Digitus DA-81606 Bruksanvisning

Digitus Dokumentförstörare DA-81606

Läs nedan 📖 manual på svenska för Digitus DA-81606 (3 sidor) i kategorin Dokumentförstörare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/3
Cross-Cut Shredder X5
Manual
DA-81606
2
Cautions
1. In case of any danger immediately switch off and unplug the shredder from the mains.
2. Keep children away from this machine. The design and safety concepts are based on adult
dimensions to ensure it can be safely operated by adults only.
3. Do not place hands or fingers into the shredder throat as serious injury could result.
4. Keep all loose articles of clothing, ties, jewelry, hair or other small items away from the feed
opening to prevent injury.
5. Remove all paper clips and staples from paper before shredding. Unit will cut staples, however
it is not recommended.
6. Do not immerse the shredder, power cord or plug in liquids. Keep aerosol sprays away from this
machine.
7. Continuous shredding of computer paper should not exceed 2 minutes. If continuous use is
required, it is recommend that the shredding time should be 2 minutes on, at least 60 minutes
off to allow for proper cooling of the motor.
8. The socket outlet shall be installed near the equipment and shall be easily accessible.
9. Always turn off or unplug the shredder prior to moving, cleaning or emptying the wastebasket.
10. The maximum number of sheets that can be shredded at any one time is 5 sheets of 80gsm paper.
Thicker paper should be shredder singly.
11. Empty wastebasket frequently.
S etup
1. Place the shredder securely on the top of the wastebasket.
2. Plug the power cord into any standard 230-240V
3. Place the Main Switch in the AUTO position
Operating the shredder
There are four operating modes:
1. When AUTO is selected, the shredding process is started automatically by inserting the paper
into the feed opening. The shredder will stop automatically when the paper has completed its
travel through the feed opening.
2. REV is used to assist in the removal of a paper jam, which reverses the shredding process prior
to a completed cycle, thus clearing the cutters.
3. OFF position is recommended when emptying the wastebasket or when the shredder is not in
use for a prolonged period of time.
4. Clear: In AUTO mode, press to clear jammed paper.
Shredder capacity
Cross-Cut Shredder X5 will shred 5 sheets at once and will accept paper widths up to . When 220mm
shredding small material like envelopes or credit card receipts, insert them through the middle of
the feed opening.
3
Paper jams and overloads protection
Cross-Cut Shredder X5 is equipped with a motor overload protection device, the normal short
time 2 60 shredding at maximum capacity is minutes on and at least minutes off. The power may
terminate automatically in case of the following abnormal situations:
1. Operating the shredder at the maximum capacity continuously for a prolonged period of time,
e.g. More than 2 minutes without stopping.
2. Exceeding the shredding capacity, e.g. Inserting more than 5 sheets at one pass, or if the paper is
not fed squarely into the feed opening.
Both abnormal operations may result in the activation of the automatic motor overload protection, which
terminates the power to the unit. If this occurs you should:
1. Unplug the power cord from the AC outlet and wait at least 60 minutes for the overload
protection to reset. Tear or cut off any excess paper from the top of the shredder.
2. Plug the power cord back into the AC outlet and place the Switch in REV. Pull the remaining paper
out of the cutters. Place the Switch back to the Auto position if necessary.
3. With the Switch in the AUTO position and the feed opening clear, you are now ready to resume
normal shredding.
Clearing the cutter heads
If fibrous paper is being shredded, the cutters may clog. Move the switch alternately between CLEAR
and REV 2- 3 times to clear any paper shreds attached to the cutters.
Specifications
Shred t ype : Cross Cut
Shred s ize : 4*40MM
Shredding capacity : 5 Sheets
Feed opening : 220MM
Input : 0- A 23 240 0.8V/50 Hz;
Shredder dimension : 3 85 15 (L) x 1 (W) x 410 (H)mm
Bin v 10L olume:
This equipment is not intended for use by children. Avoid touching the media feed opening with the
hands, clothing or hair. Unplug this equipment when not in use for an extended period of time,
Hazardous moving part is in this equipment, keep body parts away from
moving parts.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content.
If the Declaration of Conformity is missing, you can request it by post under the below mentioned
manufacturer address.
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany

Produktspecifikationer

Varumärke: Digitus
Kategori: Dokumentförstörare
Modell: DA-81606

Behöver du hjälp?

Om du behöver hjälp med Digitus DA-81606 ställ en fråga nedan och andra användare kommer att svara dig


Dokumentförstörare Digitus Manualer

Digitus

Digitus DA-81606 Bruksanvisning

15 December 2024
Digitus

Digitus DA-81608 Bruksanvisning

11 September 2024
Digitus

Digitus DA-81605 Bruksanvisning

9 September 2024
Digitus

Digitus DA-81607 Bruksanvisning

12 Augusti 2024

Dokumentförstörare Manualer

Nyaste Dokumentförstörare Manualer

Fieldmann

Fieldmann FZD 4015-E Bruksanvisning

19 December 2024
Fieldmann

Fieldmann FZD 4014-E Bruksanvisning

19 December 2024
Fieldmann

Fieldmann FZD 4020-E Bruksanvisning

15 December 2024
Pyrex

Pyrex Multi 700 Inox SB-223 Bruksanvisning

10 December 2024
Pyrex

Pyrex Multi SB-224 Bruksanvisning

10 December 2024
Bonsaii

Bonsaii C261-D Bruksanvisning

7 December 2024
Dahle

Dahle 808 MS Bruksanvisning

7 December 2024
Dahle

Dahle PS 420 Bruksanvisning

7 December 2024
Olympia

Olympia PS 58 CC Bruksanvisning

27 Oktober 2024
Olympia

Olympia PS 53 CC Bruksanvisning

27 Oktober 2024