIRE

C. CONTROL (BATTERY CHARGE/COMM.ONLY)

A B C

CyberPowerSystems.com

All other trademarks are the property of their respective owners.

K01-0000854-00

FCC NOTICE (FOR USA)

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Note: The Grantee is not responsible for any changes or

modiﬁcations not expressly approved by the party responsible for

compliance. Such modiﬁcations could void the user's authority to

operate the equipment.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

To maintain compliance with FCC's RF exposure guidelines, this

equipment should be installed and operated with a minimum

distance of 20cm between the radiator and your body.

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

SPECIFICATIONS

INPUT

Input Type

Voltage Range

Frequency

Nominal Voltage

Surge Resistance

Network Interface Reset Button

OUTPUT 1

Output Type

Output Voltage (Same as Input voltage)

Frequency (Same as Input Frequency)

Max Current Limit

Max Watt Limit

OUTPUT 2

Output Type

Output Voltage

Output Current

Continuous Power

Eciency

Voltage Control

PHYSICAL

Dimensions (in)

Weight (lb)

ENVIRONMENT

Operating Temperature

Storage Temperature

Operating Humidity

Operation Elevation

Environmental

NAME 5-15P

100 – 240 Vac

50/60 Hz

120 Vac

IEC 61000-4-5

Yes

NAME 5-15R

100 – 240 Vac

50/60 Hz

10 – 5 Amp

1200 Watt

3 position terminal (IDC)

12 Vdc

3 Amp (Max)

36 Watt (Max)

88%

5 Vdc (5mA DC Max)

5.55 x 2.69 x 2.22

0.374

-40 C ~ +40 C° °

-40 C ~ +45 C ° °

5 ~ 95%

< 5,000 ft

RoHS Compliant

Produktspecifikationer

Varumärke:	CyberPower
Kategori:	Inte kategoriserad
Modell:	CSPS12V36W
Färg på produkten:	Zwart
Vikt:	340 g
Bredd:	138 mm
Djup:	66 mm
Höjd:	24 mm
Förpackningens bredd:	86 mm
Djuppackning:	30 mm
Förpackningshöjd:	206 mm
LED-indikatorer:	Ja
Batterikapacitet:	15000 mAh
Typ av förpackning:	Geschenkdoos
Nuvarande:	2 A
På / Av knapp:	Ja
Snabbladdning:	Ja
Form:	Rechthoek
Antal per paket:	1 stuk(s)
Inspänning:	5 V
Laddningskälla:	USB
Spännande:	5 - 9 V
Laddare kompatibilitet:	Universeel
Ingångsgränssnitt:	Micro-USB + USB Type-C
USB A-utgångsportar:	2
Antal USB Type-C-portar:	1
Batteriteknik:	Lithium-Polymeer (LiPo)
Snabbladdningsteknik:	Quick Charge 3.0
Port 1 utgångsström:	3 A
Port 2 utgångsström:	3 A
USB Type-C-kontakt:	Ja
Port 3 utgångsström:	2 A