DOD Gonkulator Ringmod Bruksanvisning

DOD oklassificerad Gonkulator Ringmod

Läs nedan 📖 manual på svenska för DOD Gonkulator Ringmod (3 sidor) i kategorin oklassificerad. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
1 3
4 5
6
7
9
8
2
1. GAIN - adjusts the amount distortion gain.
2. DIST - adjusts the distortion output level.
3. OUTPUT - adjusts the overall output level of the eect.
4. FREQ - adjusts the carrier frequency for the ring modulation eect.
5. RING - adjusts the ring modulator eect output level.
6. INPUT - connect your instrument here.
7. FOOTSWITCH - turns the eect on and o.
8. LED - turns on when the eect is enabled.
9. OUTPUT - connect to the next pedals input or to the input of your amplier.
USING GONKULATOR:
With the Gonkulator having a built-in distortion, most guitarists/
bassists will favor placing it at the beginning of their chain of
eects, so start with that placement.
A typical eects signal chain will consist of Distortion eects rst
then Modulation eects (Chorus, Flanger, Phaser, Tremolo, etc...)
next and then nally Time based eects (Delay and Reverb).
The fact that Gonkulator can also be a standalone ring modulator,
you can place it in the middle or the end of the eects chain with
good results. You can always experiment with dierent eect
placements to get it working best for your rig.
SPECIFICATIONS:
Input 1/4” TS Unbalanced - 470
Output 1/4” TS Unbalanced - 100 Ω
Current Draw 20 mA
Bypass True Bypass
Power 9VDC alkaline battery (not included)
HARMAN PS0913DC power adapter (optional)
Warranty 1 Year
DOD
10653 River Front Parkway
South Jordan, UT 84095
USA
801-566-8800 Rev A - 6/15

Produktspecifikationer

Varumärke: DOD
Kategori: oklassificerad
Modell: Gonkulator Ringmod

Behöver du hjälp?

Om du behöver hjälp med DOD Gonkulator Ringmod ställ en fråga nedan och andra användare kommer att svara dig