Da-Lite 82969 projection screen Bruksanvisning

Da-Lite Projektionsduk 82969 projection screen

Läs nedan 📖 manual på svenska för Da-Lite 82969 projection screen (4 sidor) i kategorin Projektionsduk. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
Operating Instructions for
MODEL C
The Da-Lite Difference.
WALL MOUNTING
1
TO OPEN SCREEN
Pull down on pull bail until desired picture area is obtained. Lock into position as on a window shade. Be sure surface is
locked before releasing.
1. Select fasteners of proper type for wall or ceiling involved.
2. Insert fasteners through proper openings provided in back side of end caps.
3. Attach screen securely to studding or other solid surface - never to plaster only.
4. MAKE SURE SCREEN IS MOUNTED LEVEL.
YOU HAVE MADE A WISE SELECTION…
in choosing a Da-Lite projection screen, designed and engineered to produce the sharpest,
most pleasing pictures with maximum convenience.
CEILING MOUNTING
1. Heavy screw hooks may be installed into wood joists. Other types of hooks or chain may be used for other ceilings or
for stage installations.
2. Insert hooks or chain through proper openings provided in sides of end caps. Screen must hang so that flat back of
case is perpendicular to floor.
3. MAKE SURE SCREEN IS MOUNTED LEVEL.
TO RE-ROLL YOUR PICTURE SURFACE
The Model C operates on the same principle as a window shade. Pull down about 4 inches to disengage the locking dog
and start the fabric up firmly and quickly.
Large picture surfaces are heavy and will start up too slowly to prevent the locking dog from catching unless help is
provided, so keep picture surface moving briskly.
Should the locking dog catch, pull the picture surface down about 4 inches and start the surface up rapidly.
However, do not permit the picture surface to roll up uncontrolled, particularly the last few feet. Allowing the bottom slat
to strike the case uncontrolled may result in severe damage to your screen. Use the cord provided for control.
To view an online Model C retraction tutorial, please visit http://www.da-lite.com/products/product_flash/modelC.
PROTECT YOUR SCREEN
Before re-rolling surface into case, examine both front and back of surface to be sure they are free of foreign matter.
2
SUGGESTED METHODS OF INSTALLATION
MODEL C EXCLUSIVE FEATURES
Easily Installed
Multi-Purpose End Caps Form Sturdy Brackets for Wall/Ceiling Installation
Aluminum Slat Saddle Distributes Uniform Tension on Picture Surface
Heavy Duty Grooved Metal Roller Assures Permanent Fastening of Picture Surface
Nylon and Ball Bearing Roller Mounting
Handsome, Rugged, Powder Coated Steel Case
Floor Stand Accessory
Floating Mounting Brackets
Ceiling Trim Kit
(optional at extra cost)
FOR WALL
FOR
CEILING
WALL MOUNTED
PICTURE SURFACE
PICTURE SURFACE
CEILING HANGING
PICTURE SURFACE
USE No. 6 BRACKETS TO HANG
BEHIND BEAM OR VALANCE
PICTURE
SURFACE
CONCEALED
(ALLOW ROOM FOR ACCESS)

Produktspecifikationer

Varumärke: Da-Lite
Kategori: Projektionsduk
Modell: 82969 projection screen

Behöver du hjälp?

Om du behöver hjälp med Da-Lite 82969 projection screen ställ en fråga nedan och andra användare kommer att svara dig




Projektionsduk Da-Lite Manualer

Projektionsduk Manualer

Nyaste Projektionsduk Manualer