Delta Dore Tyxal+ DMBE Bruksanvisning

Läs nedan 📖 manual på svenska för Delta Dore Tyxal+ DMBE (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
www.deltadore.com
2xLS 14500 - 3.6 V / 5.2 Ah - Lithium
Consumption stand-by : 14 µA
Consumption : 26 mA max
X3D alarm : [868 - 868.6] MHz
et [868.7 - 869.2] MHz
100 m 300mÝ
Maximum power radio < 10 mW,
receiver category: 2
-10°C / +70°C
-20°C / +60°C
IP IP 55
75%
56 x 235 x 128mm
Important
product information ( )¸
520 gr.
Instructions
Important
Product
Informations
Contents
DMBE TYXAL +
EN Installaon guide
* Up to 10 years valid under the conditions of use specifi ed in the installation instructions and
the General Conditions of Sale
- 2 -
N°1
N°2
DMBE TYXAL+ is a passive infrared motion detector, de-
signed to detect the infrared radiation emitted by human
bodies.
This motion detector aims to protect the outside of a
building by detecting intrusions prior to penetration into
the premises.
As soon as a presence is detected, it raises the alarm.
• Associated to a control unit:
- alarm signal.
- pre-alarm signal: as soon as a person enters the
protected zone, a sound and visual signal (outdoor siren)
warns you of the imminent alarm.
For optimal operation, please comply with the following recommendations:
In the event of non-compliance, the product may present malfunctions or
may not function optimally.
Installation height: between 0.8 m and 1.2 m
Install the motion detector vertically, with its
high detection zones parallel to the ground.
If the detector is installed at an angle,
detection reliability may be compromised.
Read the entire guide before starting
to install the device.
!
Note
This product detects temperature differences between moving and background targets within the
detection zone.
If the target remains motionless, the motion detector cannot detect it. This may affect the detec-
tor's maximum detection range.
2. Location
1. Presentation 2. Location
EN
- 4 -
A
B
UP
ÊË
Ì
Do not touch the lenses.
!
Remove the fi xing screw from
the top cover and withdraw
the cover.
Remove the fi xing screws
from the rear mount.
Remove the rear mount.
By moving it away from the base.
By sliding it upwards.
B
A
Do not touch the mirrors.
¹
Attach the rear mount (foam
pad facing down) using the
assembly jig included in the
assembly pack.
Assembly
jig
3. Mounting 4. Activation
EN

Produktspecifikationer

Varumärke: Delta Dore
Kategori: Inte kategoriserad
Modell: Tyxal+ DMBE
Färg på produkten: Wit
LED-indikatorer: Activiteit
Ethernet LAN: Ja
Medföljande kablar: LAN (RJ-45)
Antal Ethernet LAN (RJ-45)-portar: 1
Antal per paket: 1 stuk(s)
Modulation: 1024-QAM, 16-QAM, 256-QAM, 4096-QAM, 64-QAM, 8-QAM, BPSK, OFDM, QPSK, ROBO
Gränssnittstyp Ethernet LAN: Fast Ethernet
Ethernet LAN, dataöverföringshastigheter: 10, 100 Mbit/s
Nätverksstandard: IEEE 802.3, IEEE 802.3u
Säkerhetsalgoritmer som stöds: 128-bit AES
Stöder Windows: Ja
Snabbinstallationsguide: Ja
Maximal dataöverföringshastighet: 500 Mbit/s
Plugg: Type C
Wifi: Nee
AC-ingångsspänning: 100-240 V
AC-ingångsfrekvens: 50 - 60 Hz
Drifttemperatur (TT): 0 - 50 °C
Inbyggt uttag: Nee
PowerLine standard: HomePlug AV

Behöver du hjälp?

Om du behöver hjälp med Delta Dore Tyxal+ DMBE ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Delta Dore Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer