D-Link ANT24-0401 Bruksanvisning

D-Link TV-antenn ANT24-0401

Läs nedan 📖 manual på svenska för D-Link ANT24-0401 (23 sidor) i kategorin TV-antenn. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/23
CAUTION!!
Please always put the surge protector
indoors and near the device
side, if you cannot keep it indoors,
use the tapes to wrap all the connectors
as pictures showed below.
Option: Ultra low-loss cable LMR400
Length options: 3M/6M/9M
Option: Surge protector
Connectors: N-plug to N-jack
ANT24-SP Surge protector
Installation guide
for outdoor antenna-kit
Step 1
loosen the screw from the surge protector.
Step 2
get a normal conductive copper wire with 2 sides stripped long enough to be conductive,
these wires can lead high voltage surges into the grounding.
Remark:
(1) for the ground screw you use, we suggest the longer (deeper into ground) the better performance it has.
(2) please use a copper wire with diameter at least from 2.0mm, the thicker the diameter, the higher
voltage it can sustain.
Option (1) Option (2)
Ground
Step 3
find a conductive material nearby the antenna installation sites, connect another end of the wire
into position, there are several options:
(1) Use a long screw to stick into the ground tightly, connect another wire onto.
(2) fix or solder another end of wire onto a steel material/ bar under steel construction,
such as wall for buildings, railings or other conductive materials which set up from
the ground.

Produktspecifikationer

Varumärke: D-Link
Kategori: TV-antenn
Modell: ANT24-0401

Behöver du hjälp?

Om du behöver hjälp med D-Link ANT24-0401 ställ en fråga nedan och andra användare kommer att svara dig




TV-antenn D-Link Manualer

TV-antenn Manualer

Nyaste TV-antenn Manualer