DayStar Filters Solar Scout Bruksanvisning

Läs nedan 📖 manual på svenska för DayStar Filters Solar Scout (16 sidor) i kategorin Teleskop. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
DAYSTAR FILTERS
SOLAR SCOUT 80mM
DEDICATED SOLAR TELESCOPE
Congratulations on your purchase of a Solar Scout 80mm dedicated
Hydrogen Alpha solar telescope. Please read this manual before using
the product.
To begin, plug in the included power supply, then insert a diagonal
in the rear of the telescope, and insert an eyepiece or camera in the
diagonal. Turn the tuning knob to point straight away from the LED
light. When the light turns green in about 5-10 minutes your
viewing experience can begin. Align the telescope to the Sun by
observing the white screen on the rear of the bullet nder. Twist
the large red focus grip multiple revolutions to achieve sharpest
focus.
For assistance:
Call: 1 (866) 680-6563
Email: service@daystarlters.com
Visit: http://www.daystarfilters.com
Cautions & Warnings:
There are no user serviceable parts inside the telescope. Do not
diassemble the unit. Certain components are under pressure and
disassembly can cause permanent damage. All elements are required
for proper operation and removal of any internal component will cause a
malfunction that could result in unltered light which can cause blindness
or damage to equipment.
Solar Observing with a telescope is sensitive to certain risks.
Caution and care of the telescope and lter is advised in
assembly, use and dismantling at all times.
Telescope owners must use caution when afxing the lter to the
telescope never to point any telescope at the sun without the
solar lter safely installed rst.
While observing, owners must take care and caution that all
parts of the lter and telescope assembly are properly aixed
and that no pieces have been opened, tampered with or
removed.
Owners must also use caution when the telescope is being
assembled and dismantled to assure the telescope is never
pointing at the sun without the solar filter unit properly
installed.
Responsible owners will be prudent to inform guest or novice
observers of the special nature of the telescope conguration so
not to imply that telescopic observing of the sun is safe without
proper ltration.
A few very important points that owners and operators must
understand:
DayStar lters are rear-mounted and can be applied to a
choice of telescopes if applied properly. If application is
incorrect, the lter will not perform as specified.
DayStar Filters are interference lters. If light reaches a
DayStar Filter at an angle, it will cause wavelength
wingshift.
Changing the DayStar lters are temperature sensitive.
temperature will change the wavelength (CWL) that the filter will
transmit. Users need to be aware of temperature tuning issues.
USAGE:
The Scout is an F/4.1 native achromatic doublet objective with an
integrated 4.3x telecentric barlow, this results in a 1400mm F/17 image
to provide the best performance.
Because of the included barlow, and ample backfocus is available and a
large magnification is achieved with normal focal length eyepieces.
The lter must be plugged in using the supplied power supply. The
etalon cavity is precision heated to regulate the wavelength of the lter
output.
Any other USB power source you wish to use must be rated for at least 2
amps at 5 volts. Computer USB ports and cell phone chargers do not
normally support this much power.
After letting the filter come up to temperature and settle, the light will turn
green and viewing can begin.
Knob tuning:
If the image lacks contrast, you may need to adjust the center
wavelength of the lter.
A knob is provided to adjust the center wavelength of the lter. Turn the
knob counter clockwise to lower the wavelength towards the blue by up
to 0.5Å. Turn clockwise to raise the wavelength towards the red by up to
0.5Å. Each click of the knob is 0.1Å.
Heavy accessories or a loose connection can cause droop, which results
in blue shift. Turn the knob clockwise 2-3 clicks and wait 5-10 minutes to
see if the view is improved.
Additional tuning can be performed, just keep in mind that after every
adjustment of the knob the lter must settle in temperature for
approximately 5-10 minutes before your change becomes eective.
Tuning can also be used to observe Doppler shifted features moving
towards or away from you. A feature moving towards you will be brighter
in blue (counterclockwise) wing shift, away from you will be reddened
(clockwise knob tuning).

Produktspecifikationer

Varumärke: DayStar Filters
Kategori: Teleskop
Modell: Solar Scout

Behöver du hjälp?

Om du behöver hjälp med DayStar Filters Solar Scout ställ en fråga nedan och andra användare kommer att svara dig