DOD Chthonic Fuzz Bruksanvisning

DOD Inte kategoriserad Chthonic Fuzz

Läs nedan 📖 manual på svenska för DOD Chthonic Fuzz (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
HOW IT WORKS:
O ut Control: utp
This control is used to set the
output level of the pedal.
Fuzz Control:
This control is used to
control the intensity of
the fuzz. Turn left for
less fuzz, right for more.
Output Connector:
Connect this to the input
Lustre Control:
This control allows the player
to turn down high frequencies
after the main distortion
stages of the pedal.
LED Power Indicator
This lights up when the
pedal is on.
Footswitch
Placement of the DOD nChtho ic Fuzz:
Input Connector:
Connect your instrument
or the output of another
connector.
Setup of the DOD o :Chth nic Fuzz
Start with all the controls at 12:00, their midpoint.
Then adjust to taste. If the result is too extreme,
then turn the Fuzz and Lustre controls down
to a lower setting.
All settings will be heavily dependent on the
and playing style.
Power Supply Connector:
Connect a 9VDC PS0913BDC
power supply (optional) to this
connector.
chain. This will allow it to interact with the guitar
pickups and volume control.
the best results, and rolling it back to 7 or 8 will
allow the Chthonic to clean-up to a nice overdrive.
Rolling the guitar volume to 5 will yield sparkling
clean tones.
This sensitivity also makes the Chthonic react to
the capacitance of longer cables, so try to keep the
cable to the input to the Chthonic as short as
possible. Also avoid having any pedals before the
RECOMMENDED SETTINGS FOR DIFFERENT PICKUPS
CHTHONIC FUZZ
[
[

Produktspecifikationer

Varumärke: DOD
Kategori: Inte kategoriserad
Modell: Chthonic Fuzz

Behöver du hjälp?

Om du behöver hjälp med DOD Chthonic Fuzz ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad DOD Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer