Digitus DS-55100-1 Bruksanvisning

Digitus AV extender DS-55100-1

Läs nedan 📖 manual på svenska för Digitus DS-55100-1 (8 sidor) i kategorin AV extender. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
HDMI EXTENDER SET, FULL HD
Manual
DS-55100-1
The Digitus HDMI Extender Set, Full HD offers an extender solution of up
to 50 m for the highest demands. It is used to transmit digital video and
audio signals to a maximum length of up to 50 m. The highest supported
video resolution is 1080p / 60Hz. The transmitter unit features an EDID
switch, which can be used to regulate resolution and audio format of the
output signal. The transmitter also has an HDMI Loop Out Port, which
allows you to connect a local monitor. Thanks to PoC (Power over Cable)
support, it is only the transmitter unit that needs to be powered. The
package includes two bidirectional infrared units (transmitter, receiver),
which can be used for the remote control of the connected input source.
Important Safety Notice
Please read below safety instructions carefully before installation and
operation:
1. Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR
blaster extension cable and IR receiver extension cable before
installation.
2. Do not hot plug when it is working.
3. Use DC5V power supply only. Make sure specification matched if
using adapters not supplied by factory.
4. This HDMI Extender supports POE to power the receiver (Connect
power supply to the transmitter only and receiver is powered by the
Transmitter). Please note that this HDMI Extender cannot use with
switch or router.
Product Features
1. Include a transmitter unit (TX) and a receiver unit (RX), working
as a pair.
2. Support resolution is up to full HD 1080p@60Hz.
3. Use CAT6/6A/7 for long distance transmission.
4. Transmission distance up to 50 meters via CAT6 cable.
5. Uncompressed and zero latency.
6. With EDID switch for setting a very needed HDMI signal format
7. Support POE to power the receiver from transmitter.
8. Support IR pass-back for remote control source device from
receiver site easily.
9. Plug and play, without installation.
Package Contents
Transmitter unit
(Tx) × 1pcs
Receiver unit
(Rx) ×1pcs
User manual×1pcs
IR blaster extension
cable ×1pcs
IR receiver extension
cable×1pcs
Power supply×1pcs
Specification
Part No. DS-55100-1
Technical Receiver-RX Transmitter-TX
HDCP compliance 1.2a
Video bandwidth 225MHz (10.2Gbps)
Video support 480I/P, 576I/P, 720P, 1080I/P, 3D
Audio support PCM, AC3, DTS
Input TMDS signal 1.2Vp-p
Input DDC signal 5V
ESD protection 8KV
EDID support yes
loop-out on TX one HDMI loop-out on TX
POE support RX powered by TX
IR pass-back yes
IR frequence
Range (KHz) 20-60KHz
Mechanical Transmitter-TX Receiver-RX
Housing Metal enclosure
Dimensions 71.6 x 66.9 x 22.6mm 71.6×66.9×22.6mm
Net weight 70g 70g
Fixedness wall-mounting case with screws
Power supply 5V2A
Consumption 3W 3W
Operation
temperature 0~40°C
Storage temperature -20~70
°
C
Relative humidity 0~95%(non-condensing)
Installation Requirements
1. HDMI source device (computer graphics card, DVD, PS3, HD
monitoring equipment etc.).
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
3. UTP/STP CAT6/6A/7 cable, follow standard IEEE-568B.
(It is suggested to use shielding network cable to avoid interference
based on CE requirement)

Produktspecifikationer

Varumärke: Digitus
Kategori: AV extender
Modell: DS-55100-1

Behöver du hjälp?

Om du behöver hjälp med Digitus DS-55100-1 ställ en fråga nedan och andra användare kommer att svara dig




AV extender Digitus Manualer

AV extender Manualer

Nyaste AV extender Manualer