CyberPower OL6KRT2UTF Bruksanvisning

Läs nedan 📖 manual på svenska för CyberPower OL6KRT2UTF (12 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
Users Manual
Step-Down Transformer
OL6KRT2UTF
OL8K10KRT3UTF
OL6KRT2UTFHW
OL8K10KRT3UTFHW
CyberPower Systems (USA), Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Phone: 877-297-6937
Fax: 952-403-0009
www.CPSww.com
K01000021200
Copyright © 2011 CyberPower Systems, Inc.
OVERVIEW
The CyberPower Step-Down Transformers support installation with power cord L6-30P (OL6KRT2UTF / OL8K10KRT3UTF) or hardwire (OL6KRT2UTFHW /
OL8K10KRT3UTFHW), and are designed for a variety of CyberPower UPS systems. When combined with the UPS, the Step-Down Transformer converts
voltage from 200-240V down to 100-120V.
1
UNPACKING
2U or 3U Step-Down Transformer
User’s manual Registration card
Rackmount left rail Rackmount right rail
Tie plate (1) * 1 set
2U or 3U Rackmount ears (Stands) (2) * 1 set
Flat head screws: M5X8L (8) * 1 set
Pan head screws: M5X12L (12) * 1 set
Plastic washers (8) * 1 set
Screw hole dust covers (10) * 1 set
Input terminal block cover
Copyright © 2011 CyberPower Systems, Inc.
HARDWARE INSTALLATION
HARDWARE INSTALLATION
These versatile Step-Down Transformers can be mounted in a rackmount
or vertical tower orientation. This versatility is especially important to
growing organizations with changing needs that value having the option
to position a Step-Down Transformer on a floor or in a rackmount system.
Please follow the instructions below for the respective mounting methods.
SAFETY PRECAUTIONS
CAUTION! To prevent the risk of fire or electric shock, only use the
supplied hardware to attach the mounting brackets.
RACKMOUNT INSTALLATION
Step 1: Rackmount ears installation
Attach the two rackmount ears to the Step-Down Transformer using the
provided screws M5X8L*8pcs.
Step 2: Rackmount rail Installation
The rails adjust to mount in 48-cm (19-inch) panel racks from 52 to
91.5cm (20.5 to 36 inches) deep. Select the proper holes in the rack for
positioning the Step-Down Transformer in the rack. The 2U Step-Down
Transformer takes up position 1 through position 6. The 3U Step-Down
Transformer takes up position 1 through position 9.
Step 3: Adjust rackmount rails to fit your rack
Attach the rackmount rail to your rack with two M5X12L screws and two
plastic washers at the front of the rack. (Located in position 1 & position 6)
Do not tighten the screws. Adjust the rail size on the rail assembly of your
rack. Secure the rail to the rear of the rack with two M5X12L screws and
two plastic washers. Tighten all screws at the front and rear of the rail.
Place the Step-Down Transformer on a flat stable surface with the front of
the unit facing toward you. Secure the Step-Down Transformer to your
rack with four M5X12L screws at the front of the rack. The 2U Step-Down
Transformer takes up position 2 through position 5. The 3U Step-Down
Transformer takes up position 2 through position 8.
CAUTION! The Step-Down Transformer must be installed above the
power module.
2

Produktspecifikationer

Varumärke: CyberPower
Kategori: Inte kategoriserad
Modell: OL6KRT2UTF

Behöver du hjälp?

Om du behöver hjälp med CyberPower OL6KRT2UTF ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad CyberPower Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer